***Note: We will be changing handle names over to IA Performance in the Month of Sept. Same great service, but a more recognizable handle name :D

Ver8 twin scroll complete turbo assembly + SS flanges in stock!!!

Check out our other vendor postings here:
Suspension/Brakes/Handling
http://forums.nasioc.com/forums/showthread.php?t=735011 (http://forums.nasioc.com/forums/showthread.php?t=735011)

Drivetrain (RA gearsets, 6 Speeds, Complete JDM r180 rear ends)
http://forums.nasioc.com/forums/showthread.php?t=753174

Interior (Sti Wagon interior and Right Hand Drive Conversion)
http://forums.nasioc.com/forums/showthread.php?t=790312

Exterior/Dressup (JDM Takeoffs)
http://forums.nasioc.com/forums/showthread.php?p=10124678#post10124678.php?p=10124 004#post10124004 (http://forums.nasioc.com/forums/showthread.php?p=10124004#post10124004)

****If you would like updates regarding all new arrival JDM parts please email back with the subject line:

JDM New Arrival Mailer

An email will be sent out with links and info regarding all new items that we receive. To unsubscribe simply email us back and we'll remove your name from the mailers.

info@iaperformance.com

NOTE: we have every possible nut/bolt/pipe/hose imaginable for your motor build up. Please email for parts not listed in here.

PAYPAL, CC, checks, cash all accepted




JDM wrx 2.0L Turbo motor (special order only), comes similar to this one. Very low run time. Good compression results as well. $1699 + ship.

Ver8/9 twin scroll exhaust flanges (5 left)- $58 + ship

Laser cut to perfection (not some flame cut piece of junk)
New and made specifically for IA Performance
100% perfect fit every time
Perfect to retro fit yoru single scroll downpipe to a twin scroll unit (for ver8/9 jdm twin scroll turbos only)l
3/8" thick stainless steel (rust free)
http://128.121.78.143/iaperformance/Admin/PhotoGallery/UploadImages/v8flanges.jpg
IHI

New VF34 turbos- $799 + ship, only 1 at this price
VF37 Twin Scoll Complete Setup, note downpipe flange included, no downpipe though- $1650
http://www.iaperformance.com/gallery.asp?photoNumber=586

WALBORO pumps- $89 + ship, in stock

Helix

Helix Catless Dowpipes- $280 shipped, 2 in stock
Helix Catted Downpipes- $385 shipped, 1 in stock
Helix Catless Uppipe- $175 shipped, 9 in stock
HKS

Carbon Ti Catback - $749 shipped, 1 in stock
Ver8 Sti Items

Ver8 Budget Long Blocks- $3495 + ship, special order
Ver8 Short Blocks- $1295, special order
Ver8 Twin Scroll VF37 complete setups- $1650 + ship now with new twin scroll specific gaskets included at no cost
Ver8 Twin Scroll Gaskets (20 + sets in stock) 3 gaskets per set. $52 SHIPPED
Ver8 JDM ECUs, drive by cable, not by wire like USDM ver8 Sti. Direct drop in for WRX cars - $550 in stock
PLUS MUCH MORE NOT LISTED HERE!!!!
Ver7 Sti Items

Ver7 Budget Long Blocks- $3350 + ship, special order
Ver7 Short Blocks- $1250, special order
Ver7 JDM ECUs, drive by cable, not by wire like USDM ver8 Sti. Direct drop in for WRX cars - $550
PLUS MUCH MORE NOT LISTED HERE!!!!
Stephen
www.IAPERFORMANCE.com (http://www.iaperformance.com/)
http://www.iaperformance.com/images/iasignature.gif (http://www.iaperformance.com/)
1687 W Grant Rd #102, Tucson, AZ85745
520-882-2821, 520-232-3709 fax, M-F 10am-7pm
Click on the Ebay Button for current auctions
http://pics.ebaystatic.com/aw/pics/navbar/eBayLogoTM.gif (http://motors.search.ebay.com/_W0QQsassZiaperformance)

SICK ASS PRICES!!!!!!!!!! V8 STi heads for $2000????!!!!!! MAN!! Don't I wish I had the loot??!!!!!

The oil cooler you list for the STI V7. Is that the factory water to oil cooler, and do you have all the parts required to install it..

If so I will take it.

J

Holy great price on the twin scroll!!!

What is the sensor in the T.S. DP right near the inlet?

Originally posted by 03WRXMA
Holy great price on the twin scroll!!!

What is the sensor in the T.S. DP right near the inlet?

Yeah, my new V7 motor could use that bad boy too!!!!!!! :disco: WTG Stephen, hookin up the sickmadcrazy prices!!!!!!!

Jeffg- here ya go :D

http://www.iaperformance.com/specialsImages/small_DCP_3599.JPG (http://www.iaperformance.com/gallery.asp?photoNumber=388)

03wrxma- That would be the JDM 02 sensor I believe. There is not one pre turbo on the twin scroll.

:D Thanxs,Stephen. can wait to put it on.:rolleyes: :lol:
Steve.

np, tracking number to follow tomorrow. Thanx for the support :banana:

turbo inlet pipe for $20, is that the pipe that get in to the turbo or the Y-pipe you are talking about? Is that the silicone one or still plastic? Can it bolt on to stock TD04 And also the V8 crank pulley, are they lighter, can it bolt on to stock WRX motor and use stock belts? Sorry for all these Q because I really don't know the different.

Please see photos below of the turbo inlet tube. The ends are dimensionally the same as the stock wrx one so it will fit your accordian piece and still slide over your turbo. The advantage is in the overall girth that it retains. Item is still plastic/rubber combination.

http://www.iaperformance.com/specialsImages/small_DCP_3597.JPG (http://www.iaperformance.com/gallery.asp?photoNumber=386)

http://www.iaperformance.com/specialsImages/small_DCP_3596.JPG (http://www.iaperformance.com/gallery.asp?photoNumber=385)

JDM crank pullies are roughly the same weight (possibly a pinch more) than the wrx ones. They have added rubber dampened centers to allow for aided balance at high rpm (sti red line at 8K-8200 depending on model). OVerall same size and allows you to run the same wrx belts.

Do you have a Complete STI V7 engine(with ecu and eng mount...everything) for swap?
I need 1...

I'll have a few to choose from in 2 weeks time. TMIC, ecu, etc all included. Plug and play. please email me and I will save the contact info for when they arrive. stephen@iaperformance.com

Thanks Stephen
Just sent Paypal

money received, many thanx. Items ship tomorrow UPS.

Interested in the solenoids. Sent you a PM.

Hmmm...I see some parts that we could use for some conversions:)

You have a pm.

Chris
I-Speed USA
cescamillla@i-speed.us

I will take the oil cooler... I assume you take paypal, which address do I use.

any chance there is a thermostat housing that I can add to this? I need the housing that has the extra nipple on it for the cooler.

J

do you have a pic of that ver 8 coolant inlet? will this bolt up to an STi shortblock with SOHC heads so i dont need to cut my stock one?

thanks

Ben

Digging through the PM's now and replying to all. Thank you for your patience.

jeffg-payment may be sent to info@iaperformance.com, any chance you have a photo of the thermostat housing you are describing? I believe you are talking lower water pump assembly, but I could be completely wrong. If possible please reference it in a photo, tons of photos here :

Click for more photos
http://www.iaperformance.com/specialsImages/full_DCP_3367.JPG (http://www.iaperformance.com/gallery.asp?folderNumber=22)

Ben- you are able to see it here on a DOHC equipped motor. I am not sure about fitment on a SOHC long block though.
Click to enlarge
http://www.iaperformance.com/specialsImages/small_DCP_3366.JPG (http://www.iaperformance.com/gallery.asp?photoNumber=362)

Stephen
www.IAPERFORMANCE.com
Subaru Audio Upgrades, Click the Subaru
http://www.iaperformance.com/images/iasignature.gif (http://www.iaperformance.com)

Stephen, I just sent you a PM. Hopefully you can help me out :).

Hmmm...... heads/intake manifold

Rick

Dibs on the Ver. 7 Alternator (if it's the 90 amp one). If the Ver 8 is the same, I'll take whichever:D

Leo

from my research they are both 90amp. No problem with shipping to PR. :D

Here is a pic of the part I am looking for. It bolts to the bottom of the motor and contains the thermostat.

REMOVED PIC.. thanks scoobymods.

Let me know if we can work out a package shipped to 83713, and possibly 2day. I would love it by this weekend.

J

Maicca- we accept, paypal, visa, mastercard, discover, american express, cashier's checks, and cash for locals.

Click to enlarge. Great condition.
http://www.iaperformance.com/specialsImages/small_DCP_3606.JPG (http://www.iaperformance.com/gallery.asp?photoNumber=372)
http://www.iaperformance.com/specialsImages/small_DCP_3607.JPG (http://www.iaperformance.com/gallery.asp?photoNumber=391)

jeffg- I do not have that part. It appears to be an entirely different water pump assembly than the sti ones. RS?

Stephen, did you get my PM earlier this morning?

Rick

pm'ed you.
jeff

does the ver 8 intercooler come with all the necessary hardware to bolt onto my 04 WRX? Also will it work with my perrin intercooler hose kit? If so what would the shipping costs be to 48167...Thanks

slvrwrx13- Direct fit on 04 unlike the USDM sti ones. I will include the mounting brackets as well. Perrin hose bolts right up with your current stock wrx end tank inlets. Direct swap over. Shipping/handling $20.

Replying to all Pm's now.

Originally posted by East Coast Scooby
jeffg- I do not have that part. It appears to be an entirely different water pump assembly than the sti ones. RS?

Looking at the pic you posted the housing is totally differnet

anyway.. if you dont have it, I will just order a new one.

Is $30 shipped good for the cooler to 83713 or how much shipping to I need?

J

you're close enough to AZ that $30 shipped will work. Pop over paypal or phone in at 520-820-2771.

Stephen
www.IAPERFORMANCE.com
Subaru Audio Upgrades, Click the Subaru
http://www.iaperformance.com/images/iasignature.gif (http://www.iaperformance.com)

hey stefen,

do u have any more oil coolers in stock? wot do they come with

thanks

tino- I have a v7 oil cooler assembly up for grabs. Same as this one. Email for payment info.

http://www.iaperformance.com/specialsImages/small_DCP_3599.JPG (http://www.iaperformance.com/gallery.asp?photoNumber=388)

How much are you selling for the complete twinscroll setup?

Jin

Ok, so how much shipped to PR?

Once I know, I'll PM AmEx info.

Leo

interested in the sti timing belt and crank pully to replace the stock parts on my wrx. Is the crank pully in good condition? No rust, ect? Are the alignment marks still present on the belt? and are they in the same positions as the wrx belt. I am super interseted. Thanks.

Hey bro,

How will the sti head be used with a tec-ii since it's a different spark plug boot :(?

latinskllz, not sure how to implement a Tec-ii to our motors.

shields102-Sti timing belt has same dash marks on it. I believe they are still quite noticable, but just incase I can send a print out from the manual showing the correct placements. No rust on the crank pulley. Great shape with mounting bolt.

Leo-Alternator, shipped. PM or email for details. American Express is accepted :D

Just updated the listing. V7 intake manifold and pictures have now been added. If you would like to pair it up with some STI risers I'll do the grouping for $240 SHIPPED

Originally posted by East Coast Scooby

Intake Manifold w/ Stock Fuel Rails ONLY [b]SOLD, but 1 more arriving late this week. Update to follow once they do

[color=red]The best part about this entire manifold is that it eliminates the restrictive TGV risers. They are 100% gone, not cut out, but gone. The entire manifold is cast as one solid piece. Fewer chances for inlet leaks and great potential for top end power. See photo of an assembled manifold(note price is only for manifold and ruel rail system). Direct bolt on to wrx throttle body, and heads. No clearance issues.

How much were these?

Kevin

$350 + ship. Next one should be here next Mon or Tues.

I am looking into getting a 2.5 block for my 2002 WRX and building it up. If I got the V8 heads, is it possible to wire in the AVCS if I got the proper ECU?

Also, do you have any of the STi tumbler housings without the butterflies? If not, it's no problem. I have an extra set of WRX ones I can dismantle.

Let me know, I am very interested,
Nick

I am also interested in the Version 7 shortblock. Could you hold it for me until tonight? I will get back to you today as to if I want it or not. My friend might be interested in it and I need to get ahold of him.

Let me know,
Nick

Stephen, sent you a PM.

Rizzo314- drop me a phone nuymber where I may reach you. I'll be in the shop later on today, just not sure when yet. I'll be making more ported TGV housings this weekend too.

gpatmac- you have a reply :D

I sent you a PM with my number. Do you still have both the v7 and v8 blocks? I just need to figure out which one I want and I will let you know tomorrow.

I will get one of them, just not sure which one.

Nick

I believe both are still unsold.

edit: The v7 short block and heads may be sold, pending payment on Monday afternoon.

damn! missed out on the twin scroll! any idea on when youll have another deal like that! or if you have another?

-mikey

I will give you a call tomorrow afternoon. I had to go out of town to the middle of now where and had no cell signal so I didn't get your voice mail until later.

I'll call around 12 Indiana time, which should be about 10 or so your time.

Nick

Rizzo314-Sounds good to me.

mcu81-I should have one more twin scroll available in 1 weeks time. Please email me if you would like to be put on a mailer for that particular motor part out.

Is this the same timing belt in the SPT catalog? Is it the pink belt? This will fit an 02 WRX, correct?

Also, will the 2.5 Heads bolt up to a WRX shortblock? I have a bit of a valvetrain tick and am wondering if these heads will cure my problem.

Thanks,
Kevin

Sent you an email regarding my oil cooler package.

Thanks guys.. quick shipment.

J

kevin02wrx- the heads are actually 2.0L heads. They do bolt right up to both a ej205 and ej257 block. The belt is black in color with subaru in pink and the part number in pink. It is a tad faded, but still readable. Stiffer compound than the wrx belt.

Jeffg- you have an email, bolt will be there tomorrow.

Ver.7 throttle body: is this larger or flows more than one in a usdm '02 wrx? would this bolt in w/o problems such as emissions or electrical? Thanks, rex.

You guys are amazing.. :D

J

i am interested in the ver 7 oil cooler setup and the sti motor mounts if they stil

i am interested in the ver 7 oil cooler setup and the sti motor mounts if they still for grabs

The v7 sti throttle body appears to be the same as the wrx one in just about every way. They are a great option for those wanting to do some porting/polishing or for those that have a spare motor build up going on.

-oil cooler is pending payment. Please email me so I can let you know if the buyer backs out. info@iaperformance.com

got any pics of the v7 oil cooler and fill neck??

Click to enlarge the photos:

This is a v8 one, but the v7 looks identical:

http://www.iaperformance.com/specialsImages/small_DCP_3599.JPG (http://www.iaperformance.com/gallery.asp?photoNumber=388)

The spare fill neck I have looks just like this one. Comes with yellow oil cap too:
http://www.iaperformance.com/specialsImages/small_DCP_3581.JPG (http://www.iaperformance.com/gallery.asp?photoNumber=374)

sweet deal on the heads stephen! someone buy these heads before i do:( :disco:

Peter

Originally posted by East Coast Scooby
$350 + ship. Next one should be here next Mon or Tues.

Have any pictures by any chance? Any idea how it works on a STi? Is it compatable with USDM STi injectors? (I have UR injectors and rails that fit the sti)

Kevin

USDM sti is side fed injectors which mount differently where as the jdm v8 injectors are still top fed just like the USDM wrx is.

http://www.iaperformance.com/specialsImages/full_Copy%20of%20DCP_2820.JPG

Is the coolant tank you have for $30. the cast one next to the intake manifold and if it is, does it have the gray bolt down lid?

Leo, I have one of each. ONe black top reservoir and one silver topped one. Your pick.

I'll take a silver one.

Leo:banana:

Leo-you have a PM

will the v7 ecu run the v8 heads

I'll take the v8 90amp alternator off your hands. djnoose2002@yahoo.com

raazin-v7 ecu should run the avcs on the v8 heads. For optimal power increases I would suggest additional tuning (i.e. reflash on jdm sti ecu, etc)

dj_noose- you have an email

bump

bump for an awesome guy. :disco:
jeff

Bump for my buddy ;) Lookin good man!!!

E-mailed ya on the TGV risers... thanks,eric

wanted to say that I ordered parts from ecs and the service was excellent. Parts were in the condition he said they were and he even included pages from the service manual to make my life easier.

Bump for a great vendor.

fyi for future searchers....

sti crank pully weighs exactly 1lb. more then stock wrx. That 1lb is all rubber.

Sti timing belt has tick marks in exactly the same places as stock wrx.

JDM A/C compressors are 5lb less compared to USDM A/C compressors for all of you race junkies.

Hey East Coast Scooby, If you come across a water pump or radiator you don't need, please let me know. PLEASE! I'd love to take it off your hands.

will do, 2 more v7 sti motors are sitting here being stripped this week.

will do, 2 more v7 sti motors are sitting here being stripped this week.

Thank you very much!

i need a v.8 STi intake manifold. please let me know when you get another one. thanks!

naylor, you've been added to the list. Next shipment should arrive at teh month's end, but hopefully sooner.

can you pm me a price?

thanks
ryan naylor

Do you have any JDM STi intercooler?

Brian

Hi - I am interested in a higher "capacity" steering pump for driving a quick ratio rack in a '02 WRX sedan - do the v7 or v8 pumps offer improved "capacity" over the '02 WRX pump ? And if so, any stock and how much ? Cheers.
:confused:

Stephen said that the store would be closed for the rest of the week. I am not sure if this means he won't be answering any questions. If he doesn't answer you right away, he will as soon as he can.

Nick

pmed on sti throttle body and risers...

We're back open and quickly filling orders and answering emails. Thank you for bearing with us during this time.

redcoupe- 1 v7 sti TMIC in stock, I can email you the picture later on today. Please drop me an email at info@iaperformance.com regarding it.

works- you have a pm back

synersia- I am not sure if teh capacity is larger on the sti pumps or not. They are designed to work with the jdm quick ratio sti racks. I have 1 v8 sti in stock.

Stephen is one class guy! I just received all the parts I ordered from him and all I can say is BEAUTIFUL!!! The heads are pristine!

v8 complete heads w/ cam sprockets
v7 ecu
JDM motor wiring harness
v8 intake manifold
JDM A/C compressor
Throttle body
JDM Timing assembly w/ covers
v7 oil pan assembly (dipstick, oil pickup, oil pan)

And he even threw in some freebies! Great Vendor!!!:)

Me---->:banana:

Steve- Thanks for bringing the heads, etc. out to LA with you on the plane. Everything looks perfect and the rest of the parts arrived a couple of days after. Let me know what you can do on the engine wiring harness and if you have a JDM ECU for the AVCS heads lying around, I might take that off your hands too.

Thanks again,
-Steve

Stephen.Ramm@aerosim-research.com

Steve- We have a few harnesses on hand, you have an email :D

redleader- good to see everything is in order and that another 2.5L will soon menace the streets of WA.

pm sent!

you have a reply

cool, got it thanks! :D

Do you have STi:

timing belt
intake manifold
passenger side exhaust cam sprocket
passander side rear timing cover
clutch release bearing in great shape that would work on my WRX

Shoot me an email atl02wrx@thinkturbo.com

Erik

Erik- you have email

Do you have any more STi ver.7 Intercooler kits?

If not can you get just the STi silicone y-pipe?

CtGT- fresh out at this time.

Good condition JDM STI Intercooler. This IC is 40% larger than the US-WRX and 14% Larger than the US-STI intercooler. Includes 2 stock mounting brackets (same as wrx brackets)

http://www.iaperformance.com/gallery.asp?photoNumber=439

http://www.iaperformance.com/gallery.asp?photoNumber=391



Turbo inlet pipe (same as US WRX) $10

Total price for these 2 and if you ship to Puerto Rico, PM me when you can.

Randy

East Coast Scooby - shipped out the downpipe yet?

Shuji

the short block that you is that a v7 or v8

shuji- yup, the pipe shipped on Tuesday. I need to dig up the UPS tracking number for it though. It may actually be on your door step today. You'll have an email with the tracking info shortly.

raazin- it is a v7 sti 2.0L. Forge internals, large crank, large forged connecting rods, etc. Let me know if you have further Q's on it, it is currently crated and ready to ship to a new home ;)

wouldnt happen to have a v7 spec c around would you?

might have one in a few weeks. It's currently purring under our wagon's hood. Runs perfect.

im looking for one so if you get one in please pm me;)

raazin- it is a v7 sti 2.0L. Forge internals, large crank, large forged connecting rods, etc. Let me know if you have further Q's on it, it is currently crated and ready to ship to a new home ;) [/B][/QUOTE] do you know how much miles are on the short block.

roughly 19K-20K miles. Fairly low. The cross hatches are very viewable and build up on valve train (when removed) was minimal.

East Coast Scooby - received the downpipe 2 days ago (06/02), thanks :)

Shuji

Thanks for the quick shippment on the throttle body, ordered it Saturday afternoon, got it Monday afternoon.

Too bad that this wasn't my problem and car still not running right. :(

http://forums.nasioc.com/forums/showthread.php?s=&threadid=569440

fatray- sorry to hear it did not solve your issues. I responded to your post with some ideas as well.

How much for the jdm sti intercooler???

we'll have some scratch and dent TMICs at blow out prices this next weekend (june 12/13). $3XX range looks like. Bent fins are pretty much why they are discounted. Pictures will follow as well.

Stephen
www.IAPERFORMANCE.com
Subaru Audio Upgrades, Click the Subaru
http://www.iaperformance.com/images/iasignature.gif (http://www.iaperformance.com)

I am also looking for a jdm Version 7 intercooler.

Let me know when you get them in.

Thank you!

If you would like updates regarding all new arrival JDM parts please email back with the subject line:

JDM New Arrival Mailer

An email will be sent out with links and info regarding all new items that we receive. To unsubscribe simply email us back and we'll remove your name from the mailers.

info@iaperformance.com

Stephen
www.IAPERFORMANCE.com
Subaru Audio Upgrades, Click the Subaru
http://www.iaperformance.com/images/iasignature.gif (http://www.iaperformance.com)

Still have the STI top mount for sale? if so how much shipped with the Y pipe and the vent lines.

wRxbeater11- TMICs will be ready to roll this next week (mid to end). Pricing will be available as well as pictures at that time.

Stephen
www.IAPERFORMANCE.com
Subaru Audio Upgrades, Click the Subaru
http://www.iaperformance.com/images/iasignature.gif (http://www.iaperformance.com)

East Coast Scooby - Do you guys have any STi RA Spec C TGV Housings in stock?

I'll have a set in about 5 days once I yank them off of the shop's wagon. Great shape and straight through design (no splitter). Please email for more details.

Stephen
www.iaperformance.com

emailed ya.

Will you be getting any VF30's or 34's anytime soon?

redobs-sure will. Used VF30s will be in stock shortly.

Do you have any transmissions??

kwyjibo- they just arrived as well. I'll be working away through the weekend to bring a comprehensive inventory list hopefully by Monday at the very latests. Suretrack, DCCD, 2003 is the info.

For the quickest response I would suggest dropping an email to join the mailer that should be sent out on Monday it looks like. info@iaperformance.com with "new arrivals" in the subject line.

Stephen
www.iaperformance.com

sign me up for the mailer.

mike@roadfly.com

Any word on when the Intercoolers are coming in?

The mass mailer is going out very shortly. It will have a few of the major items on there. Here are some teaser pictures until then:

http://www.iaperformance.com/specialsImages/full_DCP_3795.JPG

There are 5 ICs in stock as I type. Front and back photos will be given as well.

Yes, that is a complete v7 JDM sedan :D and a scattering of 6 speeds. More to come, shop is an utmost mess to say the least.

http://www.iaperformance.com/specialsImages/full_DCP_3810.JPG

Stephen
www.IAPERFORMANCE.com
Subaru Audio Upgrades, Click the Subaru
http://www.iaperformance.com/images/iasignature.gif (http://www.iaperformance.com)

yummmyyyy - got any smoking deals on a 6spd? ;)

Do the intercoolers include the bov and y-pipe?

Thanks

updated the pricing for Friday madness sale :)

Stephen
www.IAPERFORMANCE.com
Subaru Audio Upgrades, Click the Subaru
http://www.iaperformance.com/images/iasignature.gif (http://www.iaperformance.com)

Any word on those TGV housings?:)

you have an email :D

Stephen
www.IAPERFORMANCE.com

do you have any more V8 twinscroll setup kits in stock? also what exhausts will bolt up to the downpipe? i'm assuming that it has to be the JDM spec exhausts but i'm not too familiar with what's available.

thanks,
Sam

Sam- We have 1 left in stock. Comes complete with oil pan assembly and all. I'd suggest to drop it off with a trusted local exhaust shop which can make you the extension required. Most any shop should be able to accomplish this. hope this helps.

Stephen
www.IAPERFORMANCE.com

Originally posted by East Coast Scooby
Sam- We have 1 left in stock. Comes complete with oil pan assembly and all. I'd suggest to drop it off with a trusted local exhaust shop which can make you the extension required. Most any shop should be able to accomplish this. hope this helps.

Stephen
www.IAPERFORMANCE.com



Wanted to know how much do you guys sell those twin scroll setup fors ? :) Oh and emailed ya back mang:)

-Melo

Do you have another alternator by any chance??
Lemme know, I need one ASAP.

WRXbeater11- $1600 + ship on the twin scroll turbo setup. One left in stock.

Davenow- We sure do. http://www.iaperformance.com/specials.asp

Stephen
www.IAPERFORMANCE.com

Originally posted by East Coast Scooby
WRXbeater11- $1600 + ship on the twin scroll turbo setup. One left in stock.

Davenow- We sure do. http://www.iaperformance.com/specials.asp

Stephen
www.IAPERFORMANCE.com

Check your email buddy;)

you have a reply :D

Stephen
www.iaperformance.com

Originally posted by East Coast Scooby
you have a reply :D

Stephen
www.iaperformance.com

check again buster! :)

whoops, got the screen names mixed up. I still have yet to receive an email on the twin scroll from you. Probably still in internet transit.

Stephen
www.iaperformance.com

Originally posted by East Coast Scooby
whoops, got the screen names mixed up. I still have yet to receive an email on the twin scroll from you. Probably still in internet transit.

Stephen
www.iaperformance.com

nothing is mixed up, Just check once more ;)

just checked the email account, nothing as of yet. Can you resend via a PM?

stephen
www.iaperformance.com

I just PM'd you
I will take the alternator, but I need it ASAP, like overnighted if possible. I need to look at your site, I might snag something else while I am at it :lol:
Please call me if possible asap so we can do it up :)

Dave- YOu have a phone message. I can still get it out today. Just ring me back

Stephen
www.iaperformance.com

Originally posted by East Coast Scooby
Dave- YOu have a phone message. I can still get it out today. Just ring me back

Stephen
www.iaperformance.com

Stephen Did ya get those TGv housing and sti manifold out to me today?:D

-melo

sure did. I'll email over the tracking.

Stephen
www.iaperformance.com

Originally posted by East Coast Scooby
Dave- YOu have a phone message. I can still get it out today. Just ring me back

Stephen
www.iaperformance.com

Bah went out to dinner left phone at home:mad:
Tomorrow is another day :)

I just want to confirm, this will bolt and plug in to my 02wrx like stock right? I know it fits, but is the plug the same?
Also, what benefit is there to the JDM V8STI a/c compressor?
Smaller/lighter? Is it plug and play? If so I may have to do that too :)

BTW, If I can just order through the site thats fine too. I just need to get it to me as fast as possible, what are my shipping options on the site?

Davenow- direct plug and play. Fits and looks just like stock minus the part numbers.

The jdm v8 compressor has a different plug which only has one wire instead of 3 like the 02-04 wrx line up has. From time to time we do get in specialty JDM v7 compressors which are the same size as teh smaller v8 compressor, 5lb lighter, and have the exact same 3 wire plug as the WRX. In fact I just came across one today in inventory :D

Originally posted by East Coast Scooby
sure did. I'll email over the tracking.

Stephen
www.iaperformance.com

sweet man Ill be waiting for them thank ya sir!:D

Anymore JDM STI Intercoolers.Thanks:)

1 more week and we'll have more. Hopefully in better shape this time.

The BREMBOs we received this week are in far better shape than the others as well. Pricing will be going out to all on the emailer as well as posting in the wheel/tire/braking vendor forum.

Stephen
www.iaperformance.com

Originally posted by enewtabie
Anymore JDM STI Intercoolers.Thanks:)

any sti pink injectors laying around for a usdm wrx?

Are either of the VF30's still available????

Drooling for STi shortblock!

Leo- We take american express to help control the drooling process :D

cm1wrx- vf30 still available, $420 shipped

Honduhunter- few sets of PINKS laying around. Direct fit for your wrx. $290 shipped.

are they used??? do they come with all gaskets, o-rings, etc. ?????

Originally posted by East Coast Scooby
Honduhunter- few sets of PINKS laying around. Direct fit for your wrx. $290 shipped.

cool:D ill be giving you guys a call next week!

Pinks are used and do come with all O rings. Guaranteed to work.

Stephen
www.IAPERFORMANCE.com
Subaru Audio Upgrades, Click the Subaru
http://www.iaperformance.com/images/iasignature.gif (http://www.iaperformance.com)

Finally got my car running thanks to your coil packs. All this time of messing with everything but the coil packs. Thanks for super quick shipping.

i was looking at your website by any chance you still have the rear windshields with the wipers and harness for gds? im interested in them:banana:

any ver8 or ver7 intake manifolds (STi of course)
Drew

jermaine- we're currently out of the rear glass it looks like.

wrx8xb- I think we may have (1) v7 manifold in stock. I'll have to snap a shot of it this afternoon.

Stephen
www.iaperformance.com

stephen,

wondering if you have some Manual transmission starter bolts i could get from you, please let me know, i need these ASAP!!

thanks

Ben

Ben- sure do, drop me an email. I can mail them out today.

stephen
www.iaperformance.com

Have you shipped out my twin scroll kit yet?

My plug for Stephen and his brand of vendor service. He sells only what he has in hand, no vapor parts. His prices are very competitive. His service is impeccable.

When you need the good stuff, call Stephen.

Mike McBride

Items updated!!!

bistrosti- shipped it last Friday, tracking numbers to be found in your PM box :D Thank you for yoru busines.

MZM- thank you for the words. We can not sell what we don't have. Business ethics to live by :)

Stephen
www.iaperformance.com

is the ver7 intake manifild different than the usdm wrx? and if so what are those differences? thanks:D

difference is the bling bling red color :) here is another v7 manifold with a bit of degresser and water sprayed on it:

http://www.iaperformance.com/specialsImages/full_Copy%20of%20timing%20belt.JPG

Stephen:

Thanks again for the v8 steering pump - Great service and shipping turnaround :banana:

Way to go and keep up the great work !!

Leo.

Originally posted by East Coast Scooby
difference is the bling bling red color :) here is another v7 manifold with a bit of degresser and water sprayed on it:

http://www.iaperformance.com/specialsImages/full_Copy%20of%20timing%20belt.JPG

what kind of timing belt is it?

PE timing belt.

stephen
www.iaperformance.com

Stephen, check your email buddy:)

just called and ordered some pinks!!! thanks stephen!:D


:banana: :banana: :banana:

wRxbeater11- you have an email right back :D

Honduhunter- thank you for your business and I'll get these out to you today.

Stephen
www.IAPERFORMANCE.com
Subaru Audio Upgrades, Click the Subaru
http://www.iaperformance.com/images/iasignature.gif (http://www.iaperformance.com)

Originally posted by East Coast Scooby
wRxbeater11- you have an email right back :D

Honduhunter- thank you for your business and I'll get these out to you today.

Stephen
www.IAPERFORMANCE.com
Subaru Audio Upgrades, Click the Subaru
http://www.iaperformance.com/images/iasignature.gif (http://www.iaperformance.com)

might want to send again i didint get it...

it was concerning the STI IC and an WRX radiator

Definitely received it this time, you have mail :D

V7 heads added to the mix, as well as v7 fully forged semi closed short blocks

Stephen
www.IAPERFORMANCE.com
Subaru Audio Upgrades, Click the Subaru
http://www.iaperformance.com/images/iasignature.gif (http://www.iaperformance.com)

Originally posted by East Coast Scooby

Honduhunter- thank you for your business and I'll get these out to you today.
]


anytime!!
:D

Will that v7 up pipe fit on my '02 WRX sedan? Shielding included?

bluboy103- Correct, and the shielding even has subaru stamped on it like your stocker :D

Stephen
www.IAPERFORMANCE.com
Subaru Audio Upgrades, Click the Subaru
http://www.iaperformance.com/images/iasignature.gif (http://www.iaperformance.com)

Originally posted by East Coast Scooby
bluboy103- Correct, and the shielding even has subaru stamped on it like your stocker :D

Stephen
www.IAPERFORMANCE.com
Subaru Audio Upgrades, Click the Subaru
http://www.iaperformance.com/images/iasignature.gif (http://www.iaperformance.com)

check your mail I hit you back up dood:) ill pm you my message

[QUOTE]Originally posted by East Coast Scooby
[B] Honduhunter- thank you for your business and I'll get these out to you today.
QUOTE]

still waiting on a tracking number... do you have one? thanks stephen.:)

honduhunter-you have an email :D

Stephen
www.IAPERFORMANCE.com
Subaru Audio Upgrades, Click the Subaru
http://www.iaperformance.com/images/iasignature.gif (http://www.iaperformance.com)

Originally posted by East Coast Scooby
honduhunter-you have an email :D

Stephen


i havent got it.:(
maybe we had a miscommunication. here is my email again....

tjcleary@gmail.com:

when do you expect to have more twin scroll kits available?

How about gaskets?Originally posted by bluboy103
Will that v7 up pipe fit on my '02 WRX sedan? Shielding included?

Ok so I was looking at the third pin on that JDM alternator, and my buddy's 04 STI, has the thrid wire. We have figured out, its alternator shut off. Basically at some points the alternator is shut off so it freewheels, lowering parasitic loss on the motor.


I want this. I can have my UTEC kill it every time I go WOT.

Can you get me the plug off one of those STI motors? The Green one with THREE wires?
I would like the plug and as much of the wires as you can get me. 6 inches would be fine.

Can you do it?

davenow-I have a spare clip w/ wire piece here. Just pay shipping and it is yours :D

bluboy103- we have factory gaskets here that we can include for an added cost. I'll have pricing available come tuesday of this week.

Stephen
www.iaperformance.com

I missed something, how much were the full twin scroll setups going for? And when will you get your hands on a few more?

Thanks

-- Steve

we'll have one more kit around the 9th of this month. Pricing is $1600 + ship. Buy a few big ticket items and the prices will go down as well ;)

Stephen
www.iaperformance.com

forget my tracking number i got the injectors today!! thanks alot guys you are great. i cant wait to buy something else.

Originally posted by East Coast Scooby
we'll have one more kit around the 9th of this month. Pricing is $1600 + ship. Buy a few big ticket items and the prices will go down as well ;)

Stephen
www.iaperformance.com

big ticket items like INJECTORS?

also does the kit include all the necessary gaskets?

Sam

sam- if you pick up a set of injectors we'll take care of you ;) Pm or email for more details on pricing.

Comes with all gaskets, granted they are used. Options are wait for our shipment of new ones to arrive, or resuse and spray with RTV copper sealer. Both will work fine. The twin uppipe design is 100% different that the us cars and is not prone to leaking like the wrx ones are with reused gaskets.

Stephen
www.iaperformance.com

Side blinkers going on my little silver girl. Thanks Stephen!! You, as always, kick ass on service!! Whoops wrong thread. But still, thanks for the blinkers and here's a free bump, haha.

Richard

Hey any word on them STI IC this week? better get me the nicest one ;) :D :banana:

ICs are still in bound. 1 arrives today and 2 more next week.

I'll send out the mailer when they arrive.

Stephen
www.iaperformance.com

Originally posted by wRxbeater11
Hey any word on them STI IC this week? better get me the nicest one ;) :D :banana:

Do the complete motors come with the wiring harness?


Curt

The complete ones do, the budget blocks do not. $100 option for them. Some people want to reuse their stock wrx harness and jump the tgv pins for the avcs ones, hence the option :D

Stephen
www.iaperformance.com

This motor would be going into the ultimate sleeper....literally. VW Vanagon. Friend of mind wants to be able to get up hills better than the 90hp stock motor gets him there.

Curt

Will the V7 Intake Manifold bolt up/work on a 04 WRX?

yup, direct drop in. Only one it will not work on is the drive by wire cars.

Stephen
www.IAPERFORMANCE.com
Subaru Audio Upgrades, Click the Subaru
http://www.iaperformance.com/images/iasignature.gif (http://www.iaperformance.com)

Oh crap! This good news is NOT the answer my wallet was looking for. So much cool stuff, so little money. :( I need to think this one over, thanks for the answer. This one will be hard to hide from the wife so I have to consider this carefully. I think the old "I used Krylon's new red crinkle finish spray paint" will work, the secret money shifting is another issue....

unabomber- you crack me up. Hopefully you can sneak it by.

Stephen
www.IAPERFORMANCE.com
Subaru Audio Upgrades, Click the Subaru
http://www.iaperformance.com/images/iasignature.gif (http://www.iaperformance.com)

I just checked my finances. I am currently doing some serious sneaky ops to fund my H-6 brake upgrade. Though the good news is I am going to be fully funded for it, there is NO way I can fund another "black ops" project. :( I know that you get these things in from time to time, so I will get with you at a later date. So unless you want to sponser the sexiest wagon on the east coast with a free manifold, I will be contacting you down the road.

Ron

Ron- We'll have plenty for when another "black ops" is ready :D

stephen
www.iaperformance.com

Anything on JDM STI top mounts?

didnt see what price you we're offering those twin scroll setups for, whats the price on those with a VF36?(when available;) ) thanks!

Originally posted by Invisiguard
didnt see what price you we're offering those twin scroll setups for, whats the price on those with a VF36?(when available;) ) thanks!

i don't know the price for the kit with a vf36, but the vf37 kit is $1600 + shipping.

east coast-

That was the fastest I have ever received a part from any vendor!

thanks

Yea, Stephen is a good guy. I bought a V7 block off of him and when he took the heads off of it he didn't like how it looked so he sent me a V8 block instead. Well, he tried to send me one. UPS somehow lost the 125 pound package. Wasn't a problem though, Stephen made good and had a new block coming my way in no time.

I also bought V7 heads and some other stuff and he was quick to get all of it sent out and helped me with all of the questions I had.

Nick

all TMICs will be in on Tuesday of this next week. Just confirmed the delivery date with the shipper :D

3 in total, hopefully condition will be better this time around. Mailer will go out as soon as photos are taken.

Stephen
www.IAPERFORMANCE.com
Subaru Audio Upgrades, Click the Subaru
http://www.iaperformance.com/images/iasignature.gif (http://www.iaperformance.com)

Stephen, did you get my email?

I'll pre-pay for the next twin-scroll set up you think your going to get!
Are you expecting any on this next container?:
:)

invisiguard- please drop an email so we can touch base on twin scroll. I believe we have one left.

checking all other emails as I type, most all responses going out today.

Stephen
www.IAPERFORMANCE.com

i hope you didn't forget about my twin scroll kit

samowrx- You should see an email on it Monday or Tuesday once the assemblies arrive. Several inbound, but only one left after yours ;)

stephen
www.iaperformance.com

Hey Stephen,

How much for just the twin scroll header, up-pipe and gaskets?

Originally posted by East Coast Scooby
samowrx- You should see an email on it Monday or Tuesday once the assemblies arrive. Several inbound, but only one left after yours ;)

stephen
www.iaperformance.com

it feels like christmas in july :)

typer_126- sold as complete units unless we run across a customer willing to take just the turbo.

stephen
www.iaperformance.com

Still have any of those around ? Price still 270 ? how used . . . ect. ect. ?

WRX Rush

what kind of forged internals are they, on the version 7 block?

NEW SHIPMENT JUST ARRIVEDDismantling is occuring over the next few days with photos to be posted shortly. Email update will also be rolling out shortly.

wrx rush- injectors have roughly 25K to 30K miles on them. Guaranteed to work or your $$$ back. Price is $290 shipped. 1 set left in stock at this time.

Stephen
www.IAPERFORMANCE.com
Subaru Audio Upgrades, Click the Subaru
http://www.iaperformance.com/images/iasignature.gif (http://www.iaperformance.com)

Bump for a great deal.

I'll be calling in the morning for those brakes and probably a Ver.7 short block too.

-Dylan

PM me of for a price of the front passenger side door shipped to san diego. Is it in good conditoin(no dents)?

jay

Jay- assuming this would that be front right passenger door? The whole right hand drive thing confusses things a tad. Left and right seem to work best on our end. We don't want to send you the wrong side ;). Good condition, no dents. You require the glass too? We just snapped photos of all of them up close and will have them up later on today.

Dylan- sounds good to me.

stephen@iaperformance.com

Any word on the JDM ICs.

Jay- assuming this would that be front right passenger door? The whole right hand drive thing confusses things a tad. Left and right seem to work best on our end. We don't want to send you the wrong side ;). Good condition, no dents. You require the glass too? We just snapped photos of all of them up close and will have them up later on today.

Dylan- sounds good to me.

stephen@iaperformance.com

Yes the front right door aka US passenger or JDM drivers side. I hit a piece of road debris and it put a big hole in my door and somewhat bent the metal bar inside. Everything should swap over right(door card, glass, wiring etc)?

just posting so i won't lose this thread

illmatic-correct, everything should be a direct swap. Not sure if you require the glass or not, shipping will be quite a bit more if so (have to do freight). I'll double check the doors to ensure there are side impact beams as well.

No ICs in stock at this time :(

Stephen
www.iaperformance.com

East Coast Scooby,
You have email regarding the version 8 complete motor. :)
-Erik

just replied :D

Stephen

Got any STi up pipes that will fit on my '02 WRX sedan?

We will by this time next week. $175 + ship.

Stephen
www.IAPERFORMANCE.com
Subaru Audio Upgrades, Click the Subaru
http://www.iaperformance.com/images/iasignature.gif (http://www.iaperformance.com)

Argh..I need a IC..can you keep me in mind

More on the way :) Arrival of possibly late next week.

Stephen
www.IAPERFORMANCE.com
Subaru Audio Upgrades, Click the Subaru
http://www.iaperformance.com/images/iasignature.gif (http://www.iaperformance.com)

N/M :confused:

Received! :D

Thanks Stephen!

Hey Stephen, can you get V8 Spec C steering racks and crossmembers. Maybe the P/S pump too.

All for a USDM STi?

Thanks.

TreyS- We can try, but pretty hard to come by for those parts. Especially if you want LHD versions.

Stephen

DOH, I was thinking EDM (european).

If you get one in, LMK :)

Are any STi brembo kits still available? If so, is this a complete system (front and rear) with pads, rotors, and calipers? Anything else I'd need? Shippping to San Jose, CA 95123

Rich

Do you have any jdm v7 i/c splitters?

Also looking for STi i/c switch(manual) and 2 STi water spray nozzles.

Thanks for your help!

front brembo assemblies still available here:

http://forums.nasioc.com/forums/showthread.php?t=580022

We have 2 sets left in stock.

No I/C splitters as of yet, but you never know what sometimes pops up with our shipments.

Stephen
www.iaperformance.com

Are you getting more twin scrolls?

Bhawk- actually, today they are to arrive :) Price is $1650 for a full kit + shipping. Comes with every bell and whistle. WIll have them ready to ship on Monday.

Stephen
www.iaperformance.com