ok, heres the problem im facing...

i bought just regular 15 inch motegi mr7's...they should be here tomorrow, BUT after reading up on them, i found this out...

the motegi's offset is only 35 mm......now, i read that the stock subaru rims have the 55 mm offset....and it also said that if you go to low, you may get some dangerous rubbing.

i plan to use the basic tires i have on it now (the 205/60/r15)...can anyone tell me if these motegi's are going to give me grief tomorrow?:(

Yes. Get a wheel with the proper offset. It may cause rubbing and even if it didn't it will cause other longterm problems such as premature wearing out of your wheel bearings. I would recommend reading the excellent "sticky" at the top of the tire and wheel forum by North Ursalia about wheel offset.

Yes. Get a wheel with the proper offset.

See if you can swap them back for something with an offset of 48 or better...

45mm is the minimum offset for a '97 Outback Sport .... the OE wheel is a 15x6 ET45