STi 04 WRX/STi Pink Springs $350Out of stock.

STi Key $22
Blank key

STi Engine Mounts $100
Includes left and right mount

STi Transmission Mount $70

"i" Badge $20
Available in pink or blue

STi 565cc Injectors $400

IHI VF34 Turbo $675
Capable of 350+ hp, direct bolt on, ball bearing.

Walbro 255lph Fuel Pump $95

Package: IHI VF34 Turbo + STi 565cc Injectors + Walbro 255lph Fuel Pump $1150



Please call or e-mail to inquire about other STi products not listed above.

As always, Aerosim is open 7 days a week for installations, including weekday evenings and weekends. Please call or e-mail to schedule an appointment.


-Steve

Stephen.Ramm@aerosim-research.com
Milan.Rao@aerosim-research.com (Sales)

Aerosim Research Ltd.
1374 Logan Ave., Unit E
Costa Mesa, CA 92626
(714) 545-5679 tel./fax

Originally posted by Aerosim Research Ltd
STi V6 Type RS GearSet $1100

??? RS? Is this the same as the 5-Speed STI Type RA gearset i keep reading/hearing about?

Originally posted by Psydotek
??? RS? Is this the same as the 5-Speed STI Type RA gearset i keep reading/hearing about?

Oops, type RA :( I'll fix the typo above. :)

And yes, it is the 5-speed STi gear set you keep hearing/reading about. :)

Kym
kym.phan@aerosim-research.com

Well, just 26k more miles before i'll be ready for a gearset swap... :D

Originally posted by Psydotek
Well, just 26k more miles before i'll be ready for a gearset swap... :D

:lol:

Kym
kym.phan@aerosim-research.com

why oh why must you tempt me like this?!?! :(

Originally posted by Aerosim Research Ltd
STi 04 WRX/STi Pink Springs $350

Please call or e-mail to inquire about other STi products not listed above.

As always, Aerosim is open 7 days a week for installations, including weekday evenings and weekends. Please call or e-mail to schedule an appointment.


-Steve

Stephen.Ramm@aerosim-research.com
Kym.Phan@aerosim-research.com (Sales)

Aerosim Research Ltd.
1374 Logan Ave., Unit E
Costa Mesa, CA 92626
(714) 545-5679 tel./fax

ugh, i might need that RA gearset...

how much would teh total be of the I badge installed

Steve,

Do you guys carry or can get STi catless uppipes? if so how much? I think I read $100 to install right?

thanks

Do you have the gear set in stock?????????


If so, its sold!!!!!!!!!:banana:

Originally posted by sigma pi
how much would teh total be of the I badge installed

Uh, free installation... and free hug for sigma pi too :)

$21.55 with tax. :)

Originally posted by Jeff_DML

Do you guys carry or can get STi catless uppipes? if so how much? I think I read $100 to install right?

thanks

We can get the STi cat-less up-pipe. :) Gimme a call on Monday for some pricing.

The up-pipe installation is $200. You'll need at least the manifold to up-pipe gasket and the turbo inlet gasket.

Anyway, talk to you more on Monday about the installation. :)

Originally posted by TMRRALLY
Do you have the gear set in stock?????????

If so, its sold!!!!!!!!!:banana:

Call me Monday, Sean! I can work out better pricing for you. :)

Kym
714.545.5679 tel./fax
kym.phan@aerosim-research.com

How much what it cost for your guys to gut my catless sti up-pipe?? :confused: :confused:

Originally posted by ilara72
How much what it cost for your guys to gut my catless sti up-pipe?? :confused: :confused:

:lol: :lol:

Kym
kym.phan@aerosim-research.com

Originally posted by ilara72
How much what it cost for your guys to gut my catless sti up-pipe?? :confused: :confused:

don't do it man, I've already tried... :(

Originally posted by G-force
don't do it man, I've already tried... :(

:(

"Aerosim Research Ltd
Visiting NASIOC Timeout"

Deja Vu. So, like, what happened this time?

quote:
Originally posted by G-force
don't do it man, I've already tried...


:confused: :confused: :confused: :confused:

Originally posted by kochj23
"Aerosim Research Ltd
Visiting NASIOC Timeout"

Deja Vu. So, like, what happened this time?

I was afraid to ask...

Originally posted by kochj23
"Aerosim Research Ltd
Visiting NASIOC Timeout"

Deja Vu. So, like, what happened this time? :confused: :confused:

Originally posted by kochj23
"Aerosim Research Ltd
Visiting NASIOC Timeout"

Deja Vu. So, like, what happened this time?

I'm still not quite sure but I think it has to do with Kym posting as Aerosim (see above). She wasn't supposed to post as Aerosim for a few months after the Cobb Access Port pre-order fiasco and the time out that we got for that.

I hope I can this straightened out and please don't put me on time out for posting this.

-Steve

Stephen.Ramm@aerosim-research.com

pm'ed you.:)

Bump for a great vendor. I am stopping by next Thursday to get oil pressure, EGT and Boost gauges installed into a Defi pod that they had painted to match my dashboard. I am excited, my birthday present to myself. :)

Bump.

-Milan
milan.rao@aerosim-research.com

You're back!?! Welcome back from your little vacation in Time Out Land.

SWEET@!!
now i can finally do business with you guys!

do you guys stock axxis ultimates? for the 4pots and wrx stock rears?
I think that i also need to replace my rotors front and rear, do you guys carry the stoptech OEM replacement rotors?

lemme know.
:)

Originally posted by kochj23
You're back!?! Welcome back from your little vacation in Time Out Land.

Thanks! :)

Originally posted by Onederer
SWEET@!!
now i can finally do business with you guys!

do you guys stock axxis ultimates? for the 4pots and wrx stock rears?
I think that i also need to replace my rotors front and rear, do you guys carry the stoptech OEM replacement rotors?

lemme know.
:)

Cool deal, Carlos. I'll see what we can do for you. :)

-Milan
milan.rao@aerosim-research.com

Originally posted by Onederer

do you guys stock axxis ultimates?


Axxis? You like ze dust powder, yes?
http://www.hubich.com/swst_bild.jpg

Originally posted by Coati
Axxis? You like ze dust powder, yes?
http://www.hubich.com/swst_bild.jpg

:lol: Yeah, they dust like crazy, but the trade-off in grip (even at lower temps) is worth it.

Does the RA gear set include the speedometer gear adaptor thing that keeps the ECU from going into limp mode?

Originally posted by Arnie
Does the RA gear set include the speedometer gear adaptor thing that keeps the ECU from going into limp mode?

I removed it from the original posting as we don't have one in right now, but I'll get you all the info once we get another one in.

Originally posted by Onederer
SWEET@!!
now i can finally do business with you guys!

do you guys stock axxis ultimates? for the 4pots and wrx stock rears?
I think that i also need to replace my rotors front and rear, do you guys carry the stoptech OEM replacement rotors?

lemme know.
:)

You've got PM. :)

-Milan
milan.rao@aerosim-research.com

Any GrpN top mounts for GC? Also, how much for a strut/spring/top mount install? Thanks.

Originally posted by GC8-E36
Any GrpN top mounts for GC? Also, how much for a strut/spring/top mount install? Thanks.

PM'd you.

-Milan
milan.rao@aerosim-research.com

Had my Oil Pressure/EGT/Boost gauges installed in a Defi pod on Thursday. Steve did a great job once again. He even fixed some seriously shoddy wiring that Al & Ed's did.

How much for a Stromung Dual Tip cat-back installed (wrx)?

Can I get a quote for a boost and egt gauge install? thanks!

Originally posted by kochj23
Had my Oil Pressure/EGT/Boost gauges installed in a Defi pod on Thursday. Steve did a great job once again. He even fixed some seriously shoddy wiring that Al & Ed's did.

How much for a Stromung Dual Tip cat-back installed (wrx)?

Originally posted by lowridinWRX
Can I get a quote for a boost and egt gauge install? thanks!


PM'd you guys. :cool:

-Milan
milan.rao@aerosim-research.com

Hey Milan, can you guys get Defi-link BF gauges? If so, how much for gauges and install? egt, oil pressure, boost, control unit II, and 3x pod?

Thanks

thanks for the info and order on the brake stuff.

ihearthmilan!

I also wanna make sure that everything is buttoned up underneath the car. it's been making some funny noises from time to time. maybe just make sure that everything is up to spec.

man, defi gauges are the hot item right now!

Originally posted by i eat meat
Hey Milan, can you guys get Defi-link BF gauges? If so, how much for gauges and install? egt, oil pressure, boost, control unit II, and 3x pod?

Thanks

PM'd ya, Pico. :cool:

Originally posted by Onederer
thanks for the info and order on the brake stuff.

ihearthmilan!

I also wanna make sure that everything is buttoned up underneath the car. it's been making some funny noises from time to time. maybe just make sure that everything is up to spec.

No problemo, Carlitos-buey. You also have PM. :)


Originally posted by Naylor
man, defi gauges are the hot item right now!

HHHOT item, indeed! :D Ryan, your car's going to be a freakin' monstAr! :eek:

yeah, i'm getting really anxious, not as anxious as the wife, but anxious....:lol: every other day, "what is taking so long for your car!" try explaining an sti swap to a women who barely rememebers to put gas in the car! :D

Originally posted by Naylor
yeah, i'm getting really anxious, not as anxious as the wife, but anxious....:lol: every other day, "what is taking so long for your car!" try explaining an sti swap to a women who barely rememebers to put gas in the car! :D

:lol:

Is anyone at the shop yet today? :D

I tried to PM you today, but your box was full.

-Marc

Give Milan a bit of time to catch up with everyone, and he will get back to everyone :D

Originally posted by mordy_2v
Is anyone at the shop yet today? :D

We're generally in after 1pm or so.

Originally posted by GC8-E36
I tried to PM you today, but your box was full.

-Marc

Sorry 'bout that, PM'd ya.

Originally posted by casualsurfer
Give Milan a bit of time to catch up with everyone, and he will get back to everyone :D

Thanks...it looks like all those STi AccessPORT inquiries clogged up the ole inbox. :D

-Milan

brakes good ...thanks guys!

been calling over the weekend after 1 and still haven't talked to anyone, and i sent 2 pm's. can i get an e-mail at thatsideofme05@hotmail.com about some gc0-10s?

Originally posted by that side of me
been calling over the weekend after 1 and still haven't talked to anyone, and i sent 2 pm's. can i get an e-mail at thatsideofme05@hotmail.com about some gc0-10s?

e-mailed and PM'd ya.

-Milan


Originally posted by Onederer
brakes good ...thanks guys!

No problemo, Carlitos!

-Milan :cool:

Can you guys get sti floor mats, mine didn't come with any :(

Originally posted by xtian67
Can you guys get sti floor mats, mine didn't come with any :(




<=== :eek: !!! you got it bro! :D congrats!

blue I badge still available?

Sorry it's taken a couple of days,

You know, I'm pretty sure we can get floor mats, never had anyone ask. :-) I'll check

No, we don't have any blue I badges left. :( Right now all we have are Pink ones.

-Ric
Aerosim Research Ltd.
Ric.Seaver@aerosim-research.com
714.545.5679

Originally posted by Aerosim Research Ltd


"i" Badge $20
Available in pink or blue

-Steve

Stephen.Ramm@aerosim-research.com
Milan.Rao@aerosim-research.com (Sales)

Aerosim Research Ltd.
1374 Logan Ave., Unit E
Costa Mesa, CA 92626
(714) 545-5679 tel./fax


why did i pay 25$ for that
:huh:

gaijin discount?

must be :lol:

:lol:

no responce not a good sighn :lol:

noob discount.

That's the cost of wear and tear you put on our couch. Sorry buddy. :-)

I talked to someone on July2nd they were going to get right back to me. Can you guys call me back I've been left three messages over the last two weeks trying to get a quote for T/I/FP/FMIC/CAI install. My number is in your computer.

Damian Craig

I talked to someone on July2nd they were going to get right back to me. Can you guys call me back I've been left three messages over the last two weeks trying to get a quote for T/I/FP/FMIC/CAI install. My number is in your computer.

Damian Craig

Hey Damian I've been trying to get ahold of you for several days, I left you a message on I think it was your cell phone. Give me a call on my Cell, I'll PM the # to you. Thanks bud,
-Ric
Aerosim Research Ltd.
Ric.Seaver@aerosim-research.com
714.545.5679

Check your PM's please.

Originally posted by Aerosim Research Ltd
That's the cost of wear and tear you put on our couch. Sorry buddy. :-)

:lol:

YGPM.

poor couch.

Closed ...

-Steve

Stephen.Ramm@aerosim-research.com