GP MOTO - Turbo Inlet Hose $210 *Free Shipping* Installed for $60.00 more
http://www.aerosim-research.com/images/NASIOC/GPMoto/GPmoto_intake_blue.jpg

PERRIN - Intercooler Hose kit $149.99 *Free Shipping* Installed for $25.00 more
http://www.aerosim-research.com/images/NASIOC/Perrin/IC_hose_kit.jpg

PERRIN - WRX Rear Endlink Kit $139.99 *Free Shipping* Installed for $25.00 more
http://www.aerosim-research.com/images/NASIOC/Perrin/Perrin_Rear_Sway_Bar.JPG

PERRIN - Universal Gauge Pod $149.99 *Free Shipping*
http://www.aerosim-research.com/images/NASIOC/Perrin/perrin_gauge_pod.jpeg

PERRIN - Sti rear Sway / WRX Rear Sway BAr $199.99 Installed for $45.00 more

CARBOTECH - Slotted Rotors $89.00 each
CARBOTECH - 721 Bobcat Brake Pads $99.00
http://www.aerosim-research.com/images/NASIOC/Carbotech/rotor_pad.jpg

PDE - Downpipe Catless $399.00
http://www.aerosim-research.com/images/NASIOC/PDE/catless_dp.jpg

PDE - Flex Up-Pipe $279
http://www.aerosim-research.com/images/NASIOC/PDE/flex_up-pipe_01.jpg

Up-Pipe and Downpipe Installed for $210.00 more

COBB - ACCESS PORTS!! '02/'03 & '04 IN STOCK! $595 +Shipping
COBB - FXT Access Port $645.00+Shipping
http://www.aerosim-research.com/images/NASIOC/Cobb_Tuning/aport2.jpg

COBB - N/A Headers Catted and Coated (shown) $949.00+Shipping
COBB - N/A Headers Catted and Uncoated $749.00+Shipping
http://www.aerosim-research.com/images/NASIOC/Cobb_Tuning/na-header.jpg

CUSCO - Front Strut Bar $165.00 Installed for $25.00 more

PROGRESS - WRX Rear Sway Bar $175.00 Installed for $45.00 more

PRODRIVE - 04 WRX Springs $299.00 *Free Shipping* Installed for $150.00 more
PRODRIVE - 04 STi Springs $329.00 *Free Shipping* Installed for $200.00 more
PRODRIVE - Front Lip Spoiler $299.00


Jobe (Emily :) )
Aerosim Research Ltd
714.545.5679

Stephen.Ramm@aerosim-research.com

shouldn't this be in the SCIC Vendor Classifieds???

i'm almost possitive thats the most n00bish vendor post eVAR!....I'LL MOVE IT. :)

Sorry, i am new :(

Jobe

Sorry, i am new :(

Jobe
Yes, that you are. :)
[not even the obligatory e-mail address at the end of the posts...] :D

I'm guessing these are the "shipped" prices.

Curious, didn't see it listed, but do you have a price for a progress front anti-roll bar for an '03 WRX [cost & installation], and what's the cost for an uppipe install [if i bring my own]?

It's ok Jobe. These guys are being nice too, hehe.

Can you put me down for a blue GP MOTO - Turbo Inlet Hose. Can you let Steve know I need to get some rack time in there this next week to put on the studs and bracketry. Thanks.

Dinh

shipped prices on the things that say *free shipping* which is most of the stuff

And Dinh, i'll let steve know right now

Jobe.

NEXT TIME I WILL NOT BE SO NICE :D


Dale Teague (Boxer4Racing)

http://home.att.net/~teaguesauto/Logos/boxlogo1.jpg

ha ha.. awww.

ha ha... awww.

poor jobe, nothing is going well with your first post

Still pwn3d i say... :) [well, to a minor degree anyways]

[you'll get the hang of it eventually] :D

what happened to the killer pricing aerosim once offered? perrin wrx endlinks are $115 shipped and progress bars are $150 shipped elsewhere...im willing to pay $5 or even 10 extra to support you guys but a $25 difference is killer and dont forget about tax

I'm sorry Dale, poor Jobe is new. She didn't know where else to get the images and yours were SO good she just couldn't help but use them. :-) It won't happen again.
-Ric

NEXT TIME I WILL NOT BE SO NICE :D


Dale Teague (Boxer4Racing)

http://home.att.net/~teaguesauto/Logos/boxlogo1.jpg

Are you interested in them? Would you like us to work out a better deal for you? There are plenty of Vendors who will undercut prices to the point where no one makes any money. To some people that doesn't matter, but some of us can't make a living not making money.
-Ric
what happened to the killer pricing aerosim once offered? perrin wrx endlinks are $115 shipped and progress bars are $150 shipped elsewhere...im willing to pay $5 or even 10 extra to support you guys but a $25 difference is killer and dont forget about tax

hey you guys be nice to jobe... she's really sweet you guys are just being mean...

Yes, Emily is the nicest person in the Universe. You guys are gonna hurt her feelings.

and she's pretty cute too

OMG the leg humpers come out

haha...just a comment. met her yesterday.

what happened to the killer pricing aerosim once offered? perrin wrx endlinks are $115 shipped and progress bars are $150 shipped elsewhere...im willing to pay $5 or even 10 extra to support you guys but a $25 difference is killer and dont forget about tax

Our prices haven't changed, it's just that there are a bunch of vendors out there who don't care if they make any money. If I sold Progress bars shipped at $150 I'd be making $5 if I was lucky. If I factor in the time it takes me to drive to Anaheim and pick them up and my gas, I lose money. Same deal with the endlinks. The profit margins aren't nearly what you guys seem to think they are. We make very little on sales alone. Most of the money I make is on installs.

Maybe if my parents were supporting my shop I'd be able to sell at a loss so I could be cool and hook up my "friends", but I'm actually trying to make a living on this. Sorry for the sour grapes but it takes nearly $20,000 in gross sales a month just to pay the bills here and that doesn't include any cash for me.

-Steve

Stephen.Ramm@aerosim-research.com

It's all good steve I support Aerosim... Steve is the most down to earth shop owner I know... Most people just does what they have to do (some don't do a very good job at that) and get you out of there as fast as they can... But at Aerosim Steve makes you feel like you're at home welcomes you in and chit chats with you while HE does the labor and he will explain what he is doing and answers all your questions... 2 thumbs up for Aerosim.

OMG the leg humpers come out


http://www.jaron95.com/smilies/3some.gif

yeah kingston you perv. :p

I keed i keed

Everyone is talking about how cute she is. I really need to visit Aerosim to go see her. LOL :) I don't think she stays late tho.....

Anyways, Steve hook me up with a price of Greddy EGT 60mm w/ Greddy gauge stand isntalled. BTW I'm looking for black face. :)

My payday is coming up.

PM me Steve.

jah, she really just has a great personality tho. Fun to hang out with.

Everyone is talking about how cute she is. I really need to visit Aerosim to go see her. LOL :) I don't think she stays late tho.....

Anyways, Steve hook me up with a price of Greddy EGT 60mm w/ Greddy gauge stand isntalled. BTW I'm looking for black face. :)

My payday is coming up.

PM me Steve.

Awww ... she works 1-7 m/w/f if you want to meet her, but she won't be in tomorrow.

I'll get you a price on the EGT installed tomorrow. Did you find a place to fix your lip? I feel really bad about that. I've been asking around but haven't been able to find any place that can fix it.

It's all good steve I support Aerosim... Steve is the most down to earth shop owner I know... Most people just does what they have to do (some don't do a very good job at that) and get you out of there as fast as they can... But at Aerosim Steve makes you feel like you're at home welcomes you in and chit chats with you while HE does the labor and he will explain what he is doing and answers all your questions... 2 thumbs up for Aerosim.

Thanks, I really appreciate the support. I try to give everyone a decent deal and still earn a living. It's definitely not the easiest way to make a living but at least I'm my own boss and I can sleep late. Of course, if you buy something from me and I install it, I can always make the deal sweeter.

-Steve

Stephen.Ramm@aerosim-research.com

Haha, the leghumpers. This is funny Steve. Poor Jobe. Hey man, is your rack free yet. The puddle in my driveway is getting bigger.;)

BTW, get some sleep man.

Hey Steve...

I decided not to fix the lip. It costs too much and I'm too lazy.

Just gonna get another lip. :) I'll talk to you on that.

Anyways, i'll come by with some Pocky.

Haha, the leghumpers. This is funny Steve. Poor Jobe. Hey man, is your rack free yet. The puddle in my driveway is getting bigger.;)

BTW, get some sleep man.

Yeah, gotta stop answering e-mails and posts late at night, it's making it hard to get to the shop before 4pm. There's a car with a dead tranny on the lift right now and I've gotta move it out so I can get Ryan's car on there and pop in the motor. Let me see how much I can get done tomorrow and maybe Sunday will work.

Hey Steve...

I decided not to fix the lip. It costs too much and I'm too lazy.
Just gonna get another lip. I'll talk to you on that.
Anyways, i'll come by with some Pocky.

Damn, that sucks. Definitely feel free to stop on by with some pocky.

-Steve

Stephen.Ramm@aerosim-research.com

Steve, the stuff we installed today was amazing! 1/4 mile time is now less than 10 seconds.




j/k :lol:

But the car drives like it's supposed to drive now, IMO, and though I know I won't be satisifed with the power for long, I'll enjoy it while I can :D

Grace says hi!

catch can next...remember that moisture in the lines? Does the horn make you go faster too?

More stuff added and pics (on our server ... doh :huh:).

-Steve
(714) 545-5679 (from 1pm until I fall asleep)

Stephen.Ramm@aerosim-research.com

catch can next...remember that moisture in the lines? Does the horn make you go faster too?
Catch can? I don't need no catch can...

The horn's mounting direction gives me extra braking power when it blows, :lol:

Any STi intercoolers in stock? ;)

bump, for that great pizza the other day.

Any STi intercoolers in stock? ;)

bump, for that great pizza the other day.

Hahahah ... are you and Jobe coming by tomorrow??? :D

-Steve

Stephen.Ramm@aerosim-research.com

i'm coming by today....:D

Wanna put that downpipe in today Steve-O?

MMMMMMMMMmmmmmmm ....... Pocky........ mmmmmmmMMMMMM

if by tomorrow you mean monday, then yes, i'll prolly swing by...

and i did!

Wanna put that downpipe in today Steve-O?

Doh ... checked the thread too late. Today was mad driving picking up parts and more resin. Tomorrow night's cool. I'm booked the rest of the week on a tranny replacement and a bunch of installs on an STi.

-Steve

Stephen.Ramm@aerosim-research.com

after kung fu? How long you think that will take? Maybe next week or over the weekend if it's too rushed. I got a video i need to edit by Thursday -=)

hey steve, are there any more 04' WRX accessports in stock?

Thanks

Sent you a PM ... should be getting more this week.

-Steve

Stephen.Ramm@aerosim-research.com

Why the $50.00 price difference in WRX vs STi spring installation? It's the same labor.

Why the $50.00 price difference in WRX vs STi spring installation? It's the same labor.

No it's not. On the STi you have to disassemble the front struts to install the new bumpstops (because it is an inverted design).

Ah, true, I forgot about the disassembly for the internal bump stops. What's that? Probably 0.5 hrs? Anyhoo I stand corrected. Thanks for the clarification. At least you know it'll be done right, with care.

At least you know it'll be done right, with care.

If you've ever seen Steve work, you know how true that is. He's very meticulous and IMO is way over-qualified, but it's always a job done right.

If you've ever seen Steve work, you know how true that is. He's very meticulous and IMO is way over-qualified, but it's always a job done right.

Aww shucks ....

There's another reason for the $50 difference. The WRX springs go on without need for a spring compressor so I can just lean on them and tighten the nut. The front STi springs won't go on without compressing them and it ends up taking at least 1/2 hour more because of that. I hate spring compressors.

-Steve

Stephen.Ramm@aerosim-research.com
(714) 545-5679 (please call after 1pm)

Although Steve doesn't like spring compressors, he loves POCKY!!!

LOL

steve loves pocky with a C.

pockyc?! :confused:

*napoleon dynamite*

GOSH!

did you get those steering rack bushings in yet steve-o??? Me want!

did you get those steering rack bushings in yet steve-o??? Me want!

Yup, just got a box of 'em in this week.

-Steve

Stephen.Ramm@aerosim-research.com

Hey Guys, is there away I can get the Whiteline ALK bushings for the subframe?

Thanks for the response!!

-Tom

edit - removed gory details

Hey Guys, is there away I can get the Whiteline ALK bushings for the subframe?

I bought and installed used STi Aluminum control arms w/ALK already attached but I need those bushings to put my subframe back on... yeah I know there's that debate, but I drive w/my kids in the car a lot, so safety is a must.

PM or email terronez @ hotmail.

Thanks,

-Tom

Sent you a PM.

-Steve

Hey guys... what size gauges does that Perrin gauge pod fit?

Do you have carry any gauges that'd match the STi?

Sergi

Hey guys... what size gauges does that Perrin gauge pod fit?

Do you have carry any gauges that'd match the STi?

Sergi

The Perrin Pod fits both 52mm and 60mm gauges. The Defi Link BF series are the same as the STi, in fact Defi makes the STi gauges. Check out this LINK (http://www.defi-shop.com/product/bf/bf_top.html) to their website for some pics.

-Steve

Stephen.Ramm@aerosim-research.com

I have a downpipe and midpipe and need it to be installed. I also want to buy a PDE flex uppipe installed also. How much would this cost?

I have a downpipe and midpipe and need it to be installed. I also want to buy a PDE flex uppipe installed also. How much would this cost?

Sent you a PM.

-Steve

Stephen.Ramm@aerosim-research.com

What can a deal be with an 18g turbo fuel pump and injectors?

What can a deal be with an 18g turbo fuel pump and injectors?

Just install, or parts and install? I'll have to check on my prices for 18g's.

-Steve

Stephen.Ramm@aerosim-research.com

Steve,
Any update on the wide body kit...please email me thanks.

Steve,
Any update on the wide body kit...please email me thanks.

E-mailed you ... last night.

-Steve

parts and install on 18g

parts and install on 18g

Still trying to find a decent price on 18g's ...

-Steve

rotors in yet? :)

rotors in yet? :)

Yup, the rotors are in. Just waiting on your upper heater hose ... the one with the coolant temp sensor in it. It should be here by the beginning of next week, maybe sooner.

-Steve

Yup, the rotors are in. Just waiting on your upper heater hose ... the one with the coolant temp sensor in it. It should be here by the beginning of next week, maybe sooner.

-Steve
awesome thanks shoot me a pm when everythings in so i can man an appointment :D :disco:

Steve...

A bit off topic, but what would you charge to do a Koni insert install. I will have all the materials and do not need them physically installed onto my car...I just need the inserts installed into the strut housing.

Mike

Steve...

A bit off topic, but what would you charge to do a Koni insert install. I will have all the materials and do not need them physically installed onto my car...I just need the inserts installed into the strut housing.

Mike
Ohhh, good question... I'm considering this in the future. :)

parts are all in stock....