We have all these things in stock ready to be bought and installed....

Perrin:
Positive Steering Response System (ALK)
Turbo Inlet Hoses (red/black)
Big MAF Intake
Dual Gauge Pods
Manuel Boost Controller
Oil Catch Can
STi Rear End Link
Front End Link (STi or WRX)
WRX Rear End Link
IC Hose Kit (2 Blue, 1 Red)

Carbotech:
Front Slotted Rotor Sets
'02 - '04 Front and Rear Pads
2 STi Front and Rear Pads

Goodridge:
WRX/STi Stainless Lines

Intrax:
Camber Bolt Sets

GPMoto:
Turbo Inlet Hose (Blue)

Borla:
Hushbacks

Cobb:
Coated N/A Header
Uncoated N/A Header
'04 WRX AccessPort
'04 Forester XT AccessPort
WRX/STi Catless Downpipe
WRX/STi Catback

Whiteline:
RS and WRX Steering Rack Bushings

Exedy:
RS Clutch
WRX Clutch

C&R:
High Perf. Radiator w/fans, etc.

Prodrive:
'02-'03 Front Lips
'04 WRX Springs

Greddy:
'04 Front Lips

Progress:
STi Adj. Rear Bars
WRX/STi Front Bar

STi:
Motor/Trans Mount Sets

Kartboy:
STi Short Shifter
STi Shifter Bushing
FXT Short Shifter
WRX Short Shifter
GC8 Short Shifter
WRX/GC8/FXT Shifter Bushing
Long and Short Exh. Hangers

Misc:
VF34/STi Injector/Walbro Kits $1600 installed
Revlab WRX Quick Rack (12.5:1) ($1200 shipped, $1300 install special)

We have all these things in stock ready to be bought and installed....

Perrin:
...
Retarded Dual Gauge Pods
:huh:

Hi Steve!

Ttiwwop!

Do the VF34s come with 1yr-12,000k warranty?

drew

:huh:

Hi Steve!

Hey Charlie. How's the new job and "three's company" style living?

-Steve

Do the VF34s come with 1yr-12,000k warranty?

drew

The two that are in stock are grey market, but identical except for the warranty. I can get US warranty VF34's for $50 more in kit form.

-Steve

Stephen.Ramm@aerosim-research.com

Hey Charlie. How's the new job and "three's company" style living?

-SteveThe new job is good. I move into the new place in a couple weeks... I'll know more then. :)

I might come by sometime soon and chat about seat rails...

-Charlie

how much for front pads for an 02 wrx?

hey steve.. or chris.. do the sti short shifter fit wrx wagon 5 speed? how much is that with bushing?

for the cobb exhausts, are these supposed to be the redesigned ones(if so, do you have pics)? also, do you sell cobb swaybars?
thanks :)
paul

how much for front and rear endlinks for wrx shipped to 91020?

how much do you charge for exhaust installation?

How much for the stainless brake lines and steering rack installed?

hey steve.. or chris.. do the sti short shifter fit wrx wagon 5 speed? how much is that with bushing?

What's up? Which short throw? the kartboy or the Subaru short throw? if it's the kartboy then you will need the WRX one.. But if it's the STi 5speed short throw it will fit and it also comes with all the shift linkage. I'll find out the prices for you and I'll pm them to you tonight...

Chris

brazymstrp - What kind of pads? Stock/carbotech?

heavyDOODIE - I'll check if that is the new redesigned ones... And yes we do sell COBB swaybars... Let me know if you need both front and back.

rawrFerny - I'll find out the prices for you and PM you tonight.

hey1 - I'll give you a pm about the exhaust install...

zinc99 - I know that the steering rack bushings are 90 installed I'll see how much more the brake lines will be... Maybe we can work something out if you are getting the lines from us.

bump for cool parts

thanks chris!

Hey, Im looking to get my clutch done, i heard you guys can do the install as well. I wanna get the exedy clutch for a 2000 RS, and i wanted to possibly get a kartboy short shifter+bushings for the same. What kinda price can ya offer me? :D

Steve, when will you get parts for the Legacy?

Sorry guys wasn't able to pm you guys with prices.... Was too tired last night and had a migrane.... I will try to respond to everyone tonight or tomorrow. I have to double check with steve on the prices...

And what legacy parts are you looking for? we can get any part you want all we have to do is order them....

Chris

Chris- sway bars, end links, strut braces for '05 legacy wagon automatic

how much you you charge for 02 WRX clutch job?? complete OEm stuff

how much you you charge for 02 WRX clutch job?? complete OEm stuff
why would you go with OEM stuff - Steve's got the GOODS to handle all kinds of power upgrades :D

Steve, you got my Cobb front sway bar there? :D

i just want to get rid of my damn 02 clutch shudder!! so whatever is gonna do the job, im there!!

please get back to me, PM or here. :disco:

How much for Carbotech bobcats and kartboy shifter bushings for a 04 WRX? Thanks.

hey guys check your pm's tomorrow at like 930 i'll pm you guys about all the prices and answer everyones questions I haven't been in at the shop all weekend... So I don't have any of the prices or anything... Sorry for the delay... I've been really busy and tryin to not get sick...

Chris

Do you have progress rear swaybar for wrx and price?

waiting... hehe..

progress rear sway bars are in for WRX and I'll pm you the price...

How much for the red IC hose kit? for 2002 wrx

which ic hoses?

how much for the STi short shifter and bushings?

what is your walbro kit consist of?

[QUOTEAnd what legacy parts are you looking for? we can get any part you want all we have to do is order them....

Chris[/QUOTE]

sway bars and end links for the front and rear

And what legacy parts are you looking for? we can get any part you want all we have to do is order them....

Chris
05 legacy gt shift knob??

props for installing a few of my components. bump for parts

would you guys sell the walbro / injector without the turbo? and if so how much?

Do you still have 04 WRX Access Ports available? If so I'd like to pick one up today. Also how much to have steel braided lines installed? Do you stock the Cobb short shifter?

sorry been busy guys I'll be sure to answer your pm's as soon as I can catch a breath.... Once again sorry for the delays...

Chris

I would like to order some steering rack bushings.
p.s. what is the best drop in airfilter?

how much for short shifter Installed?? 02 wrx

Price on Goodridge brake lines (F&R) for 03 wrx sedan and price for them seperately. Thanks.

Price on Goodridge brake lines (F&R) for 03 wrx sedan and price for them seperately. Thanks.

120 for brake lines and 135 to install them

how much for short shifter Installed?? 02 wrx
short shifter and bushing installed for 45

how much for kartboy exh. hangers? i need 3.

which ones you need the long ones or the short ones?

Chris - did you get any info regarding a Prodrive muffler for '05 Legacy?

i think the short ones...i dunno...what do i need to put on a scoobysport muffler?

120 for the lines and EXTRA 135 to install? or 135 for everything? :)

can u guys get the jdm sti pinks for 04/05 sti? how much and how much for install? there's two of us interested in doing this. thanks,
-naren.

alk installed?

i think the short ones...i dunno...what do i need to put on a scoobysport muffler?

The short ones will probably do the trick. The long ones are only necessary with huge pipes (3"+) that hit the rear crossmember.

-Steve

Stephen.Ramm@aerosim-research.com

120 for the lines and EXTRA 135 to install? or 135 for everything? :)

$120 for the lines and $135 extra to install. The install includes a complete brake fluid flush (we have Motul RBF600 in stock ... $14/pint and you need 2 pints for the flush).

-Steve

Stephen.Ramm@aerosim-research.com

Chris - did you get any info regarding a Prodrive muffler for '05 Legacy?

Just in case Chris hasn't replied ... the latest from Prodrive is that they don't expect it to be available for some time, but no idea when that will be.

-Steve

Stephen.Ramm@aerosim-research.com

can u guys get the jdm sti pinks for 04/05 sti? how much and how much for install? there's two of us interested in doing this. thanks,
-naren.

I'll have to check and see if they're still on backorder. The springs are $375 and install is $150 if you buy the springs from us. If you get them from another vendor, we charge $200 for install. If both or you want to do it at the same time, then I can knock $50 off each install.

-Steve

Stephen.Ramm@aerosim-research.com

alk installed?

Just installed? $60 for install. We have the Perrin PSRS in stock and can get the Whiteline ALK's as well.

-Steve

Stephen.Ramm@aerosim-research.com

Damn Steve, you still at the shop?

Damn Steve, you still at the shop?

Nah, just trying to get to sleep.

-Steve

Stephen.Ramm@aerosim-research.com

about how much will it cost to do a brake job/upgrade...w/ pads and ss lines..?? for all 4??

how much for borla hush?

about how much will it cost to do a brake job/upgrade...w/ pads and ss lines..?? for all 4??

Carbotech pads (fr and rr) $198.00
Stainless Lines $120.00
2 Pints of Motul RBF600 $28.00
Labor $135.00

Total $481.00 (everything's in stock)

-Steve

Stephen.Ramm@aerosim-research.com

how much for borla hush?

$485.00 ... $510.00 installed.

-Steve

Stephen.Ramm@aerosim-research.com

steve or chris, i need front and rear endlinks for MY04 wrx by friday. some good quality ones at a reasonable price please. let me know. thanks.

*john "coiloverkid" said to hook me up!

Damn by friday I'll see what I can do for... No promises tho... How's perrin front and rear? I'll find out tomorrow....s

we still have 02-03 prodrive lips and 04+ Greddy lips for sale and also we have borla hush dual tip exhausts in stock... Call for xmas pricing...

yea perrin front and rear is fine. please make sure it's the newer sets cause i know they were having bearing issues with the previous endlinks. yea sorry for the short notice. i have my rear sway bar and i plan to install them all this friday.

okay i'll see if we can have them in....

so how's it looking on those endlinks guys? and how much?

well I ordered them but unfortunately they won't be here til tuesday wednesday.... we have the rear but we don't have the front. Let me know if that's cool with you....

yea if you have the rear in stock now that's cool. the rear is more crucial right now because i have the rear sway already. umm now what time can i pick up the rear endlinks? are they perrin's? and can you PM me the price? sorry for rushing you guys but i plan to install it by this afternoon. thanks.

how much to install helix up-pipe/dp?

Hi Steve,

Thanks for the email reply regarding the performance package install.
How much for the springs and install? I also wanted to pick your brain about doing that before I get the new wheels I want.

should I get them at the same time?

any difference between 17X7 or 17.7.5? vs 17X8 or 18X8 in your opinion?

anyone?

thanks!
Norm

i recently broke one of my rsb mounts. I currently have a helix rsb and endlinks, and i didnt want to replace the mounts with the weak oem ones. Do u guys carry any upgraded mounts? if so how much?

how much to install helix up-pipe/dp?

pm'ed you.

-Steve

Stephen.Ramm@aerosim-research.com

Hi Steve,

Thanks for the email reply regarding the performance package install.
How much for the springs and install? I also wanted to pick your brain about doing that before I get the new wheels I want.

should I get them at the same time?

any difference between 17X7 or 17.7.5? vs 17X8 or 18X8 in your opinion?

anyone?

thanks!
Norm

pm'ed you ... don't worry about getting them at the same time if your budget is tight, but I'd get it aligned a week or two after you get the springs installed.

-Steve

Stephen.Ramm@aerosim-research.com

i recently broke one of my rsb mounts. I currently have a helix rsb and endlinks, and i didnt want to replace the mounts with the weak oem ones. Do u guys carry any upgraded mounts? if so how much?

The only heavy duty mounts that we carry are with swaybar packages, so I don't have any available seperately. I do have some '04 mounts that stronger than the '02-'03 mounts. They have reinforcements on the sides and are generally beefier. The straps that hold the swaybar are also held by 2 bolts instead of one bolt and a tab, so those are stronger as well. You'd need both of those pieces as well as the bushings because they're slightly different as well. I think I have all of those parts (used) at the shop. I'll be back at the shop Tuesday if you'd like them.

-Steve

Stephen.Ramm@aerosim-research.com

Steve thanks for the perrin endlinks! What do you think about an alternator and lightweight pulley kit? will this affect the engine in the long run? and will it affect my electrical power? what do you recommend?

Hey Steve,

New at this site, I had no pm's.
should I just email you? Hope you had a nice Christmas.

Norm

Chris or Steve
did you get the Cobb braided brake lines in yet?
I need a set....
- Roland

pm sent regarding accessport

do you have the kartboy shortshifter withe the kartboy bushing in stock..if so how much for both out the door?

do you have the kartboy shortshifter withe the kartboy bushing in stock..if so how much for both out the door?

Yes, we do ... $175 tax inckuded out the door. That's for an STi, right?

-Steve

Stephen.Ramm@aerosim-research.com

Hey Steve, I just emailed you about some GC-8 parts.
I thought I'd drop a line here as well.
I'm looking for:

Exedy Street Clutch (Is that the Organic #15801?)
Exedy Racing Flywheel (Whatever is 12lb. plus, #FF02?)
Sti Motor Mounts
Sti Tranny Mounts


I may also be interested in a light weight pulley set.

Thanks, Korey
korey@edgstudio.com

Steve/Chris/Aerosim,

Can you guys get your hands on the Prodrive Up- and Down-Pipes since you're so close to the distribution center? I'm not interested in the Power Packages but just the up/down-pipes. If you can, how much would they be?

Thanks in advance,
Justin

Closing this thread to make way for a new one ...

We'll respond to the last couple of posts tonight.

Thanks,
-Steve

Stephen.Ramm@aerosim-research.com