PRECISIONTUNING


Transmission rebuilding onsite. RA Gearsets sold and installed.
http://www.precisiontuning.com/posts/ragearset.jpg


We will match any of our competitors prices on Exedy clutches and flywheels! :disco:

We can also supply the rebuilding parts for your Hypersingles and Twin Plates.

IM, PM, or call for the best prices.

The following is a list of available clutches.

The Following prices are installed. Im,pm or call for lowest shipped prices.

WRX:
Stock Replacement: 699.99 Installed
Exedy Stage 1 Organic: 799.99 Installed
Exedy Stage 2 Cerimetalic: 899.99 Installed
Add an Exedy lightweight flywheel for 379.00
Exedy Hypersingle:1549.99 Installed
Exedy Twin Plate: 1999.99 Installed

STI 6 Speed:
Exedy Stage 1 Organic 829.99 Installed
Exedy Stage 2 Cerimetalic: 829.99 Installed
Exedy Hypersingle: 1549.99 Installed
Exedy Twin Plate: 1999.99 Installed
Exedy Hypercarbon call Installed
Exedy Twin Carbon call Installed

R/S or N/A
Exedy Stage 1 Organic: 699 Installed
Exedy Lightweight Flywheel: 379
ACT Clutches also available.

Contact us for prices that just CAN'T be beaten. :disco:

STI Short Shifter with front and rear bushings: $178.88!!! or $300 INSTALLED!!!
http://www.precisiontuning.com/nonsense/stishifter.jpg

WRX Short Shifter with front and rear shifter bushings $135.00!!! or $260 INSTALLED!!!
http://www.precisiontuning.com/nonsense/wrxshifter.jpg
http://www.precisiontuning.com/nonsense/wrxshifterbushings.jpg


Precision Tuning
945 Cedar Bridge Ave
Brick, NJ 08723
732-451-0200
precisiontuning@comcast.net
aol Im: precisiontuning1
www.precisiontuning.com

All new website and shopping cart is up and running! :disco:

notice that parts are for the WRX and STI...was wondering if you had anything for the RS fellas out there...i have a toasted clutch and trying to find one asap...dont know if i should go stock or something aftermarket, thanks...i have no mods or anything and its a 2002 RS

Of course we do. You have a PM!

Rich

Ill be driving from ohio sometime in the spring for an exedy clutch and flywheel install . Ill make an apt closer to april/may, everyone seems to like you so Im gonna give you a try.

Ill be driving from ohio sometime in the spring for an exedy clutch and flywheel install . Ill make an apt closer to april/may, everyone seems to like you so Im gonna give you a try.

Thats quite a ride! We'll be here!!!

Thanks

Rich

Thats quite a ride! We'll be here!!!

Thanks

Rich


From your reviews It seems I cant go wrong. Ohio lacks very many reputable shops. Passen is in columbus, but is like 3.5 hours away, and expensive. I cant even get a response from a couple tuners in michigan. Mapquest says I can get to you in 6 and some change, they assume that I will follow the posted speed limit on Pa 80 east... suckers.

how much for a exedy stage 1 shipped to 99515 alaska?

thanks
mike

I need a clutchdisk for the hyper single. I have to ask, though. Is it feasible/practical/logical to have a fullface with the hyper single or do I need to stick with the six-puck that came with?

Anyhow, could you gimme a price shipped to 47401?

Thanks

WRX Exedy Stage 1 to 55044?
Do you include throwout bearing and clips?

Pm's to everyone!

Thanks

Rich

didnt answer about the t/o bearing

didnt answer about the t/o bearing
Sorry thought I did in the pm. My Mistake.

Stage 1's come with the following: Clutch Disc, Pressure Plate, Throwout/release bearing, Pilot Bearing and alignment tool.

Rich
:D

bump

Rich

:banana:

:disco: :banana:

Interested in a shipped price for a twin plate Exedy for an 04 STi???
AZ 85382

Hey guys....
E-mailed ya the other day about the clutch install and drilling a bung for my EGT gauge also.

How long these install prices good for??

Hey guys....
E-mailed ya the other day about the clutch install and drilling a bung for my EGT gauge also.

How long these install prices good for??

Till the end of the month.

Rich

What is it normally installed??

What is it normally installed??
Normally you would be in the 800 dollar range for the WRX Stage 1 and install.

Rich

Do you have anything for a 99 2.2 L ?

Nicole confirmed my appt. for this Sat @ 9:30am for the clutch install :D and some other little things. Could you tell me how much for:
1) tapping header for my EGT gauge. I already have the gauge and wiring routed.
2) Need you to loosen the dang rear O2 sensor for the mechanical fix.
PM me please...Thanks!!!

Uhh, PM'd you Precision...

Uhh, PM'd you Precision...

Answered.

Rich

What would you recommend for stock daily driver 98RS DOHC, What about price and shipping to Calgary, Alberta, Canada. T2Z 3Y8

What would you recommend for stock daily driver 98RS DOHC, What about price and shipping to Calgary, Alberta, Canada. T2Z 3Y8

Pm'd

Rich

How much for an Exedy organic stage 1 WRX clutch shipped to 30332?

How much for an Exedy organic stage 1 WRX clutch shipped to 30332?

You have PM.

Rich

Had my Exedy Clutch installed Saturday. Let me say...awesome group of guys!!! Great job, clutch feels great....Thanks PT!!!

Rich, took me 90min to get there and 4 hours to get home!!!! Darn snow storm followed me :lol:

Now lets hope I blow my motor soon and do that JDM V7 conversion :D

wow great prices too bad your not near nor cal more.

Had my Exedy Clutch installed Saturday. Let me say...awesome group of guys!!! Great job, clutch feels great....Thanks PT!!!

Rich, took me 90min to get there and 4 hours to get home!!!! Darn snow storm followed me :lol:

Now lets hope I blow my motor soon and do that JDM V7 conversion :D

Glad you like it, and glad you made it home safe. You dont have to blow the motor to drop a 207 in ya know. ;)

Rich

wow great prices too bad your not near nor cal more.

We can always ship you one.

Rich

speaking of shipping, just wondering if there is any shipping info on my clutch/flywheel for justins wrx in ohio? email....elemental01 at hotmail.com.

that and a shameless bump for a good company.

speaking of shipping, just wondering if there is any shipping info on my clutch/flywheel for justins wrx in ohio? email....elemental01 at hotmail.com.

that and a shameless bump for a good company.

Emailed. Should be at your door today. Sorry, I thought I had e-mailed it already.

Rich

exedy stage 1 shipped to 92887

I admit I was worried when this box showed up at my door.
http://oak.cats.ohiou.edu/~js101096/c1.jpg
but it was filled with this.

http://oak.cats.ohiou.edu/~js101096/c2.jpg

Rich and precision tuning Best vendors EVAH. Got my clutch and flywheel to me in one day.

exedy stage 1 shipped to 92887
You have PM.

Rich

I admit I was worried when this box showed up at my door.
http://oak.cats.ohiou.edu/~js101096/c1.jpg
but it was filled with this.

http://oak.cats.ohiou.edu/~js101096/c2.jpg

Rich and precision tuning Best vendors EVAH. Got my clutch and flywheel to me in one day.

Thanks for the kind words. We do the best we can.

Rich

hey can i get a price quote on a stage 1 clutch/flywheel combo shipped 21154 and for installed as well. 98 legacy 2.5L thanks!!

hey can i get a price quote on a stage 1 clutch/flywheel combo shipped 21154 and for installed as well. 98 legacy 2.5L thanks!!

You have a pm. Sorry for the delay.

Rich

Can I get a quote on an Exedy Stage 1 and flywheel combo (if you got it) to 92618?

Thanks :D

Can I get a quote on an Exedy Stage 1 and flywheel combo (if you got it) to 92618?

Thanks :D


You have PM.

Rich

Got the clutch in last week. Thanks for the quick shipping.

Got my Clutch yesterday, Thanks again. I learned something from the UPS driver. When shipping to Canada, ask to have it shippied via air as my brokerage fees were $45 and this few is included in the air frieght charges. So it's probably cheaper and faster.

Thanks again.

Got the clutch in last week. Thanks for the quick shipping.

Anytime. Thanks for the business.

Rich

Rich,

Do you have the Exedy Stage 1 for a 99RS in Stock? How much shipped to NJ??

-al

Rich,

Do you have the Exedy Stage 1 for a 99RS in Stock? How much shipped to NJ??

-al

In stock. You have pm.

Rich

Emailed you last night asking about Exedy flywheel & Stage 2 (single ceremetallic) clutch kit - if in stock & price shipped to 06040.

Thanks,

-Keith-

how about just a flywheel?
fitment for an 02 rs

could you PM me the price of an exedy twinplate for 04 STI?

hey i know i asked this a while back but could i get a quote on a exedy stage 1 clutch shipped to 99515
thanks

mike

hey i know i asked this a while back but could i get a quote on a exedy stage 1 clutch shipped to 99515
thanks

mike


You have a pm

nicole

exedy stage 1 w/ flywheel to 06539?

exedy stage 1 w/ flywheel to 06539?


You have a pm.

Thanks,
Nicole

Exedy Stage 1 w/ flywheel shipped to 92883 please. BTW how many lbs the clamping force and weight of the the lightened flywheel? Engagement? Harsh or close to stock?
What's a good price quote for an install? Will this be good for 300-320whp?

Sorry for the interrogation ahhaha
Thanks

how much for a Exedy Twin Plate for WRX shipped to NH 03064

Exedy Stage 1 w/ flywheel shipped to 92883 please. BTW how many lbs the clamping force and weight of the the lightened flywheel? Engagement? Harsh or close to stock?
What's a good price quote for an install? Will this be good for 300-320whp?

Sorry for the interrogation ahhaha
Thanks

bump???

Exedy Stage 1 w/ flywheel shipped to 92883 please. BTW how many lbs the clamping force and weight of the the lightened flywheel? Engagement? Harsh or close to stock?
What's a good price quote for an install? Will this be good for 300-320whp?

Sorry for the interrogation ahhaha
Thanks

You have a Pm with price. The clamping force is 2300lbs, or 44% torque increase. The flywheel weighs ust over 13lbs. The engagement is close to stock, slightly harsher. It should work fine for 300-320 wheel horse, depending on how often you plan on launching the car. Installation time is between 3 and 4 hours for most shops, so just multiply their hourly rate by that to find a "fair" price.

If you have any more questions, feel free to ask!

Rich

Send you a PM... please respond ASAP!

Thanks :)

bump??

bump??
You have pm.

Rich

I am in the market for a clutch...i have a header and 2.25" exhaust right now. I plan on adding a high flow cat pipe and Cobb intake in the future... do recommend an exedy OEM spec or Stage 1 clutch. I don't plan on launching the car. It's a DD...Thanks in Advance....

I am in the market for a clutch...i have a header and 2.25" exhaust right now. I plan on adding a high flow cat pipe and Cobb intake in the future... do recommend an exedy OEM spec or Stage 1 clutch. I don't plan on launching the car. It's a DD...Thanks in Advance....


You have PM

Rich

Precision Tuning

You have a PM

pm price of exedy twin plate for 05 STi shipped to 06053.

what clutch and or flywheel would you recommend for an 04 STI daily driver making about 300-330. pm me info and price please, no install.

You have PM's!

Thanks!

Rich

pm'd you about a clutch shipped to canada =D

pm'd you about a clutch shipped to canada =D

You have one back!
Rich
:banana:

HP rating on the Exedy stage 2 for the WRX?

I ran the super street on a 309whp wrx for a year no problems, My new motor will be a 2.5 hybrid with a 20G, looking for about 330whp daily driver, 350-370 on the "fun" map. Will this clutch hold up?

HP rating on the Exedy stage 2 for the WRX?

I ran the super street on a 309whp wrx for a year no problems, My new motor will be a 2.5 hybrid with a 20G, looking for about 330whp daily driver, 350-370 on the "fun" map. Will this clutch hold up?


You have PM!

Thanks!
Rich

Exedy Twin Plate for an STi 6spd shipped to 01741 (business addy)?

Rick

stage 1 clutch shipped to 78249?
without flywheel.

thanks :D

stage 1 clutch shipped to 78249?
without flywheel.

thanks :D
You have a PM!

Rich

Exedy Twin Plate for an STi 6spd shipped to 01741 (business addy)?

Rick

PM'd!

Rich

Exedy Stage 1 for a '98 RS shipped to 06269 (business addy)?

-James

Exedy Stage 1 for a '98 RS shipped to 06269 (business addy)?

-James
You have PM!

Thanks.
Rich

Prices still valid. Gearsets and fluids also available shipped or installed!

Rich
:banana:

how much for exedy stage 1 and exedy flywheel shipped to ca 94501

how much for exedy stage 1 and exedy flywheel shipped to ca 94501

You have PM!

Thanks!

Rich
:banana:

Hey how much for a Exedy stage 1 organic for a 2.5 shipped to 99163? also how much for a act street light flywheel?

Thanks

whats the Torque Capacity Increase, Clamp Load, Spline Teeth / Major Dia, Disc O. D. for the Exedy Stage 1 Organic?

Hey how much for a Exedy stage 1 organic for a 2.5 shipped to 99163? also how much for a act street light flywheel?

Thanks


You have pm!

Thanks

Rich
:banana:

whats the Torque Capacity Increase, Clamp Load, Spline Teeth / Major Dia, Disc O. D. for the Exedy Stage 1 Organic?

24 Spline, 25.2mm hub id, 230mm disc od. 2300ft/lb clamp load. Exedy lists it as 44% over stock.

Thanks

Rich

hey im debating if i should get the stage 1 or stage 2. i already got the pricing for stage 1 so i was wondering if you would pm the specs for stage 2 and pricing shipped to ca 94501

hey im debating if i should get the stage 1 or stage 2. i already got the pricing for stage 1 so i was wondering if you would pm the specs for stage 2 and pricing shipped to ca 94501

You have PM!

Rich

:banana:

how much for exedy stage 1 organic clutch kit shipped to 92108?

how much for exedy stage 1 organic clutch kit shipped to 92108?

You have a pm.

Thanks!

Rich
:banana:

Thanks for helpin' me get the ACT clutch. Excellent service and communication :-)

Thanks for helpin' me get the ACT clutch. Excellent service and communication :-)

Anytime. Thanks for the opportunity!


Rich

Hey how much for an Exedy stage 1 organic for an 01' RS 2.5 shipped to 66204?

Hey how much for an Exedy stage 1 organic for an 01' RS 2.5 shipped to 66204?

You have a PM.

Thanks

Rich

how much for a exedy stage 2 shipped to 91709?

how much for a exedy stage 2 shipped to 91709?
You have a pm.

Thanks,
Nicole

You have a PM.

Thanks

Rich

Thanks Rich and Nicole already received the unit!

exedy sport w/ flywheel for 2000 RS shipped to 44223. Thanks.

exedy sport w/ flywheel for 2000 RS shipped to 44223. Thanks.
You have a pm

Thanks,
Nicole

need a quote on both stage 1 and stage 2 act kits for 03wrx

need a quote on both stage 1 and stage 2 act kits for 03wrx

You have a pm!

Thanks!

Rich
:banana:

I need a clutch that will hold a litle over 400awhp on my sti.

im debating between the act stage2 and exedy stage2.

can you pm me a price to ship to 20832

thank you!

PM'd.

Rich

how much for a act street lite flywheel for 04 STI shipped to 94404? and the Prolite? Thanks!

How much for an ACT street disc for an STI 6 speed?

how much for a act street lite flywheel for 04 STI shipped to 94404? and the Prolite? Thanks!

You have a PM.

Thanks
Rich

Rich, you have a PM.... need the clutch ASAP.

Rick

Rich, you have a PM.... need the clutch ASAP.

Rick


You have a PM.

Thanks!

Rich

Pmed you guys

Pmed you guys
You have one back. :D

Thanks!

Rich

Edited post with new pricing.

Rich

Bump

Rich

How about a clutch for the '05 Legacy 2.5GT??? I sent a stock clutch kit to Bully Clutches to build one for the LGT but still havent heard back and I need a clutch ASAP. Let me know if you can get your hands on something, if so ALOT of Legacy GT guys would buy them.

-Matt

How about a clutch for the '05 Legacy 2.5GT??? I sent a stock clutch kit to Bully Clutches to build one for the LGT but still havent heard back and I need a clutch ASAP. Let me know if you can get your hands on something, if so ALOT of Legacy GT guys would buy them.

-Matt


Pm'd!

Thanks!

Rich
:banana:

Still going!

Still Going!

:banana:

http://www.precisiontuning.com/nonsense/stishifter.jpg

$178.88!!

http://www.precisiontuning.com/nonsense/wrxshifter.jpg

http://www.precisiontuning.com/nonsense/wrxshifterbushings.jpg

$135.00!!!!!


Rich

Thanks again Rich for a great deal on the Exedy clutch!

Updated!

Pm for some killer pricing!

Close to 11 pm and still at the shop bump :disco:

Happy July 4th!

Bump!

:banana:

Bump :banana:

:disco: :disco: Bump :banana: :banana:

Now our favorite WRX Short Shifter Kit comes with both front and rear bushings!!!!! And get this... the kit remains at the same price!!!!!!!!!!:banana::disco:

:) Still more clutches and short shifter kits waiting for a home

Ttt:)

PM me the price for the Exedy twin plate clutches for a STi, both cermatallic and carbon versions. I believe the part numbers are FM022SD and FM022SBMC.

Thanks,
-D

Price for an ACT Stage 1 clutch with lightened flywheel installed?

Price for an ACT Stage 1 clutch with lightened flywheel installed?



PM'd :)

New Clutch Special Thread!!!!!!!!!