Hi all, need to sell off these last few trannies....Thanks for everyones support, and thanks to all that purchased from me!!! Remember all these trannies are as new, and have little mileage, or delivery mileage. Non accident parts...

only a few left...

ALL prices shipping not included..[/COLOR]

2004/5 6 speed non DCCD 3.9 with 44miles on it @ $SOLD,(brand new)

2004/5 6 speed non-DCCD 3.9 suretrack tranny @ $4200ea, last one

2004/5 6 speed non-DCCD 3.54 suretrack tranny @ $SOLD,

these new style 6 speeds need to have the new style axles attached...

diffs...

R180 3.9 diff, $850ea. JDM suretrack,

R180 3.54 diff, $850ea. suretrack,

R160 4.44 suretrack diff. $800 (like new)

R160 4.44 open diff,

new style 6 speed complete axles for newer trannies when in stock are $330ea

you can also get brand new 2004 STi cv stubs for anout $250ea and use your exisiting axles....

act fast, these won't last.....

How many miles on the 2 non-DCCD trannies?

:) .....

Do you guys have either a us spec sti or jdm spec c driveshaft?

I need a R180 3.90 diff, but it's very difficult if not impossible to use with 02 WRX brakes/axles, etc., correct?

What comes with it? Just the diff?

Thanks!

Damn those diffs and trannies are CHEAP!!!

Too bad I am broke :(

Mike

drivrswntd.....I'll see if I have an extra propshaft....

n2xlr8n.....the 3.9 R180 will not work with the r160 axles, ...you must use the R180 axles, and R180 hubs...If you want the complete STi rear end it costs just under $3k for everything including e-brake parts, backing plates, links, trainling links, brembos etc...

Are you able to aquire all the parts to make this a "bolt in" deal for a GF8 (old school turbo wagon)

DoctorNick....

absolutely.....I have propshafts, and R160 3.9 ratio diffs to accomodate your existing axles......then it will bolt in....

Do you have any 4.44 ratio difs? Gonna be in the office tomarrow?

yes I do have one, I got it with an RA 4.44 tranny.......but all my 6speed trannies are 3.9....pm me with your plans....

Does the r160 come with any sort of lsd?

-Chav

What would it take to put one of these with the dccd on a '02 usdm wrx? I'm assuming it's not a shade tree mechanic skill level install...

*EDIT*
I found the Transmission FAQ and I don't have the money for labor or an STi rear end yet which looks to be the right way to do things. Maybe this summer...

Will the R160 diff will bolt right onto my 02 wrx wagon? is this a better rear end than getting a Legacy ring and pinion and putting it in my stock diff? Also interested in one of the JDM 6mt's. What is involved in getting the DCCD to work with my car? Also, are the non DCCD trannies Suretrack?

thanks

Chigliakus...thats's cool....

Chav...no LSD....

wkw.....yes the diff will bolt right up,...this is an alternate method to save in costs so that you can use your existing axles etc...it is pretty well the same thing as swapping internals.........As for DCCD , it involves some wiring , and not for the beginner...I'll reconfirm what trannies were suretrack, I know a few DCCD ones were.....I'll check and PM you....

Do you have any driveshafts you could sell?

R160 3.9 diff, what car are those off of?

garface....they are from open diff JDM legacy's....

R160 3.9 diff is sold.....

thanks

another low mileage tranny finds a new home :)..

thanks

these trannies must find a new home.....if anyone is intertested pm me with best offers....

thanks

Adrian

Do you have any JDM STI rear axel available?
How much for the JDM STI's rear axel……….

Thanks


Jose Savinon

POST edited and new trannies and diffs added....

interedted in the R160 4.44 suretrack and a 6sp driveshaft...pm me with price/availability please :)

Kwyjibo pm'd you

bump for potential buy

no probs, let me know how I can help...

Do you have any 5mt's with 4.44 final drive?

I'm in the market for a trans (mine's dead and my engine build is done), and I am trying to decide between 5mt or 6mt.

Do the DCCD trannies come with the controller?

If I go for the 6mt, I need a driveshaft too.

PM me with what you have and prices.

Thanks.

Scoob.

any of these happen to be USDM/CDM 6MT's?

thanks

Gator GT....yes....the 3.54 DCCD ones are the same

can you pm me a price on:
2005 DCCD 6pd(3.54)
r180 diff(3.54)
drive shaft for a 5spd swap
axles(if i will need them)
installation price and time

thanks!!!
bryan

The USDM and JDM STi rear diffs have different ratios?

bump for quote

surfer5567......pm'ing you....

garface....the trannies we get are from Japan, but some of them are destined for export to other countries.......so all sorts of ratios are available....

returned pm

pm'ed you

what about clutches?

burrito007.....what model do you need?...

Need 6MT front axels. please PM.

Pm'd you

prices adjusted,...these trannies are like new.....2/3rd's are gone, lets find the last few a home....

thanks all so far that purchased a tranny....:)

I purchased one of these trannies, and I can vouch for Flat4.... My tranny and axles look practically brand spanking new!

Thanks Flat4!

Scoob.

thanks scoob......I'm glad your happy.....let me know when your monster is ready...please send me some pics...

thanks again

Do you have any rear R180 axles for sale??/

AXA......I'll double check tomorrow.....I'm pretty sure I do.....

Thank you sir...........

last 3.54 6 speed sold.....thanks!! 2 as new trannies left......

thanks for everyones business...

Adrian

AXA......I'll double check tomorrow.....I'm pretty sure I do.....


?????????

AXA.....sorry, I thought I pm'd you.....I don't have any rears at the moment...Just fronts....I should have a wack coming in on the next order....

Can I get a price for the non dccd 6spd, r180 diff, shafts and axles shipped to 40515?

JakeInKY...pm'd you