View Full Version : JDM STi 5 Speed's DCCD & Non-DCCD & Tiptronic
gr8wheels 12-28-2004, 11:54 AM We Include Everything to make your swap as simple as possible, NO ONE includes more!
PRICES LOWERED!!!!
~Version 5 Impreza WRX STi 5 Speed STi hardend gear transmission handle 300+Hp, Linkage, crossmember, driveshaft, R160 Diff, & 4 CV Axles. Low Miles! $2500.00
Also:
~1995 Version 2 WRX STi Type RA 5 speed hardend gear DCCD Transmission, DCCD ECU, DCCD roller knob, Linkage, driveshaft, Rear Lsd Diff, 4 Cv Axles, tranny crossmember. Between 45k miles. $3000.00
Also:
2002 LEGACY B4 RSK Tiptronic Automatic Transmission, Driveshaft, rear diff, $1500.00
More detailed facts from our friends at Ravensblade (click here) (http://www.ravensblade-impreza.com/techdocs/history/history.html)
Dont forget to check: http://www.gr8wheels.com/Forsale.html
Thanks, Jon
Gr8wheels.com
480 560 3488
GTScoob 12-29-2004, 02:21 AM Will the axles be the correct width to fit an 02 wagon?
gr8wheels 12-29-2004, 03:10 PM Will the axles be the correct width to fit an 02 wagon?
I believe so becaue GC's share other suspension components with GD Wagons, I think they are the same.
gr8wheels 12-30-2004, 11:01 AM Call us anytime 480 560 3488
Jon
GTScoob 01-02-2005, 10:35 PM Will you be in tomorrow morning/afternoon?
gr8wheels 01-03-2005, 11:53 AM We are In right NOW!
blueribbon 01-03-2005, 10:48 PM will the ver 5 tranny fit directly with a 2002 wrx sedan?
What is the difference between this tranny and the v6 gears?
Mike
gr8wheels 01-04-2005, 11:15 AM will the ver 5 tranny fit directly with a 2002 wrx sedan?
What is the difference between this tranny and the v6 gears?
Mike
Yes it will bolt right up!
From what I know they are the same internaly....possibly different ratios...
TrizzyDizzy 01-04-2005, 12:55 PM OMG! i iwhs i had the money for this. Its soo much easier it looks to do than puttin the gears in your existing box! How hard to get the DCCD to work?
gr8wheels 01-05-2005, 01:01 PM OMG! i iwhs i had the money for this. Its soo much easier it looks to do than puttin the gears in your existing box! How hard to get the DCCD to work?
yes its much easier to swap a box than to replace gears, and its sometimes cheaper this way too! Buy donor box 1000+ gears 1500+ labor 800+ installation into car 1000 your at & $4300! its cheaper to just replace the whole tranny! with us!!
The dccd can be wired in since we include so much more than other people it makes it easier to get that wired up.
beecha91 01-06-2005, 03:38 PM Still have the version 5 trans and etc? Also which would be better for higher hp the version 2 or version 5 and how low is low miles on the version 5? Thanx a lot
Don-
:devil:
gr8wheels 01-06-2005, 06:41 PM The version 5 is the best choice for your 02-03 WRX
Kevin
beecha91 01-09-2005, 02:38 AM Any details on the front and center diff's? Also how low is low miles?? thanx
Don
gr8wheels 01-10-2005, 12:51 PM what kind of details are you looking for?, miles are under 40-45k on all above
GTScoob 01-11-2005, 11:44 AM Is the ver5 transmission and all still available?
gr8wheels 01-11-2005, 12:32 PM Is the ver5 transmission and all still available?
Yes it is call me
Jon
480 560 3488
THAWA 01-16-2005, 01:33 PM Can you tell me more about the RSK trans, is it a VTD? Does it come with a TCU and wiring? What are the gear ratio's and what is the final drive? How is the "Tiptronic" set up? Does it use the same style as the 03-04 legacy/baja shifter or does it have steering wheel mounted buttons? Will it come with that?
gr8wheels 01-17-2005, 11:42 AM Can you tell me more about the RSK trans, is it a VTD? Does it come with a TCU and wiring? What are the gear ratio's and what is the final drive? How is the "Tiptronic" set up? Does it use the same style as the 03-04 legacy/baja shifter or does it have steering wheel mounted buttons? Will it come with that?
Thats a hole lot of questions!
Yes it has the steering wheel shifter and the wheel is included, you can also shift via shift lever if you slide it over.
Whats VTD? we should have the TCU and we have the Wiring cause its still in the car! Here is the Tranny code I dont know what the ratios are: TV1B4YBDAB
Jon
480 560 3488
THAWA 01-17-2005, 07:32 PM Heh, I like to be thorough :D. How is/was the fluid in the tranny? Will it come with the wiring fully uncut from tcu to trans? How much is shipping looking like to 95841? Is it coming with the panel surrounding the shifter aswell? What's the mileage on it? What about the crossmember? Torque converter? Shift cable from shift lever to trans? Is the rear a r160 or r180? Does the steering wheel come with the boss and all related wiring (buttons, cruise, airbag, etc)? Do you have a picture of everything that it comes with? Does the owners manual say anyting about the ratios (assuming it has one)?
gr8wheels 01-18-2005, 10:50 AM Heh, I like to be thorough :D. How is/was the fluid in the tranny? Will it come with the wiring fully uncut from tcu to trans? How much is shipping looking like to 95841? Is it coming with the panel surrounding the shifter aswell? What's the mileage on it? What about the crossmember? Torque converter? Shift cable from shift lever to trans? Is the rear a r160 or r180? Does the steering wheel come with the boss and all related wiring (buttons, cruise, airbag, etc)? Do you have a picture of everything that it comes with? Does the owners manual say anyting about the ratios (assuming it has one)?
please call.
Jon
480 560 3488
THAWA 01-18-2005, 04:04 PM Do you have a toll free number? Or should we just discuss this in e-mail?
Hyper 01-28-2005, 03:28 PM question on B4 tranny
-bolt on swap from 4EAT?
-how much power can it hold
-comes with TCU/how does it work (ie in terms of distribution between front and rear wheels)
IDAFC21 01-28-2005, 03:46 PM good lord why didnt i see this when i blew 2nd gear on new years eve :furious:
GTScoob 02-07-2005, 08:28 PM Jon,
The transmission got in today up at Subaru of Gwinnett and I'm going by tomorrow to check it all out.
Thanks for all the help.
Homemade WRX 02-07-2005, 08:43 PM you told me to check back in feb about radiators...do you have any in?
thanks, Micah
also quite interested in the ver 2 RA tranny, being my second gear syncros are dieing
are you sure you read the tranny code correctly...TV1B4YBDAB...because I can't find anything on it
Homemade WRX 02-07-2005, 08:50 PM move on...nothing to see here
:double post: :o
|