Take out JDM 4 pot brakes, Sway bars, Coilovers. & Strut tower bars.

~1 Last set of used Subaru 4 Pot big brakes for ANY Impreza 93-04 & Most any other Subaru!, bolt on, includes 2 calipers, Pads, 2 lines, 2 rotors, 2 backing plates. Rotors may need replacing, pads are about half life. NO HUBS included. Will need certain wheels to clear. $450.00 Set

~3 GC8 STi Rear sway bars 20mm will fit any 93-01 Impreza! Includes Endlinks, and bushings. $80.00 each.

~1 ARC Rear Sway bar, Hollow & adjustable will fit 02-04 impreza Rear, this is a Lightweight high quality upgrade! Made by ARC. $115.00

~1 STi replica? rear strut tower bar for a GF8 Wagon 93-01 Impreza Wagon. $50.00 silver aluminum cross bar Pink ends.

~1 AMTEC rear strut tower bar for a GF8 Wagon 93-01 Impreza Wagon. $100.00 See it here (http://www.gr8wheels.com/catalog/item/1574933/1025661.htm)

~1 Set of Fully adjustable Tein Type Ha's w/ helper springs for GC8 Cars 93-01 Impreza's Pillow mounts all around camber plates in front: $920.00 Tein HA w/pillow all around (JDM Teins are better than US Teins.)

~1 set of Fully adjustable Tein Type HR's w/ helper springs for GC8 cars 93-01 impreza's. Main springs are Swift Springs, pillow mounts in front with front camber plates $950 for Tein HR w/Swift setup. (JDM Teins are better than US Teins.)

Gr8wheels
480 560 3488

"Last set of used Subaru 4 Pot big brakes" are these STi Brembos?

"Rotors may need replacing" what do you mean by may? I'm interested in these if they're the Brembos and I can use the rotors, but I guess if the rotors were in good condition you'd want twice what you're asking...

i'll take the ARC swaybar. pming u now

Chigliakus: no they are SUBARU 4 pots, not Brembo 4 pots. Rotors are getting thin may need replacing.

HongKongBeef : Pmed you back!

Um, I thought the Brembos on the STi were 4 pots. What size are the rotors? Any pics, or can you tell me what they came off of so I can do some research?

Um, I thought the Brembos on the STi were 4 pots. What size are the rotors? Any pics, or can you tell me what they came off of so I can do some research?

They come on all STi Ra's from 96+ fronts or on all JDM WRX's 02-04 fronts. they have 11-12" rotors i believe. ill have pics tomorrow

brembos are also but much larger and way more expensive

ive been trying to buy stuff off you on and off for months, if i call tomorrow again who should i talk to? i know you have some parts i need, and i dont wanna hear go to the website because that wont help me i they are not listed..

Um, I thought the Brembos on the STi were 4 pots. What size are the rotors? Any pics, or can you tell me what they came off of so I can do some research?


the brembo brake setup was first used in i think the 2001 model(our 2002) of there sti.the first STI of the GD body code (sti has been around for years, not new like many think) the old GC body code cars used a 300zx style front and rear 4pot 2 pot brake setup.

the plus to the "subaru 4 pot" to the "brembo 4 po" is that the subaru ones the parts are cheaper, you can buy a set of good rotors and pads and the car will stop very nicely. while the same is true with the brembo they are just very expensive
another plus is that the 1998-01 RS 16in wheels will clear the 4pots which is nice because tires are much cheaper in a 16in size, plus snow tires are better in a narrow 205 than the 225

(u can see the wheels i mean in my "homepage")

does this guy work for gr8 wheels or something, yaz knows a lot

No he does not work for us as He can get good Pizza and Italian food in New York, and it is hard to find it here in Arizona!


Yas I just read both post! Jon # 480 560 3488 week days mine is 480-221-7808 most days!
Kevin

Do you still have the 4 Pots? Are they red? can I use the OEM WRX rotors on them

pmd ya

Remember, the Subaru 4-piston calipers need RS wheels (16x7 i think) to fit. OEM WRX wheels (16x6.5) don't fit without spacers. Most 17" wheels will fit too.

[you wouldn't be able to sell just the calipers and pads without the lines and rotors would you?] :)

Interested in the 4pot front calipers. Can I get a price without the rotors and backing plates?

Can you guys get used front axles/cv joints for an 02 WRX?

Still have the ARC sway bar?

Downfall: they are Black, reds are 675+ we have a set on ebay: http://motors.search.ebay.com/_W0QQsassZgr8tools

Psydotek: 4 pots are now on Ebay: http://motors.search.ebay.com/_W0QQsassZgr8tools

Chris51080: http://motors.search.ebay.com/_W0QQsassZgr8tools

bliu: nope sorry

Need4Boost: SOLD!

placed and order, thanks jon-i forgot i wanted 1 more thing though lol, u guys have the cover that goes inside the car to cover the wiper shaft?

This seller is not currently offering any items for sale.

All out of 4 pots?:)

All out of 4 pots?:)

talked to them a few days ago and they infact dont have any at the moment

Thanks.

YaZahX: sorry dont have the wiper piece

gpatmac: sold OUT! thanks!

^jynx^: you are right!

gpatmac: Np

You don't have to shout.;)

Well, keep me in mind for the next set you get in. For that price, I will be buying some from you.

i'm interested in the rear strut bar. can you pm me?

gpatmac: Sounds Good! Keep checking with us!

silent_rob_95: pming

PM sent.

Interested in the STI rear sway bar for a '00 rs, however I was under the impression that the STI sway bars didn't fit the rs?

Rob

Can you guys get me some good camber plates for a GC???