|
|
View Full Version : Redline Hood Dampers!
JnJassociates 02-01-2005, 06:00 PM For those who don't want the green ;) we have RedLine Hood Dampners!
These high quality units come with a factory warranty!!!!
They do require some drilling to install and comes with complete instructions. (Instructions are available on line as well, with clear pictures).
You can get the Standard hood lifts, which come with a 2 year warranty.
Or you can get the Elite hood lift, made from Stainless Steel and comes with a 4 year factory warranty on parts! You may use these units on fiberglass and Carbon Fiber hoods with a aftermarket hood kit.
Pricing is unbelieveable! :)
Standard: $52.00 shipped to the lower 48 states!
Elite: $112.00 shipped to the lower 48 states!!
These are not yet on our site, but we have already sold 5 sets!!!
Please pay pal us directly at JnJAssoc@aol.com
Here is what they look like:
JnJassociates 02-03-2005, 03:46 PM Bump for a great product at a really great price! :)
NavyBlueSubaru 02-03-2005, 09:03 PM Its interesting that they use different mounting spots than the tein and others ive seen on nasioc. Instead of mounting low on the hood and farther forward in the engine bay like others, these mount high on the hood and close to the winshield. How is the travel response on these? IOW, when do they start to push the hood up, how far must the owner lift the hood before these carry the weight themselves? They do look nice and the price is great. I just might get a set but the drilling sounds a bit suspicous.
Jeff
DrKicker 02-04-2005, 10:11 AM My roommate just ordered a set direct from Redline for his Mustang and they should be in early next week. I'm going to check out the product in person before I decide between these and the Tein's. The price is right, but I don't know about the drilling part.
JnJ, do you think brackets could be made to make these a bolt in setup like the other brands?
Paypal sent for the Elite set. :)
JnJassociates 02-04-2005, 05:36 PM Egan, you have mail. :)
Guys, these are high quality units manufactured by a company that is so confident in their product, they offer a 2 and 4 year all parts warranty on their hood struts. Who else offers that type of warranty for a product like hood struts?? Honestly, no one that I know of...:)
Many of the Mustang/Focus guys swear by RedLine's products and have recieved a write up in a few Mustang mags...
As for becoming a bolt on item, I doubt it, not without a lot of re-engineering. The bolt on sets use existing mounting holes. The design and mounting points afford you more room to work under the hood. The Redline sets are great for those guys who have CF and fiberglass hoods, as they have been set up to be modified to work with them... As opposed to the other brands that out right state they will not work with aftermarket hoods.
If you want to see how they are installed and a video of how they work take a look here...
http://redlinetuning.com/QL-SUBARU-WRX-0205.html
BTW, I would not carry an item if I did not feel confident in the quality of the merchandise. Our goal is to provide high quality items at prices eveyone can afford.:)
Bryan
www.JnJAssociates.biz
speedblind 02-07-2005, 06:57 PM How do these compare to the Teins in terms of how high the hood goes? How do they compare to stock?
JnJassociates 02-08-2005, 05:07 PM The Redline units raise the hood about the same as the Tein units, which is higher than the stock prop rod. What we found is the Redline units are more 'out of the way' compared to the Tein units because of where and how they mount. Giving you more maneuverability under the hood.
Both are high quality units, the Redline units are easy to paint or polish up the Stainless models. The Tein comes only in Tein green ( a good thing I think ;)).
JnJassociates 02-10-2005, 03:04 PM Bump for low priced high quality product... :)
esrogers 02-12-2005, 02:23 PM sent you an email
speedblind 02-14-2005, 11:20 AM Thanks for the reply - PM'd you about payment options.
JnJassociates 02-15-2005, 03:11 PM Speedblind, Pm'ed ya back. :) You are all set! ;)
Got mine last night. Thanks guys.
Quack 02-16-2005, 09:21 AM paypal sent :)
Speedwagon 02-17-2005, 12:12 AM Are these model specific, or more of a generic all around product? I'm looking for a 95-99 Legacy. If they fit, I'm in.
jedi_master 02-17-2005, 01:42 PM Are these model specific, or more of a generic all around product? I'm looking for a 95-99 Legacy. If they fit, I'm in.
I think they're model specific- I'd like to see them for the 2005+Legacy platform myself. The guys at legacygt.com would eay these up! Including me.
JnJassociates 02-17-2005, 04:29 PM Guys, I'm afraid they are model specific. Hopefully, we can get something going for the Legacy guys and gals... :)
JnJassociates 02-22-2005, 04:09 PM Bump for more fresh stock!!
blazerwrx 02-22-2005, 10:21 PM pm'd you
Quack 02-22-2005, 11:04 PM have mine shipped yet?
JnJassociates 02-23-2005, 04:46 PM Blaze, pm'ed ya back :)
Quack-shipped!!! :)
Remember we have the Standard for an amazingly low price of $52.00 shipped and the Elite which is made from SS for a little bling for only $102.00 shipped.
They come with an ALL PARTS warranty. Best in this segment. Take advantage now. so you can sport these at the next meet or show... :)
Bryan
Speedwagon 02-24-2005, 02:35 PM Guys, I'm afraid they are model specific. Hopefully, we can get something going for the Legacy guys and gals... :)
I'm sure with the new Legover out, there will be plenty that will want it for the '05+ cars. But if you did a Legacy GB, would you include all models that Redline makes?
More importantly, are you going to do one for the BD/BG 95-99 models?
JnJassociates 02-24-2005, 05:15 PM I'm sure with the new Legover out, there will be plenty that will want it for the '05+ cars. But if you did a Legacy GB, would you include all models that Redline makes?
More importantly, are you going to do one for the BD/BG 95-99 models?
When we say Legacy we are talking both BD/BG and B5. The B5 I understand is in planning stages right now...
What we try to do is show the manufacturer that there is a need for their product in a certain segment. After that, it takes a little time and patience... :)
Bryan
Hank3 03-01-2005, 10:40 AM Are there any performance differences between the Elite and Standard other than one being stainless steel (i.e. amount of hood travel, better shocks/tubes/ used, mechanisms)? $52 shipped for the standard is a tempting price compared to $102. I know you probably get what you pay for with the Elite one, but I'm not sure if I need the extra bling and possibly added benefits of it. I'll most likely paint them anyways.
JnJassociates 03-01-2005, 04:00 PM Hank, how are ya?
There is no operational difference. The difference is that the Elite units are stainless and come with a longer parts warranty. Four years vs. two years for the Standard.
We like to offer choices. :)
Bryan
Hank3 03-01-2005, 04:34 PM Doing well Bryan - hope business is doing well for you too ;)
Thanks for clearing things up for me. Are you able to get the Standard ones for an '00 Eclipse with the hood bracket hardware since he has a carbon fiber hood? I know that the Redline site offers them, but I'd rather give you business - customer loyalty :)
I figured I'd order a set for myself and brother to save on shipping. I may order some more Shining Monkey too. Spring is right around the corner and Summer will be here before you know it, so I need to stock up on some cleaning agents too.
JnJassociates 03-01-2005, 04:46 PM No problem! I will get you a price on the '00 Eclipse units. Take a look on the site, we have the full line of Shining Monkey . :)
speedblind 03-01-2005, 05:01 PM Just got back into town and my Standard set was waiting for me. First impression is that the directions are BY FAR the most detailed and accurate I've seen from ANY aftermarket parts purchase. Full-color photos of every step, detailed list of what you'll need to install as well as lots of helpful hints along the way. It's a small detail, but this kind of thing really instills confidence in the product. Impressive.
As far as the components, like I said I got the standard kit, and wasn't disappointed. Everything arrived in great condition, individually bagged, and the pieces all look to be of very high quality. You definitely get a lot for the $50 this kit costs. Two thumbs up.
Will post more info on install/issues when I get to it.
Hank3 03-01-2005, 06:00 PM No problem! I will get you a price on the '00 Eclipse units. Take a look on the site, we have the full line of Shining Monkey . :)
OK - just email me at hlk39@yahoo.com or PM me on here for the total price shipped for the following:
WRX Standard Redline Hood Dampners
'00 Eclipse Standard Redline Hood Dampners w/Aftermarket Hood Hardware & Bracket Kit
Rick539 03-01-2005, 09:19 PM Do you think they could be powder coated or would the heat be to much. That would really open up some options.
JnJassociates 03-02-2005, 05:36 PM Powder coating may not be a good idea due to the heat. You are able to paint them though...
JnJassociates 03-06-2005, 08:09 AM Bump for the orders! :)
In stock and ready to ship!
Hank3 03-07-2005, 02:32 PM Sent you Paypal Bryan :)
Hope to get them soon!!! :banana:
JnJassociates 03-07-2005, 06:53 PM Sooner than you think! ;)
You will love them! :)
Bryan
JnJassociates 03-11-2005, 03:32 PM Bump for a great product at a great price!
Hank3 03-11-2005, 06:23 PM Got the dampners today Bryan :banana:
Super fast shipping, great price, and wonderful service. Here's a pic of the items received (I got the Standard ones):
http://img.photobucket.com/albums/v294/Hank3/IMG_2849.jpg
I'm so glad that they turned out to be black with red and white accents - they looks VERY nice with quality components. Will post pics when I get around to installing them. Thanks again Bryan!!!
JnJassociates 03-12-2005, 07:31 AM No problem Hank! It is really going to look nice on your Rex... :)
Bryan
JnJassociates 03-19-2005, 08:57 AM Bump for more fresh stock! :)
Hank3 03-20-2005, 01:48 AM Got them installed today:
http://img.photobucket.com/albums/v294/Hank3/IMG_2901.jpg
http://img.photobucket.com/albums/v294/Hank3/IMG_2898.jpg
http://img.photobucket.com/albums/v294/Hank3/IMG_2899.jpg
http://img.photobucket.com/albums/v294/Hank3/IMG_2900.jpg
Video of the hood opening:
http://opusx.dyndns.org/henry/WRXQLVid.avi
The install took about an hour with my brother and I taking our time. I got the Standard ones as you can tell. Everything that came with these are of great quality. One of the best mods I've done to date with a great price to boot :banana:
Thanks again Bryan for the super fast service, price, and product.
JnJassociates 03-21-2005, 04:45 PM Thanks Hank! :)
Who else wants in on the next hot thing? ;)
LYHTSPD 03-22-2005, 03:27 PM I am going to check if I will be able to open my hood that far while the car is in the garage. The garage is under our bedroom, so the ceilings are a little lower than normal. If it will work out, you just sold another set. ;)
JnJassociates 03-22-2005, 07:20 PM LYHTSPD, sounds good! :)
gedwrx 03-23-2005, 11:53 PM Just pm'd you with some questions.
JnJassociates 03-24-2005, 07:46 AM Pm'ed ya back! :)
Are there any issues with leaving the hood open for extended periods of time (weeks)? Will this prematurely wear out the dampers?
JnJassociates 03-25-2005, 06:52 AM Egan, as with any other hood strut set up, including OEM, it will reduce the life of the strut. One way around it would be to use a small block of wood on each side to add support. If you wrap the blocks of wood with cloth it will not scratch or mar your paint. If you really plan on leaving your hood open for that long, I would suggest removing it. If your hood is open that long, you are either removing something or fixing something, in which case removing the hood is the best way to go about it...
Bryan
ilara72 03-26-2005, 01:37 AM Are these in stock?
JnJassociates 03-26-2005, 07:29 AM Ilara72, yes in stock and ready to ship! :)
Bryan
ilara72 03-26-2005, 08:49 PM Paypaled you.
Isaac
JnJassociates 03-27-2005, 07:12 AM Isaac, you have mail! :)
JnJassociates 03-29-2005, 04:02 PM In stock and ready to ship! :)
Bryan
AWDBST 03-29-2005, 10:28 PM Sent you a PM price shipped to 99507 for the standards?
Thanks
JnJassociates 03-30-2005, 05:20 PM AWD, pm'ed ya back. :)
AWDBST 03-30-2005, 11:13 PM Pay Pal'd you for the standards 2nd day air.
Thanks Josh
JnJassociates 03-31-2005, 02:54 PM On their way Josh! :)
Still have quite a bit of stock, both the Elite and Standard.
These are some of the least expensive but well made units on the market! :)
Bryan
nerobbq 04-01-2005, 11:46 AM Hi Bryan... New 05 STi, OBP/Silver, and New to NASIOC. Need stuff... am interested in these standard Redline units. Email or PM me with cost/shipped info to zip 54650. Thank You very much for any info you care to share.
sirbryanclark 04-01-2005, 03:52 PM any problems with rusting anyone? on the standards?
JnJassociates 04-01-2005, 04:32 PM nerobbq, pm'ed ya! :)
Sirbryanclark, if you follow the directions you should have no problems with rust. Redline as well as our company are based out of the East coast. We are familar with rust. :)
Bryan
www.JnJAssociates.biz
ilara72 04-03-2005, 11:52 PM Just did the install today. Pretty straight forward. Drilling holes wasn't a big deal at all. Excellent instructions by the way. :)
JnJassociates 04-04-2005, 11:54 AM ilara72, glad you like them!
Install is not as complicated or time consuming as most think, thanks to the excellent instructions!
Bryan
AndyM 04-04-2005, 12:15 PM Hello I sent payment just now. Hope they get here by the end of this week.
Shipping USPS priority mail a problem?
JnJassociates 04-05-2005, 12:48 PM Pm'ed everyone back. :)
AWDBST 04-05-2005, 11:34 PM Got my dampers today took less than 20 min. to install, they work great.
Thanks Josh
AndyM 04-06-2005, 12:04 PM Hey Hey I recieved mine today also. They look great. Install is tomorrow :).
JnJassociates 04-06-2005, 05:27 PM Post some pics Andy! :)
Josh, glad you like them!
Bryan
AndyM 04-07-2005, 06:32 PM I have one to show:
http://im1.shutterfly.com/procserv/47b5da26b3127cce915fe4cfb8c100000016108AYuW7JyzctR
JnJassociates 04-08-2005, 04:26 PM Noice... :)
Bryan
JnJassociates 04-11-2005, 02:41 PM Bump for fresh stock! :)
SQUAD_907 04-13-2005, 02:22 PM need shipped price to 99502... :D
JnJassociates 04-13-2005, 06:01 PM Pm'ed ya! :)
Bryan
JnJassociates 04-25-2005, 04:02 PM Bump for fresh stock. :)
Robmat 04-29-2005, 03:27 AM Will these fit a 2000 2.5 RS. or do you have a model that will?
Thanks-
Robmat
JnJassociates 04-29-2005, 08:06 AM Sorry nothing at this time for old school Imprezas :(
JnJassociates 05-05-2005, 02:42 PM We just received in another shipment... Ready to be installed by you! :)
Bryan
crash 05-06-2005, 03:32 PM Any word on fitment for the 05+ Legacy?
JnJassociates 05-07-2005, 05:40 AM Nothing as of yet...
Bryan
JnJassociates 05-22-2005, 10:04 AM Guys we have in stock and ready to ship the Elite and the Standard units.
Best pricing on these units is here!
Bryan
static_rst 05-22-2005, 01:41 PM i just saw that you said there is nothing for the old school imprezas. is this still the case? i have a 99 and would love some, but if it won't work with them, i am obviously not going to get them ;).
JnJassociates 05-23-2005, 01:58 PM Static, I'm afraid as of right now there is nothing for old school imprezas... Hopefully not for long... :)
Bryan
crash 05-23-2005, 02:20 PM Static, I'm afraid as of right now there is nothing for old school imprezas... Hopefully not for long... :)
Bryan
Don't forget about the new Legacy as well!
timeless 06-06-2005, 01:51 PM Hey Bryan, I just sent paypal...my shipping info is included. Please PM me with tracking info here at NASIOC, thanks!
OneManArmy 06-06-2005, 05:06 PM anyone willing to post up a video of closing the hood with these installed?
JnJassociates 06-06-2005, 06:21 PM Timeless, done! :)
One man army, if you go to the Redline site, I believe they have video of install and closing and opening of the hood...
http://redlinetuning.com/QL-SUBARU-WRX-0205.html
Bryan
MK19_ 06-11-2005, 10:23 PM I have the Cusco FRP (fiberglass) hood- will just the strut kit do or will I need the aftermarket kit? The hood is heavier than stock- any issues there also? TIA
damon
JnJassociates 06-12-2005, 08:27 AM Damon you should be ok... It is all about the install. As long as it is installed correctly, it will work fine. The instructions are thourough and full of pics... All the pieces and hardware are included in the kit for the install...
Bryan
Murray 06-12-2005, 04:50 PM great product. i just installed mine yesterday.. a friend got em for me for my birthday. i didnt even know these existed till he started talkin about em, i was gonna buy the more expensive TEIN ones, but they interfere with working on the car..which i do quite often.
its definatly worth the 20-30 minutes or so it takes to install these, they definatly have easy to follow instructions with clear pics.
i've seen the Teins in person and installed these on my car, these are definatly less in the way.
heres mine:
http://www.pbase.com/roamin/image/44700917.jpg
http://www.pbase.com/roamin/image/44700922.jpg
and with the hood closed, they dont fully compress, so even if you mess up while installing the brackets, they wont prevent the hood from closing.
http://www.pbase.com/roamin/image/44703297.jpg
JnJassociates 06-13-2005, 11:34 AM Murray, You have a very good friend. :)
Glad you like them!
Bryan
Murray 06-13-2005, 08:14 PM Murray, You have a very good friend. :)
Glad you like them!
Bryan
i helped him with a few things on his car.... so he owe'd me.. but yes, a good friend indeed.
these are definatly a great product.
Murray
eqlized_aero 06-13-2005, 10:49 PM Any word on whether or not these fit the 9-2x? I'm assuming it wouldn't be an issue...
Murray 06-14-2005, 01:20 PM Any word on whether or not these fit the 9-2x? I'm assuming it wouldn't be an issue...
if the hood is aluminum, i'd say they'll work. the hood couldnt have changed THAT much, and the fender mounts are exactly the same, so i'd say they'll work assuming your hood is as light as a WRX hood.
somehow i doubt these will hold up a steel hood as easy as a aluminum.
anyone with a 02+ RS have these?... RS's have steel hoods, so i'd say if they work on the RS they'll work on the 9-2X.
BTW, nice choice.. arent they cheaper than a WRX wagon with all the discounts they're throwing out there?
JnJassociates 06-14-2005, 02:17 PM Yes they will work on the SAAB. They will also work with the RS and all new age Imprezas...
Bryan
eqlized_aero 06-14-2005, 03:52 PM Alright, I'll take a set - pm'd you
Murray - Yes my 9-2x was way below the cost of a WRX. I got it $10,500 off MSRP (last month incentives were better than this month if you actually were a GM employee/family member) so $19,000 (before tax, title, etc.) with HID, Leather, Heated Seats/Mirrors, etc.
Murray 06-14-2005, 09:20 PM Alright, I'll take a set - pm'd you
Murray - Yes my 9-2x was way below the cost of a WRX. I got it $10,500 off MSRP (last month incentives were better than this month if you actually were a GM employee/family member) so $19,000 (before tax, title, etc.) with HID, Leather, Heated Seats/Mirrors, etc.
cool, hope you like it so far... i wish i had one instead of my wagon.. sorta...
lol
im surprised the 9-2X didnt come with hood dampers. afterall, it is a "luxury" car.
JnJassociates 06-19-2005, 06:51 AM Well, it was only a matter of time...
Modified magazine is using the RedLine hood lift on their project STI. :)
Ready to ship today! :)
Bryan
brizey 06-25-2005, 03:37 PM Just got done installing. Very easy. Took about 30 minutes. The lifting/closing action is great. They give a lot of assist going up, but back off and gently stop at the top. It does not require a lot of pressure to shut and it basically drops at the end so you don't have to "press" the latch closed.
JnJassociates 06-26-2005, 05:33 AM Brizey, glad you like them!
Guys, we have units ready to ship! :)
Bryan
Speedwagon 06-26-2005, 06:20 AM Ok, so what makes these model specific? From what I gather, you have to drill holes to install these, yes/no?
I know the Legacy's hood weighs a TON compared to the WRX hood, but that won't be an issue shortly.
Murray 06-26-2005, 11:06 AM Ok, so what makes these model specific? From what I gather, you have to drill holes to install these, yes/no?
I know the Legacy's hood weighs a TON compared to the WRX hood, but that won't be an issue shortly.
i would assume clearance issues and hood weight is what makes them modle specific.
holes must be drilled in both the inner fender mount and the hood.(none visable when its all closed)
i imagine they'd work on a Legacy with carbon/aluminum hood, as long as you measure the same as the WRX instructions say to.. but dont go by my word on that... i dont know if they will actually FIT under the hood on the legacy
Speedwagon 06-27-2005, 06:13 AM Well, how much do the Elites run? If I can't use them, I can always sell them off again, and we will all be the wiser.
Impreza2003 06-27-2005, 03:57 PM will this be able to hold a heavy steel RS hood? 03RS
Thanks!
JnJassociates 06-27-2005, 04:24 PM Yes the design will be able to handle the weight of the steel RS hood.
Bryan
Impreza2003 06-28-2005, 12:14 AM the tempting level just sky rocketed!
a set will be in my future hopfully within 2 weeks!
Thanks!!!
JnJassociates 06-28-2005, 05:50 PM No problem!
:)
Bryan
eqlized_aero 06-29-2005, 05:05 PM I installed these this past weekend. I color matched the brackets just so it looked a little more factory. The hood lifts a bit higher than it would with the OEM hood prop. The teins may bolt on, but they obstruct the engine bay.
It was a simple install, however the brackets that go on the hood are specifically made for the WRX and the 9-2x hood is a bit different where the brackets go. I made it work, but you have to be a little more careful about positioning these then you would have to with a WRX.
Check it out...
http://www-personal.umich.edu/~afoley/saab/CIMG1447.jpg
http://www-personal.umich.edu/~afoley/saab/CIMG1451.jpg
AzN121184 06-30-2005, 03:46 AM these still in stock? pm me please!
interested in a set for the wrx in elite. thanks
JnJassociates 06-30-2005, 07:04 AM in stock. :)
Bryan
bfarm 07-04-2005, 12:33 PM Bryan,
I have a 2005 STi and I would like to get the standards because they are black. However, on your site, the listing says:
RedLine Hood Lifts Standard(WRX)
and
Redline Elite Hood Lift (WRXSTI)
Just to be sure - there is no functional or mounting differences between the Standard and the Elite - correct?
Thanks,
BFarm
JnJassociates 07-05-2005, 04:47 PM Bryan,
I have a 2005 STi and I would like to get the standards because they are black. However, on your site, the listing says:
RedLine Hood Lifts Standard(WRX)
and
Redline Elite Hood Lift (WRXSTI)
Just to be sure - there is no functional or mounting differences between the Standard and the Elite - correct?
Thanks,
BFarm
None, the diffrence is one is stainless steel and comes with a 4 year parts warranty and the standard comes with a two year parts warranty.
They are in stock and ready to ship! :)
Bryan
wile2k 07-08-2005, 10:20 AM PayPal sent, looking forward to them.
Free bump....
agterlik 07-09-2005, 06:16 AM They really need to design a set for the old school impreza's :(
JnJassociates 07-16-2005, 08:37 AM Bump for fresh stock... :)
Bryan
Rick539 07-17-2005, 11:11 AM paypal sent, bump for great vendor
JnJassociates 07-18-2005, 02:55 PM On the way Rick! :)
Bryan
jbruno 07-21-2005, 08:26 AM Bump and Subscribe...... I think I'm going to want these soon.... :)
jays05 07-23-2005, 11:39 AM I installed the standard hood dampers on my car last night... no issues, they fit and work great. Fast delivery, too.
http://img149.imageshack.us/img149/8841/newunderhood0gf.jpg
http://img310.imageshack.us/img310/4330/newunderhood24fh.jpg
JnJassociates 07-25-2005, 09:08 AM Looks good Jay! ;)
Bryan
JnJassociates 07-27-2005, 12:56 PM Bump for new stock... :)
Bryan
Bryan,
Can't get my replacement parts for my Tein hood dampers from Tein. (they say you guys are not dealers)
Got any Ideas?
Rhys
JnJassociates 07-29-2005, 07:03 AM Bryan,
Can't get my replacement parts for my Tein hood dampers from Tein. (they say you guys are not dealers)
Got any Ideas?
Rhys
Right! Your the guy who could not follow the instructions and broke your set of Tein units... Pm'ed ya... :)
Bryan
Lachlan 07-30-2005, 12:58 AM Will these work on the GC aluminum hood? (sorry if it's been answered, I didn't feel like reading all 5 pages...)
JnJassociates 07-30-2005, 06:46 AM Will these work on the GC aluminum hood? (sorry if it's been answered, I didn't feel like reading all 5 pages...)
Sorry, there is nothing available for the GC, yet...
Bryan
Lachlan 07-30-2005, 02:26 PM Can it be modified?
JnJassociates 07-31-2005, 09:17 AM Anything can be modified... The question becomes how much needs to be modified...
As of right now, we do not have the answer. If anyone would like to try, we have them in stock and ready to deliver...
Bryan
Lachlan 08-01-2005, 02:24 PM I'll be the guinea pig. Send me a set of standards and I'll let you know how it goes.
agterlik 08-02-2005, 07:00 AM I'll be the guinea pig. Send me a set of standards and I'll let you know how it goes.
Yay for someone taking the initiative in doing this.
Lachlan 08-02-2005, 07:10 PM How long do these take to ship?
JnJassociates 08-04-2005, 02:54 PM Check your mail. :)
If you had specified that it was for a WRX in your order, we would have been able to get it out to you sooner... ;)
Bryan
Lachlan 08-04-2005, 03:16 PM Sorry, I thought there was only one type :)
Leonardo 08-04-2005, 04:29 PM Any chance Tein Japan has the hood lifters out for the Legacy GT (05) ?
JnJassociates 08-05-2005, 05:55 AM Leo, I will check for you.
Bryan
Leonardo 08-05-2005, 09:11 AM Thanks Bryan!
JnJassociates 08-11-2005, 02:15 PM Bump for new stock. :)
Bryan
RADON 08-12-2005, 08:12 AM No legacy love...
awdlifestyles 08-12-2005, 04:24 PM What are the standard ones made out of??
Lachlan 08-12-2005, 04:49 PM licorice.
Or maybe mild steel.
awdlifestyles 08-12-2005, 07:12 PM MMMM....licorice (lick-or rice??? LOL!!)
Lachlan 08-12-2005, 11:06 PM Got them today--thanks! I'm in the middle of the swap so all hoods are off, but when the engine is in I'll see how hard it is to get them to work on a GC hood. Stay tuned...
JnJassociates 08-15-2005, 02:19 PM We have moved this item to the Exterior section.
Bryan
|