Google
 
Web NASIOC.com

View Full Version : FPRed First Pull


AutoMaster
06-20-2005, 10:34 AM
We installed an FPRed on our STi and at 13psi we made 327.4whp with out any major tuning. We then realized mid way through the pull we had a werd light smell of burning. We then found out that both passenger side coil packs had been defective and burnt themselves out (pics below)..so with this information we came out with the 327whp..

The new coil packs will be here and we install them and tune the 13psi and see how much more can be squeezed at such a low psi reading...Then as always the boost will be pumped up :) ...we will keep you updated.


c:\Documents and Settings\AutoMaster\My Documents\My Pictures\2005_06_02\109-0935_IMG.JPG
You can see from the dyno run no in depth tuning was done and you can see the coil packs going bad threw the pull.

c:\Documents and Settings\AutoMaster\My Documents\My Pictures\2005_06_02\109-0930_IMG.JPG
Coil Packs

AutoMaster
06-20-2005, 10:35 AM
C:\Documents and Settings\AutoMaster\My Documents\My Pictures\2005_06_02\109-0935_IMG.JPG

AutoMaster
06-20-2005, 10:36 AM
hmm for some reason the image isnt uploading..

AutoMaster
06-20-2005, 10:37 AM
Our dyno is a Dyno Dynamics

g0tb00st
06-20-2005, 10:38 AM
you can't host the images from your computer, you'll need someone to host those pics. email me the pics at olivenza@fas.harvard.edu and i'll host it for you.

Erik

AutoMaster
06-20-2005, 10:59 AM
I just found that out. We have a host which I will upload later on. But Thank You Erik. :)