does anyone have an aftermarket alarm, that works with a turbo timer?

here is my setup:

aftermarket alarm ignition wired hooked up to the accesory of the wrx

turbo timeer (blitz dual) with HKS harness installed per instructions except that I disconnected the accessory cable on the HKS harness.

with this setup, the engine will idle and the alarm will work like normal. With the engine idling, it may set off some of the sensors on the alarm so you have to adjust accordingly.

or what you could do is get an alarm with a turbo timer. I believe Alpine makes one..I think this is a better way to go.

WARNING: this is my setup, I'm gambling that the engine can idle without the need of the accessory cable ("on" or "+"). Do it at your own risk. The only problem I had was the radio. One morning, it wasn't working anymore. I pull the fuse and the fuse looked good. I put the fused back in again and the radio started working again normally. :rolleyes: