Crawford Performance is pleased to announce their new line of light weight Billet crankshafts. These cranks can be made to your specifications or you can choose from the designs that we have tested and use in our custom built engines. The difference in weight between the stock EJ257 crank and our Billet crank is one full pound :)

We will stock three different strokes, 79mm, 82.5mm and 84mm. Two thrust bearing locations, the third main or the fifth main. And two rod journal sizes, 48mm and 52mm.

Our Billet crankshafts use a specially designed oiling system that drastically improves the rod bearing wear. The current testing of our Billet cranks was done at a maximum HP level of 726 with the torque at 653 :eek:

We will also stock custom rods that are designed for the Billet stroker cranks. These rods will have inverted rod cap bolts for improved clearance. Another benifit to these rods will be the ability to change the rod bearings while the crank is still in the block.

Please check our website for pictures and prices.

Thanks,
www.crawfordperformance.com

One of our new billet cranks was in the Big Valley STI that set fast time for qualifying and Won overall at the Evo / Subaru shoot out at Englishtown raceway this month. :)

Sexy!

Sexy!

Thanks :)