Edo Performance
08-24-2005, 01:54 PM
EDO still have plenty stock of Zero/Sports performance exhaust parts!
http://www.edoperformance.com/store/images/zerosports/ZS-Exhaustmanifold2.jpg
Exhaust Manifold (Main 42.7mm, assembly 60mm)
Zero/Sports performed numerous tests on every driving stage and have succeeded in increasing exhaust efficiency in all areas. This highly efficient manifold has also been sound tuned. Prepared for WRC, we have realized a bolt-on answer to torque and power increase. Especially designed for use with the Zero/Sports up pipe to further reduce exhaust flow resistance and increasing exhaust flow. It's made for off-road/track use only, not suitable for streets. This piece is 100% SS and fits both WRX and STi!
http://www.edoperformance.com/store/images/zerosports/ZS-uppipe.jpg
Turbine Support Venturi (Up Pipe) (60mm-50mm-60mm) $470+S/H
Significantly cut down the restriction! Helps out on spool. A must for those upgraded their turbo. Fits both WRX and STi!
http://www.edoperformance.com/store/images/zerosports/ZS-N1DownPipeType2.jpg
N1 Type-2 Down Pipe
Significantly cut down the restriction! For those pushing higher psi and/or with upgraded turbo. Don't let backpressure slow you down! Fits both WRX and STi!
http://www.edoperformance.com/store/images/zerosports/ZS-WorldLeaguer.jpg
World Leaguer (JASMA complied; inlet 70mm, tail 101.6mm) $737+S/H
This model has been developed to enhance engine characteristics, and anti-corrosion while considering the necessity of noise reduction. Complying with JASMA specifications, this model utilizes high quality SUS304 metal, producing an all-stainless premium model. Fits both WRX and STi!
http://www.edoperformance.com/store/images/zerosports/ZS-CoolAction.jpg
Cool Action $187.11+S/H
Designed to get 100% out of your standard intercooler. By rectifying the bonnet intake duct air flow, the Cool Action fins maximize the amount of cool air distributed into the whole intercooler core. The faster you run your car, the lower the temperature it blows! At ~60mph/100kmh. If the air enters the scoop at temperature of ~65º, when it's inside the engine, the temperature is about ~37º. With Cool Action, the temperature of entering air is the same, but the temperature hitting the IC/engine is between 20-25º lower than normal. Both parts for WRX and STi is available!
http://www.edoperformance.com/store/images/zerosports/ZS-CoolRadiator.jpg
Cool Radiator $73.71+S/H
Almost 20% of the air taken into the engine bay escapes without hitting the radiator core, resulting in a cooling system that isn't totally effective. By installing Cool Radiator, you can reduce the amount of air lost by plugging up the gaps and sending more cool air into the radiator core. Fits both WRX and STi!
Above just some of the Zero/Sports products we have at EDO, please check out our website (http://www.edoperformance.com/store/) for complete inventory! EDO have lots of Power Enterprise EJ25 850cc injectors in stock as well! They are selling hot, get them while it lasts.
Ask for Louie or Terii
512.462.0125
louie@edoperformance.com
http://www.edoperformance.com/store/images/zerosports/ZS-Exhaustmanifold2.jpg
Exhaust Manifold (Main 42.7mm, assembly 60mm)
Zero/Sports performed numerous tests on every driving stage and have succeeded in increasing exhaust efficiency in all areas. This highly efficient manifold has also been sound tuned. Prepared for WRC, we have realized a bolt-on answer to torque and power increase. Especially designed for use with the Zero/Sports up pipe to further reduce exhaust flow resistance and increasing exhaust flow. It's made for off-road/track use only, not suitable for streets. This piece is 100% SS and fits both WRX and STi!
http://www.edoperformance.com/store/images/zerosports/ZS-uppipe.jpg
Turbine Support Venturi (Up Pipe) (60mm-50mm-60mm) $470+S/H
Significantly cut down the restriction! Helps out on spool. A must for those upgraded their turbo. Fits both WRX and STi!
http://www.edoperformance.com/store/images/zerosports/ZS-N1DownPipeType2.jpg
N1 Type-2 Down Pipe
Significantly cut down the restriction! For those pushing higher psi and/or with upgraded turbo. Don't let backpressure slow you down! Fits both WRX and STi!
http://www.edoperformance.com/store/images/zerosports/ZS-WorldLeaguer.jpg
World Leaguer (JASMA complied; inlet 70mm, tail 101.6mm) $737+S/H
This model has been developed to enhance engine characteristics, and anti-corrosion while considering the necessity of noise reduction. Complying with JASMA specifications, this model utilizes high quality SUS304 metal, producing an all-stainless premium model. Fits both WRX and STi!
http://www.edoperformance.com/store/images/zerosports/ZS-CoolAction.jpg
Cool Action $187.11+S/H
Designed to get 100% out of your standard intercooler. By rectifying the bonnet intake duct air flow, the Cool Action fins maximize the amount of cool air distributed into the whole intercooler core. The faster you run your car, the lower the temperature it blows! At ~60mph/100kmh. If the air enters the scoop at temperature of ~65º, when it's inside the engine, the temperature is about ~37º. With Cool Action, the temperature of entering air is the same, but the temperature hitting the IC/engine is between 20-25º lower than normal. Both parts for WRX and STi is available!
http://www.edoperformance.com/store/images/zerosports/ZS-CoolRadiator.jpg
Cool Radiator $73.71+S/H
Almost 20% of the air taken into the engine bay escapes without hitting the radiator core, resulting in a cooling system that isn't totally effective. By installing Cool Radiator, you can reduce the amount of air lost by plugging up the gaps and sending more cool air into the radiator core. Fits both WRX and STi!
Above just some of the Zero/Sports products we have at EDO, please check out our website (http://www.edoperformance.com/store/) for complete inventory! EDO have lots of Power Enterprise EJ25 850cc injectors in stock as well! They are selling hot, get them while it lasts.
Ask for Louie or Terii
512.462.0125
louie@edoperformance.com