Coming out really soon....

Sponsering this project.

I really want to thank Keven, Kitty, Chinky, and Gearhighms at AutolinkMotorsport for helping and doing a very good job with my project and they have always helped on every project that I've done :thumbup: . I want to thank JDMAutoHaus for the parts and Victor for being a very big help ,GoldenEagle for the sleeves,Exedy Japan for a custom thriple plate clutch and Bubba at Do It Dyno for His dyno time. :thumbup:


http://we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1MTI0MDZzNDEzZGZkMzF5NTQx
http://we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1MTIyNDZzNDEzZGZkMzF5NTQx
http://we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1MTIyNTZzNDEzZGZkMzF5NTQx
http://we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1MTIyNjZzNDEzZGZkMzF5NTQx
http://we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1MTIzNDZzNDEzZGZkMzF5NTQx
http://we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1MTIyNzZzNDEzZGZkMzF5NTQx
http://we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1MTIyODZzNDEzZGZkMzF5NTQx
http://we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1MTIzMjZzNDEzZGZkMzF5NTQx
http://we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1MTIzNjZzNDEzZGZkMzF5NTQx
http://we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1MTIzOTZzNDEzZGZkMzF5NTQx


The motor is going in 8/31/2005 and we should be able to start it on 9/3/2005


SPEC SHEET/PARTS LIST

CHASSIS

- 1990 Nissan 240SX (Silvia)
- Nismo Motor and Tranny Mounts
- Promod Custom 12-point roll cage
- Fuel Safe 15 gallon fuel cell
- Weldon fuel pump 2115
- Weldo fuel pressure regulator
- JDM S13 rear end w/4.10 final drive and custom oversize axles, Kaaz two-way limited slip
- Cannon Engineering custom drive shaft
- New OEM wire harness
- Stack digital dash cluster ST8130

ENGINE - SR20DET

- HKS Cams stage 3
- HKS Lash killer kit ( solid lifter kit )
- Greddy Valve Springs
- Crower Retainers
- Ferrea Custom Valves
- Greddy Rocker Arm Stoppers
- Greddy Adjustable Cam Sprockets
- Cylinder head square ported and polished by Mo Flo
- Apex’I 87mm head gasket
- Greddy 87mm pistons & rings
- Greddy rods & wrist pins
- Golden Eagle sleeves
- New OEM Oil Pump
- New OEM Rear Main Seal
- ARP Main Bolts
- Greddy Head Studs
- Greddy Oil Pan
- OEM Main and Rod Bearings
- Exedy triple plate carbon clutch kit
- B&M short shifter
- Nismo shifter
- Skyline brake & 5 lug conversion
- Greddy Electronic Boost gauge
- Greddy Electronic oil pressure gauge
- Greedy Electronic EGT gauge
- Greedy Electronic Boost controller
- Greddy Turbo timer
- Greddy Intake Manifold (ported by Mo Flo) w/custom 90mm throttle plate, Q45 throttle body
- Greddy Oil pan
- Custom Full-Race stainless turbo manifold
- Custom Fuel Rail
- Rochester 1600cc Injectors
- SplitFire Coil Pack
- Garrett GT40R dual ball bearing turbocharger
- 44mm Tial Wastegate
- 50mm Tial Blow-Off Valve
- Full-Race Custom 4” stainless down pipe
- Full-Race Custom stainless dump tube
- Full-Race Custom stainless exhaust manifold
- Apex’I GTR Intercooler Core
- Apex’I 3” IN Tanks
- Burns 3" aluminum intercooler U bend piping
- Meziere electric water pump
- Koyo radiator
- Dual FAL fan's
- Blitz upper radiator hose
- Samco lower radiator hose
- Cosworth 3-bar MAP sensor
- AEM EMS engine management
- AEM WEGO wide band a/f sensor w/gauge

I will post a video and dyno sooon


750HP+ 2.0L

Wow I can't wait to see some more pics, videos and dyno sheets.

Looks like a crazy car.

looks hella nice.
keep us updated.

looks hella nice.
keep us updated.


Thanks guy's :)

:eek: wow, very nice

That's one crazy list of parts 1600CC injectors... Can't wait to see the dyno numbers

YUMMIE. Small wasegate for a 40r no? But if it's a racecar, I guess you don't need such low boost for the street.

More updates :thumbup:

http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1Mjg2MjZzNDEzZGZkMzF5NTQx
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1Mjg2MzZzNDEzZGZkMzF5NTQx
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1Mjg2NDZzNDEzZGZkMzF5NTQx
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1Mjg4MTZzNDEzZGZkMzF5NTQx
http://www.we-todd-did-
racing.com/wetoddimage.wtdr/i=wMTA1Mjg3OTZzNDEzZGZkMzF5NTQx
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1Mjg2ODZzNDEzZGZkMzF5NTQx

More to come :)

http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1Mjg3MDZzNDEzZGZkMzF5NTQx
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1Mjg4MjZzNDEzZGZkMzF5NTQx
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1Mjg2NTZzNDEzZGZkMzF5NTQx
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1Mjg4NjZzNDEzZGZkMzF5NTQx
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1Mjg4NzZzNDEzZGZkMzF5NTQx
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1Mjg4OTZzNDEzZGZkMzF5NTQx

uber sexy!.. Keep up with the pictures as you progress :) .

that guy looks like he's got some nasty burns/scars on his arm

Very impressive build....really good looking job.

With a turbo that ginormous, why didn't you go with a built ka motor?

I love those wheels :D :D

I think you might be able to spin those awesome tires on the car. ;)

I love those wheels :D :D

I paid alot for them $$$$$$$$$$$$$$$$$$

Thanks :)

I really happy with them, but I think that thay are to wide in the back :(


I may paint them white or somthing

With a turbo that ginormous, why didn't you go with a built ka motor?
you are kidding right? A ka24de, over an SR20?

you are kidding right? A ka24de, over an SR20?
whats wrong with the ka? there are plenty of people making good power with it.

:o my lawnmower has a bigger turbo than that! syke! :eek:

whats wrong with the ka? there are plenty of people making good power with it.


I wanted an SR and yes you can make good power out of a ka motor also .


I will post more picture's today and I found out that we should be able to start the car next week

Date 9/03/2005

Mooooooooore Updates

http://we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1NDY3MDZzNDEzZGZkMzF5NTQx
http://we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1NDY3MTZzNDEzZGZkMzF5NTQx
http://we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1NDY3MjZzNDEzZGZkMzF5NTQx
http://we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1NDY3MzZzNDEzZGZkMzF5NTQx
http://we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1NDY3NDZzNDEzZGZkMzF5NTQx
http://we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1NDY3NjZzNDEzZGZkMzF5NTQx
http://we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1NDY3NTZzNDEzZGZkMzF5NTQx

;) :thumbup: :thumbup: :thumbup:

you are kidding right? A ka24de, over an SR20?

uh no, I'm not kidding....its called an iron block with a bigger displacement that is capable of handling just as much if not more power than an SR20.

bigger displacement = spooling that huge turbo faster than an SR20.

Hey, thanks for getting my pics up, GT40R. Let me know when you guys are ready to deliver it. I need to make some room first.

more pics!

more pics!


http://we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1NTk0MDZzNDEzZGZkMzF5NTQx
http://we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1NTk0MzZzNDEzZGZkMzF5NTQx
http://we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1Mjg4MzZzNDEzZGZkMzF5NTQx
http://we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1NTk0NDZzNDEzZGZkMzF5NTQx

My friends car is also coming out soon ....


http://we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1NTk0NTZzNDEzZGZkMzF5NTQx
http://we-todd-did-racing.com/wetoddimage.wtdr/i=wMTA1NTk0MjZzNDEzZGZkMzF5NTQx

:eek:

damn, sic picks....SIC WRX!

My friends car is also coming out soon ....


:eek:

coming out of the closet? no, we can allready tell, the color gives it away. jk, if its at the same shop as your car, i bet it will be a ****in beast!

is that jdmej20?

is that jdmej20?


Yes it is.

We are working on some new thing's and he should be able to finish the car within 2 more months :D

That is quite possibly the most sick nasty SR build that i have ever seen. Mad Props. :banana: