i went to change my bulbs again.......but i didnt like em so i decided to change em back, but the thing was, now the bulbs dont work so i tried to use the new ones i bought and they didnt work either, the stock ones didnt work either, could i have messed up the wiring for the low beams? how do i check....the high beams and fogs still work fine, could it be the bulbs could only be used once? i just dont understand how it works one second and not the next, and now i dont have low beams =/.

what bulbs did you have in there? wattage?

h1 sylvania silverstars

i just checked the fuses and nothings wrong with them

Silverstars are junk. Return them right now.

Got a multi-meter? If not, get one; try Sears for a variety of types and prices...

1 - Check the bulbs for continuity.
2 - Unplug the low beam sockets. Turn on the headlights: check across the terminals in each socket for 12V.

If #2 shows no voltage, then how did you check the fuses? Sometimes they fail but it can't be detected visually. Use the meter to check for continuity across the fuse, just like the bulbs.

i got it, when i took the bulbs out it musta burnt out or something cause i just bought new ones put em in and works fine....thanks for the help though

PM Billy C he had to rewire his headlights. He was having a problem but after rewiring it has worked since.

did you touch the bulbs with your fingers?

that will popem....... i know from experience