so I threw in an RS gas tank in my 94 L that was orginally FWD and converted to AWD then I put in a 01RS gas tank. now the RS has the charcoal canister in the rear with a bunch of hoses going to it. Mine only has 2 hoses going to in the front. I blocked off one of the hoses that goes stright ot the gas tank and was pretty tiny. another hose had to be extended for the over follow in the fillter. and the hose that goes to teh vent valves on top got connected to the hose that goes to the charcoal canister.

now the problem...
My gas tank has to much pressure. Gas from a pump will not allow any gas to go in the tank. if I unplug the charcoal canister air will come out when gas is put in but only from a remote tank. Also Gas is leaking ALOT from the top of the tank most likely the valves.

Tuesday I'm going to the shop to work on it any advice or info for me? anyone else do a gas tank swap thats similar what hosese could it be what did I do wrong

dan

find stimpy. He had a similar issue with his swap and emissions equipment. His story was (is) outlined in his FAQ thread on EJ20 Instructions.

GGT