Gt Spec

GT SPEC front strut bar for Subaru 2002+ Impreza WRX. Hallow internal struture for stronger support. Clear AC house. Perfect fitment, no modification necessary. **04+ STI will require modification to driver side IC bracket.Fits GD chassis.
135+shipping
http://www.gtspec.com/products/images/A-si-006-001.jpg
http://www.gtspec.com/products/images/f_strutbar_on.jpg


GT SPEC Rear Strut bar oval-type. The strut bar comes with double internal hallow wall structure for stronger support. The actual bar is made of alumimum with a high polish. Constructed by aircraft 6061 grade aluminum for rigidity and strength.Fits GD chassis
135+shipping
http://www.gtspec.com/products/images/sedanrear.jpg


GT SPEC Rear Strut bar round type. The rear strut bar is constructed of air craft grade 6061 aluminum for high rigidity. It's 40mm in diameter. Fits GD chassis
145+shipping
http://www.gtspec.com/products/images/r_strutbar_round01.jpg


GT SPEC Carbon fiber rear strut bar. Carbon is done is dry carbon process instead of hand lay carbon. This will ensure perfect carbon layout. This is the perfect bar to pick if you are searching for light weight bar and carbon look.Fits gc8 and wrxs/stis 02-05
195+shipping
http://www.gtspec.com/products/images/r_cfstrutbar_round01.jpg


GT SPEC aluminum 4 point ladder brace for GC8 Impreza.
135+shipping
http://www.gtspec.com/products/images/subgc8sus001-tn.jpg


GT SPEC anti lift kit for Impreza. Will fit most Subaru. Improve handling response. We CNC cut this piece from a air craft grade 7075 aluminum. This is stronger than most anti lift kit in the market. We utilize rubber bushing in our Anti-Lift Kit that is 30% stiffer than stock. This will give you the advantage of the Anti-Lift Kit but without the extra noise and lack of comfort.Fits subarus 93-05
155+shipping
http://www.gtspec.com/products/images/GC-GD-aniti-lift-kit.jpg

Feel free to e-mail or PM us with any questions you guys may have.
Cheers,
Peter
peter(at)synicmotorsports.com
Shuji
shuji(at)synicmotorsports.com
info(at)synicmotorsports.com

GT SPEC interior re-enforcement bar for Impreza. Tighten the chasis of the car from side to side. A must for auto x. This bar reside inside of the car on the back of the front seat along the floor. A perfect combination with the Sparco harness bar. Fits GD and GC chassis
150+shipping
http://www.gtspec.com/products/images/icrbsbar.jpg
http://www.gtspec.com/products/images/icrbsbar01.jpg


GT SPEC Subframe Reinforcement Brace (3 piece set). They will be constructed by the same aircraft grade 6061/6063 vacuumed out aluminum with hallow double wall design that is used in all GT SPEC suspension products. The result is incredible rigidity and a total weight saving of 6 kg/13.25 lb (half the weight of a stock Subaru Impreza). This is a 3 piece set, including one front piece and two side pieces. Fits GD and GC chassis
530+shipping
http://www.gtspec.com/products/images/New-Image.jpg


GT SPEC fender brace. Known as the "Gacchiri Support" in Japan or CAWL Support by SPT. This chassis reinforcement will greatly improves the handling dynamics of your car. Mounts onto the door hinge and inner fender, creating a triangular support that greatly increases rigidity over OEM. Confidence in steering is gauranteed while reducing flexing of the unibody. Fits GD and GC chassis
185+shipping
http://www.gtspec.com/products/images/IMG_0085-small.jpg


GTSPEC Trunk Cage effectly reduce rear chassis flex and improve handling and steering response. The trunk cage connects the rear strut tower brace to the trunk brace creating a cage. This is a simple bolt-in installation with no drilling required. Fits GD and GC chassis
340+shipping
http://www.gtspec.com/products/images/Collage-1.jpg

Megan Racing

Coilovers
-Spring Rates: 8kg Front and 6kg Rear
- 32 Levels of Adjustable Damper
- Pillow Ball Upper Mounts.
- Rubber Dust Covers.
- Dual Adjustable Ride Height
- Single-Cyliner Design
- Aluminum Brackets
- All coilover damper kits come with 1 year manufacture-defect warranty.
- All Hardware is Included
-Fits GC chassis and 02-04 wrx/sti. 05 sti fitment coming soon
899 shipped
http://www.meganracing.com/uploadImage/regular/WRX%20coilover%20I.jpg
http://www.meganracing.com/uploadImage/regular/WRX%20coilovers.jpg


Megan Racing H-braces
The H-Brace stabilizes the frame by supporting the chassis. The Brace provides high speed cornering stability with minimal chassis flex. Designed from Japanese technology.
65 shipped
http://www.meganracing.com/uploadImage/regular/WRX%20H-Brace.JPG
http://www.meganracing.com/uploadImage/regular/wrx%20h%20BRACKET.jpg

HELIX

Helix DNA Series Coilovers for 02-04 WRX/STi - $999.00 shipped

Light aluminum Shock Body
45mm Piston Shaft- 16 Pt Dampening / Rebound Adjustable
T6061 Aluminum Top Hats
Full Upper Pillow Ball Mounts
Camber Adjustable (Most Applications)
Inverted Design Available (Some Applications)
Dual Height Adjustment (Base collar and spring perch)
Standard Spring Rates 7kg/5kg (Custom Rates available)


http://www.helix-power.com/susp/GDBCoiloversMain.jpg
http://www.helix-power.com/susp/GDBCoilovers2.jpg

NOTE*Helix DNA series for 05+ STi, and RNA series for 02+ WRX/STi COMING SOON!!!

Buddy Club


Buddy Club Racing Spec Damper
Racing Spec Dampers inherited the same great quality of the P-1 racing damper. Each Racing Spec Damper is made with special components and are tested and produced with out compromise. Each damper are assembled by skilled engineers to provide the best quality possible.
-8/6 spring rates
-15 way adjustable
-Dual height adjustability
-Monotube design
-Available for GD and GC chassis
http://www.buddyclub.us/buddyclub/rsd/images/sp_6.jpg
http://www.buddyclub.us/buddyclub/rsd/images/sp_4.jpg
http://www.buddyclub.us/buddyclub/rsd/images/sp_7.jpg
1400+shipping

Are you sure the DNA's spring rates are 7 / 5 and not 8 / 6?

per helix's website:
http://www.helix-power.com/susp/Coilovers_app.htm
I also thought it was 8/6, but saw that it was stated 7/5 on their site

will the Gt-Spec Trunk Brace Fit with a V-Brace?

I don't think so as the trunk brace uses the mounts that the v-brace mounts to on the strut brace :( Sorry

come get your suspension on

evening bump

for the suspension freaks

still got some suspension bits for sale

hummm that fender brace is temping me....

more temptation for you except with a more expensive fender brace from nagisa we can get you for 225+shipping:-P
http://i14.photobucket.com/albums/a332/petawabit/nags6.jpg
http://i14.photobucket.com/albums/a332/petawabit/nags5.jpg
http://i14.photobucket.com/albums/a332/petawabit/nags4.jpg

hey peter, will the GTspec truck cage fit my GF8?

I might go wit hthe GT spec one. its cheaper and it looks like theres more to bolt up. is there anyone who has these? I'm curious what hte difference is like

Dan

hey peter, will the GTspec truck cage fit my GF8?
Let me confirm that John. I know they will fit the sedans and coupes. Should fit your wagon though, but I'll let you know for sure

I might go wit hthe GT spec one. its cheaper and it looks like theres more to bolt up. is there anyone who has these? I'm curious what hte difference is like

Dan
Dan,
yeah, that's what I was thinking, but I'm pretty sure that the holes in the very middle(between the door hinges) aren't used as I didn't see any holes there when I installed my nagisa auto fender brace. I'm sure the difference is negligible. These bars alone make a pretty dramatic difference, especially on a impreza L's that don't have fender braces to begin with and have some pretty aggressive suspension.

sema bump

What does the rear lateral bar of the trunk cage bolt to?

(the bar parrallel to the strut bar)

Also, can the front ladder bar be combined with the subframe reinforcement set? it seems as though the ladder bar could be used to tie the 3 seperate pieces together.

Hi, we will find out soon as we are about to install the trunk cage on our shop car. That megan H-brace seems to tie the rear 2 pieces isntead of tying all 3. I'll to see if we have close ups of our customer's car that put it on. Thanks

Peter
What does the rear lateral bar of the trunk cage bolt to?

(the bar parrallel to the strut bar)

Also, can the front ladder bar be combined with the subframe reinforcement set? it seems as though the ladder bar could be used to tie the 3 seperate pieces together.

to the top

Interested in the Gt spec ALK. Does it come with subframe bushings and bolts in the kit? Also how much castor does it add? Any more info about this kit would be great. Trying to compare it to the Whiteline ALK kit in terms of what is included and how it works. Thanks....

Hey Peter, in your opinion will the fender brace make much of a difference on an STi? What are these made of(steel/aluminum) and how do these compare to the STi version other than they are cheaper?

-keith

Interested in the Gt spec ALK. Does it come with subframe bushings and bolts in the kit? Also how much castor does it add? Any more info about this kit would be great. Trying to compare it to the Whiteline ALK kit in terms of what is included and how it works. Thanks....

Hi, which subframe bushings are you talking about? Are you talking about the spacers? It comes with all bolts needed for install. i will find out for you about how much castor they are getting with this kit. Thanks

Peter

Hey Peter, in your opinion will the fender brace make much of a difference on an STi? What are these made of(steel/aluminum) and how do these compare to the STi version other than they are cheaper?

-keith
Keith,
Hi, for a stock sti, the difference would be negligable and most likely felt when at the limits. I'm pretty certain that these fender braces would shine with upgrade suspension, particularly upgrade springs, struts or complete coilovers. I'm sure these are made from the same aluminum they use for their other braces, but I will confirm. These should provide greater rigidity than the sti versions as the points it attaches too are much greater. I basically think the sti part is just upgrade aluminum instead of stamped steel. Let us know if you guys have any more questions. Thanks

Peter

Yes, I meant the spacers for the subframe. Can you tell me what is included with the kit and what kind of castor gain the kit provides? Thanks..

got any trunk cages -4 point or 6 point ---------------im getting ancious got to have one ...lol

got any trunk cages -4 point or 6 point ---------------im getting ancious got to have one ...lol
:-P I could tell. I'll PM you tomorrow on eta of the 6 pt trunk cages. Thanks

nice prices, i plan on getting the reinforcement bar and fender brace in a few weeks. how long will this pricing be going on?

nice prices, i plan on getting the reinforcement bar and fender brace in a few weeks. how long will this pricing be going on?

pm'd you :)

-Shuji

You say the Megan Racing coilovers fit GC chassis and 02-04 wrx/sti. Are you saying that the same coilover fits both or that you have different coilovers for each. Thanks.

You say the Megan Racing coilovers fit GC chassis and 02-04 wrx/sti. Are you saying that the same coilover fits both or that you have different coilovers for each. Thanks.
Hi, they are different coilovers since the GD coilovers do not fit the GC bodies. Thanks

Peter

CARBING Aluminum strut bar in stock!!!