Hi gang,

We've got a few misc. clearance items that have been around the garage for the past year. I'll take some pics later today but here is the small list.

JSP 04+ Carbon Fiber Hoods - 3 Available $250 local pick up only. These hoods literally cost us $525. JSP has a limited lifetime warranty. They are too expensive to ship so we are no longer carrying them. Hence the local pickup. This is a stupid deal but I just don't want them hanging around anymore. These are hoods only, you can fit your stock hood scoop or,

JSP 04+ Carbon Fiber Hood scoops - 2 available $99. These cost us MUCH more than that. I not overly happy with the final finish quality at the normal resale price of $259, however, at $99 I would be buy both with a smile on my face. They are nice hood scoops and from 6 feet away look mint, but the fine details are not to the standard of the products I prefer to sell daily. Again, at $99 they are a steal and look great.

Autometer Sport Comp 60mm gauge set - was a special order, we don't normally stock 60mm sport comps, not even listed on the website. This is a set of Boost, Oil Press and EGT. $285. Add an ATI Clock Pod for $119.

DriverFX Sport Reclining Seat - $75 - Blue/Black. Very nice gig for a product car or what not. If you want a matching second seat add $160. Will post pic shortly.

If anyone is interested buzz Daddy at 978-549-6120. Leave a call back number if you get the voicemail.

Rich

pics of the hoods!!!

STi style scoops??

sick price on gauges.....oye....damn you people and you're deals RIGHT when i get about $1000 in bills due!

**edit, if the EGT includes the probe, i might have to drive my ass to Leominster....does it?

Man If I had 99 bucks I would be all over one of those scoops

Sorry I didn't get to the pics today, but a couple of answers and additions:

The 60mm sport comp pack does come with a K probe for the EGT.

Adding few more clearance items:

SPEC Stage 3 STI Clutch(6 puck) and Aluminum Flywheel combo: $750(note, most ECU tuners can tune out the lightweight flywheel cel associated with lightweight flywheels). Selling in this combo only. Price is below cost. Again a special order that was never picked up and sitting around for the past year. I did part out the throw out bearing for a local who was desparate need recently, but this is being replaced. Like everything else on clearance, this stuff is brand new.

SPEC Stage I for RS/Legacy(pre 05) - $299

JSP - STi style rear wing w/brake light. Fiberglass. There is a hair line crack in this wing about an inch long which should be taken care of before you install. As is, $50.

JSP - WRX style rear wing with wing risers. Fiberglass. $75.

need to clear out your e-mail box so here's my pm message that couldn't be sent..... if it's a stupid question oh well....

$750 for the fly and clutch.... i have a stock 2002 wrx.... is it worth it? what would i have to do to make it work - tune? - just install and go? - i'm not sure so if you could throw some knowledge my way please.... thanks

Rich, those gauges in yet? check your pm box, thanks

Uhm.. you still have a hood and scoop kickin around?

Will the SPEC Stage 3 STI Clutch(6 puck) and Aluminum Flywheel combo fit a 2002 WRX?

TMS

any chance I could talk you into shipping one of those hoods??I REALLY WANT ONE..

Hi gang,

DriverFX Sport Reclining Seat - $75 - Blue/Black. Very nice gig for a product car or what not. If you want a matching second seat add $160. Will post pic shortly.

Rich

Rich what happened to this seat, thought you were bringing it to the dyno day? I could make an office chair out of it :alien:

yes? no? maybe?

Damn, wished i lived up Norf. ;)

T.Vo

Will the SPEC Stage 3 STI Clutch(6 puck) and Aluminum Flywheel combo fit a 2002 WRX?

TMS

From Daniel Coe @ Spec clutch

Chris,
To my knowledge they are not, the STI clutch has a 9.5in. O.D. and
the WRX is considerably smaller at 8 7/8in. O.D. Also the ring gear and
flywheel may have different dimensions that are critical to bell housing
clearance and starter engagement. Please feel free to contact me with
any
other questions.

Thanks,
Daniel Coe

sent pm

Hey interested in both hood and scoop. Can we get pics and more info + fitment for sti?

Sorry about the long overdue replies. I never subsribed to my own thread and it feel off my radar.

Everything is still available as I have got replies to folks and I've been away off and on over the last couple of weeks.

In regards to the SPEC Stage III it is strictly STi. Will not fit a standard WRX.

On CF Hoods, I still have three and I believe one scoop.

FX Seat - yes I still have it and it would make a great seat :) . We were suppose to have a van to transport good on the Dyno Day but things got botched up so we could only take what we could fit into a WRX Wagon(which was still quite a bit).

scottD - I'd be happy to ship a hood but the freight would run as much as the hood. This is the reaon the hoods are for local pick up only. Most vendors direct ship their hoods from the supplier. I always like to stock what I sell, but that was a mistake in the case of the hoods because UPS and FedEx won't ship them. I need to ship via Freight Carrier and that costs big $$.

Amber STi Clarity gauge should be shipping to us any day now.

- Rich

still hoping on a picture of that scoop

can i get a pic of the wrx wing with risers

still hoping on a picture of that scoop
do a search bro, go into vendor for sale classifieds, i'm pretty sure Rich has posted it in there. It's just a hood scoop in CF with a mesh grille

do a search bro, go into vendor for sale classifieds, i'm pretty sure Rich has posted it in there. It's just a hood scoop in CF with a mesh grille

im well aware of what a cf hood scoop SHOULD look like, what i want to see is what these DISCOUNT ones look like

im well aware of what a cf hood scoop SHOULD look like, what i want to see is what these DISCOUNT ones look like

go into vendor for sale classifieds, i'm pretty sure Rich has posted it in there.

Fitz
www.Flat4Racing.com

Hey guys,

Sorry for the late reply. I've been out of the state all week(and still am). The hood scoop is moot at this point because is sold last weekend along with a hood. Still have two hoods available. I've been insanely out straight the past couple of week which is why I haven't paused for the photos.

Rich

Rich check your emails.

The hoods are really nice for the price. I jus got mine today. Theres no damage to the CF, just 1 or 2 knots it the fiber, barely noticable.

http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTEzMzQ5ODZzNDEzZGZkMzF5NTQx.jpg

any 02-03 carbon fibre hoods available?

Rich let us know about those Amber Clarity Gauges please, thanks

-Eric

The hoods are really nice for the price. I jus got mine today. Theres no damage to the CF, just 1 or 2 knots it the fiber, barely noticable.

http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTEzMzQ5ODZzNDEzZGZkMzF5NTQx.jpg


Is that your bed? Are you sleeping with your hood man? :lol:

any 02-03 carbon fibre hoods available?

Still have 2. Same as pictured above.(thanks superhawk44)

Golfa - The Ambers were all pre-ordered/pre-sold by the time they arrived mid last month. We placed another order that is due in end of December. Boost, Oil Press, EGT, and also Oil Temp, and Water Temp.

Rich

It was the only safe place I could put it on to take a pic :p
Is that your bed? Are you sleeping with your hood man? :lol:

how much for the hood and hood scoop to 06371?

Still have 2. Same as pictured above.(thanks superhawk44)



Rich


For $100 ?????? If so Ill be taking one.

Yea I cant read.... :( long day.

For $100 ?????? If so Ill be taking one.

Hoods or hood scoops? The hoods are $250.

Rich

PM'ed you about the wing....

still have any hoods left

still have any hoods left

+1.

This was awhile back so probably not, but I'm still interested!

I'm interested in the gauge pack. Is the deal still on and do you have any pics of them?

I'm interested in the gauge pack. Is the deal still on and do you have any pics of them?
Rich is MIA....we would like some updates on this stuff but he's a busy guy..

Rich is MIA....we would like some updates on this stuff but he's a busy guy..
http://forums.nasioc.com/forums/showthread.php?t=988813

Thanks wizz...I forgot he was going away for a bit. Can't wait for the new headers and the hybrid TMIC!!

this is kind of a stupid question but i've seen 02-03 hoods with 04 05 sti scoops... would one of those carbon fiber sti scoops fit on my 02 hood or not?

you have any catch cans you could sell me at the WBM?