All parts are for a 2002 WRX Aspen white. Located in Portland. Local prefered, but will ship on your dime.
Stock parts not needed.

-----------------------------------------------------------------------

StopTech BBK (black calipers) Fronts only with SS lines and Axxis pads only 3k miles
328x28mm slotted 2 piece; requires compatible 17" or larger wheels
$1200
StopTech BBK Pic 1 (http://www.pdxtuning.com/featured_cars/Owen_files/PFF7_0004.jpg)
StopTech BBK Pic 2 (http://www.pdxtuning.com/featured_cars/Owen_files/BBK_0001.jpg)
*SOLD*

-TXS UTEC with Remote map switch
includes flat foot shifting / launch control harness.$600
Will work on 2002-2006 WRX's and Saabaru 92X
I will make sure is flashed with a base map for your setup. (within reason)
Engine Managment for $600! :disco:
*SOLD*

-FP16G Turbo 1000miles
Made 281whp 252wtq on my car $500
FP16G Stage4 Dyno Chart (http://www.pdxtuning.com/featured_cars/Owen_files/Owen_FP16G.JPG)
*SOLD*

-Perrin Catless Downpipe $200
*SOLD*

-Modified Stock injectors cleaned and flow tested $100
*SOLD*

-Perrin Uppipe Heat coated $75
*SOLD*

-IPD Front and Rear swaybars with endlinks $200
In a turn (http://www.owenkenc.org/images/AutoX/June/AutoX_03.JPG)
*SOLD*

-SubySolutions skidplate (*awesome part IMHO*) $75
*SOLD*

-JDM STi hood scoop. Damn near perfect if I do say so myself.
Hood Scoop Pic (http://www.pdxtuning.com/featured_cars/Owen_files/Owen1.jpg)
*SOLD*

-Defi Link v2 60mm Gauges; Black face, Green numbers, Red needles. Close match to WRX gauge cluster.
Boost [-1.0~2.0 (x100kpa)], EGT [2~11 (x100 deg. C)], Oil Temp [50~150 (deg. C)]; including sensors
Defi Gauge Pod (Black)
Defi Control Unit with 3 minute replay
In perfect shape, have been installed for almost 2 weeks. (except for EGT which has yet to be tapped and placed so it's totally unused)
$675
Defi 1 (http://www.pdxtuning.com/featured_cars/Owen_files/Defi_0002.jpg)
*SOLD*

-EcuTek 2002, 2003 Reflash.
I will make sure is flashed with a base map for your setup.
$475
Come on...you can't beat a reflash for $475!
*SOLD*

-HKS Carbon Ti Exhaust $350
*SOLD*

-USDM STi Struts Springs and Tophats. Good condition
$600
STi Strut/Spring/Hat setup (http://www.pdxtuning.com/featured_cars/Owen_files/Struts_0001.jpg) Will not separate.
*SOLD*

-Perrin Turbo Inlet with Perrin AFTA MAF section.
Very low mileage on these as well. In excellent shape. Nice upgrade.
Asking $200 for both.
Perrin Turbo Inlet (http://www.pdxtuning.com/featured_cars/Owen_files/TINLET_0001.jpg)
*SOLD*

-*Brand new* I never even got to enjoy them :furious:
Prodrive PFF7 Anthracite 5x100 18x8 with 51 offset
sell new for ~$350/each
225/40/18 KumhoMX Tires
$1350 with Stock wheels and good tires in trade
PFF-7 & KumhoMX Pic (http://www.pdxtuning.com/featured_cars/Owen_files/PFF7_0003.jpg)
*SOLD*

-Rear StopTech SS lines and Axxis pads unused $60
Rear Lines and pads (http://www.pdxtuning.com/featured_cars/Owen_files/StopTech_0001.jpg)
*SOLD*

waiting for pic of topmount and i might take it off your hands send me a message

is the 16g oil/water cooled or just oil?

is the 16g oil/water cooled or just oil?

is both but just sold. Sorry :o

If only i had the cash i'd take those brakes in a heart beat :( Was this a spontanious decision to sell owen?

If only i had the cash i'd take those brakes in a heart beat :( Was this a spontanious decision to sell owen?

Bummer, cause you totally need brakes.
Yes it was quite spontanious.

It wasn't spontaneous, it was from being surrounded by mad STi Powar all day, every day! :)

It wasn't spontaneous, it was from being surrounded by mad STi Powar all day, every day! :)

I have no idea what you are talking about. :alien:

:lol:

How does the IPD size compare to Perrin or Cusco Swaybars? Also, how are the endlinks looking?

How does the IPD size compare to Perrin or Cusco Swaybars? Also, how are the endlinks looking?

Same size as Perrin's bar 22mm 3 way adjustable rear. Endlinks are still in great shape. Just greased them up again on Saturday.

I am interested in the front & rear IPD sway bars if "p-townwrx" decides against purchasing them :banana: .

My newbie assumption is that the Sedans and Wagons share these parts??

They will look good underneath with the IPD skidplate I recently installed!

PM me if you want to go ahead with a deal.

Thanks

I am interested in the front & rear IPD sway bars if "p-townwrx" decides against purchasing them :banana: .

My newbie assumption is that the Sedans and Wagons share these parts??

They will look good underneath with the IPD skidplate I recently installed!

PM me if you want to go ahead with a deal.

Thanks

Yes works on the wag just the same
pic of the sway under the plate ;)
http://www.pdxtuning.com/featured_cars/Owen_files/PFF7_0004.jpg

Owen, I'll take the skid plate. You said it will be ready on Friday?

Owen, I'll take the skid plate. You said it will be ready on Friday?

Yes it will be ready Friday.

I'm interested in the PFF-7s. PM'ing you with a question.

Good question ZigZag. No, I don't wish to separate my wheels and tires. I'm loosing on this part of deal as it is.

Good question ZigZag. No, I don't wish to separate my wheels and tires. I'm loosing on this part of deal as it is.

Scratch that...I have a tire buyer, so an arrangment can be made.

Mossie 4 those sways are yours. I have been looking into getting that set for 3 months now but ended up getting a ECU and boost controller instead. I don't have the money for them now but its definintly a good deal and I would hop on it if I had the money.

Thanks P-TownWRX.

Bump for more parts. ;)

Thanks P-TownWRX.....PM sent kleinfreak....will wait to hear back.

Reply sent

so price on the defi's? I really want them!

Owen I got your message, I'll see you at the shop on Friday.

Owen I got your message, I'll see you at the shop on Friday.

Sweet, Sounds like it's going to be an all day event so any time should be good.

so price on the defi's? I really want them!

$700.00

hey are u willing to drop the price on the calipers??

hey are u willing to drop the price on the calipers??

I think $595 off a front BBK with only 3k miles in great condition is a pretty significant price drop. I'm going to hold firm at $1200 for now. :cool:

Sweet, Sounds like it's going to be an all day event so any time should be good.


Alright see you there then.

Screamin deal on EcuTek EM just added

Pics of struts and gauges posted

looking for just the ss lines I already bought some pads!

looking for just the ss lines I already bought some pads!

I'll send you a PM.

PowderMan420 Your mailbox is full.

I want your Utec

I want your Utec

LOL ok PM me I'll hook you up.

My car would be nice too, your getting rid of the defi? Won,t match new car.

Yeah, I'll have to jump up to the BF Amber style if I go with an STi.

~Bump. Prices lowered on remaining items

~Bump. Brakes are back on the market. Wheels and tires now on hold.

PM'd about STi Suspension

Parts and price updates

~Bump, Turbo Inlet and Afta Maf added.

~Bump, Intercooler pic added.
UTEC is back up for sale.

clear your PM box :)

Thanks for the heads up. Cleared.

Got reef?


(I emailed you back awhile ago...)

-Tad

Ohh...yeah, about that. I think almost everything is dead. I neglected it far too long. I've put all my rocks in buckets with a new batch of water and I'm sorting through the remains for left over critters. I'm not sure the SeaHare made it. The mangrove of course, is thriving. :lol: You still interested in the tree? It's free if you can stop by and pick it up tomorrow or Friday.

I'll take the tree!!! (and anything else salvageable...)

Where should I pick it up? (Feel free to PM the answer or call/email me)

-Tad

Pre-Christmas bump.
Few parts remaining.

Late post, jus wondering if you still got the rear ss lines and pads.

Sorry, I don't. I had forgot to update this post.

Rodney,, your message box is full, been emailing you though.