Google
 
Web NASIOC.com

View Full Version : Accessport/Boost help!


redrex04
02-16-2006, 08:55 PM
Alright i know this problem has been talked over plenty of times, but i cant seem to fix it! I recently bought a cobb accessport for my 04 wrx, which also has a cat-back exhaust and a BOV. I put the base map & real time map as the stage1/91. When i put it on live boost read, the highest i ever get is 9.8 psi!! I see everyone posting their stock wrx's reaching 13-14 psi and mine is no where close! I have done the Ecu reset, but with no effect, i also looked for boost leaks but there are none that i can see, does anyone know what to do? (Wrx Stock boost is 13-14psi right?) thanks!

-Andrew

Quack
02-16-2006, 09:01 PM
what gear are in? you may need the HWG map

redrex04
02-17-2006, 08:42 AM
I have tried it in 1st, 2nd, & 3rd gear, its the same in all three..., ill try that tho, but does anyone know the exact stock boost for wrx's?

-Kevlar-
02-17-2006, 08:45 AM
around 13.5 and dont reflash realtime over base if its the same map i was told (Cobb AP issues thread) that it can cause problems.....

STirocket
02-17-2006, 11:32 AM
Maybe the boost leak is your BOV... Try running it with the stock one.

dvang
02-17-2006, 11:35 AM
also max boost should be read in 4th gear. did you used to have a boost controller of any sort MB or EBC

anthonyrb98
02-17-2006, 11:36 AM
get a mechanical boost gauge and see what happens with that

kenzo415
02-17-2006, 12:36 PM
Don't have a BOV unless you have it properly tuned or have a turbo swap.

supermarkus
02-17-2006, 12:40 PM
I would definitely swap the stock BOV back on and check the BOV gasket for leaks.

wrxtuner13
02-18-2006, 06:39 AM
Hey is the HWG maps safe? if not why?
thanks
jeremey

-Kevlar-
02-18-2006, 08:19 AM
not sure why but they just say "use at your own risk".

redrex04
02-18-2006, 01:42 PM
I did have a mbc and then switched to an ebc, but they are both removed now because i decided to be nice to my car :) . I have tried to switch bov's but that doesnt help at all. if i shouldnt have the base & real maps the same but i want to be stage 1\91, how should i set it up, thanks!

scoobdude
02-18-2006, 02:15 PM
do you have the pill?

try the stock map to make sure you its not the map you are using

wrxdrvr
02-18-2006, 03:22 PM
sounds like you are missing the restrictor pill in the 1 st little vacume hose off the turbo. Check if it's there, squeez it in the midle and you should feel it there.

supermarkus
02-18-2006, 05:38 PM
Would have been helpful if you listed aftermarket boost control as one of your mods in the first place. Post 14 is probably dead on. This is a classic mistake new owners make, I hope you kept your original hoses.

redrex04
02-20-2006, 02:49 AM
i do not have aftermarket boost control, i DID months ago but took it off., I have tried everything, but nothins worked, im lost.

supermarkus
02-20-2006, 03:40 AM
By "everything" do you mean you followed the advice in post 14?