I had my car tuned at TurboXS and now added a FMIC with no probs and soon to add injectors (helix 860cc) and shortly after a turbo (fp green). The FMIC was fine but i know there will be issues with the injectors. Im going back to TurboXS as soon as i install the turbo. Does anyone have advice or experience in installing these in phases and what iam to expect. Is there any tuning on the UTEC i have to do to not encounter probs? Any advice except negative would be helpful
Eric

here are my mods

APS short ram
Invidia catless dp
Blitz Nur-spec exhaust
perrin pulley
TurboXS FMIC
Utec

I would do the injectors and turbo at the same time and get it tuned right away as you may experience problems running rich in its current state.

you will have to scale your injectors in the utec parameters. in the fuel section you will see something like. stock injectors cc... and right under it, it will say actuall cc's. just put in the new injector size and you will at least be able to drive it until you get a tune.

After the new turbo and injectors, just ask TXS for a base map for a green... or ask anyone here on the forum. There are SO many green setups running around on UTEC.