Hey I may be an idiot but... I need help with replacing the bulb's for my foglights on a 2004 wrx. I have the bulbs and got one of the covers off on the bumper but don't know what to do from there... help please!!!! :confused:

up up up, help

Check this thread ;)

http://forums.nasioc.com/forums/showthread.php?t=863920&highlight=fog+install

You DO NOT, I repeat DO NOT have to remove the bumper. All you should have to remove is the Fog Light bezels. My hands aren't that small and I was still able to change them by just removing the painted bezels. Just reach behind the foglight assembly from under the car and undo the clips, pull out the bulb, replace with a new one, not too hard to do. If your hands are small enough you could probably do everything from the front.

~REVNU

i just took out my fog lights yesterday.. it was a lot easier than i thought

you pop out the front bezel with a screwdriver.. undo the two clips under the car to get access to the back of the fog light housing. undo the two 10MM bolts and pull out. unclip the harness and your done