RavSpec
03-31-2006, 02:23 PM
http://ravspeconline.com/ecommerce/images/vfturbo.jpg
IHI- VF22 - $799.99 Shipped
Largest IHI VF series bolt on turbo for WRX STI. Full boost around 3300 RPM. Capable of 320 WHP. Capable of running up to 25 PSI @7000 RPM. Using P-20 housing. Comes complete with coolant pipes and turbo oil drain tube.
we will also included the uppipe to turbo and downpipe to turbo gasket .
IHI-VF30 - $799.99 Shipped
This turbo is come off the GD STi RA utilizing the exhaust housing of a VF24 with the compressor housing between a VF23 and a Vf22. This turbo will start to come on boost at 2800 rpm. Capable of 300 WHP with simple bolt on. Comes complete with coolant pipes and turbo oil drain tube.
we will also included the uppipe to turbo and downpipe to turbo gasket
we will also included the uppipe to turbo and downpipe to turbo gasket [/SIZE]
PE-1820F With Actuator (A/R 20 Housing)- $1599.99 Shipped
Comes with separative actuator. Running A/R 20 housing. Ball bearing turbo. This turbo allow you hit 350 to 360 WHP. Stock bolt on to 02+ WRX/STi. Full boost at 3800 RPM.
TD05H-16G Stock Bolt On Turbo (350 HP)- $799.99 Shipped
The TD05H-16G is a bolt-on upgrade for the WRX/STI utilizing a Mitsubishi TD05 16G compressor wheel in a TD05 compressor housing capable of supporting 350 HP maximum. The turbine section consists of a Mitsubishi TD05H high flow turbine wheel and shaft assembly and a 7cm 2 nozzle area turbine housing with an internal wastegate port and wastegate actuator calibrated at 9 PSIG. The center housing contains a water jacket and comes complete with coolant pipes installed. Optional actuators are available for this turbocharger in pressures ranging from 10 to 19 PSIG
we will also included the uppipe to turbo and downpipe to turbo gasket
TD05H-EVO III 16G Stock Bolt On Turbo (395 HP)- $999.99 Shipped
The TD05H-EVO III Big 16G is a bolt-on upgrade for the WRX/STI utilizing a Mitsubishi TD05 EVO III Big 16G compressor wheel in a TD05 compressor housing capable of supporting 395 HP maximum. The turbine section consists of a Mitsubishi TD05H high flow turbine wheel and shaft assembly and a 7cm 2 nozzle area turbine housing with an internal wastegate port and wastegate actuator calibrated at 9 PSIG. The center housing contains a water jacket and comes complete with coolant pipes installed. Optional actuators are available for this turbocharger in pressures ranging from 10 to 19 PSIG.
we will also included the uppipe to turbo and downpipe to turbo gasket
TD05H/TD06 -18G or - 20G Stock Bolt On Turbo (400~440 HP)- $1199.99 Shipped
The TD05H-18G or -20G is a bolt-on upgrade for the WRX/STI utilizing a Mitsubishi TD06 18G compressor wheel in a TD06 compressor housing capable of supporting 400 HP to 450 HP maximum. The turbine section consists of a Mitsubishi TD05H turbine wheel and shaft assembly and a 7cm 2 nozzle area turbine housing with an internal wastegate port and wastegate actuator calibrated at 9 PSIG. The turbine housing is ported and polished in the turbine inlet throat and wastegate port areas to improve exhaust gas flow and boost control via the internal gate. The center housing contains a water jacket and comes complete with coolant pipes installed. Optional actuators are available for this turbocharger in pressures ranging from 10 to 19 PSIG.
we will also included the uppipe to turbo and downpipe to turbo gasket
TD06H-20G - Bolt On WRX/STi (440 HP)- $1399.99 Shipped
The TD06H-20G is a bolt-on upgrade for the WRX/STI utilizing a Mitsubishi TD06 20G compressor wheel in a TD06 compressor housing capable of supporting 440 HP maximum. The turbine section consists of a Mitsubishi TD06H high flow turbine wheel and shaft assembly for maximum HP potential at high RPM on the 2.5L and a 7cm 2 nozzle area turbine housing with an internal wastegate port and wastegate actuator calibrated at 9 PSIG. The turbine housing is ported and polished in the turbine inlet throat and wastegate port areas to improve exhaust gas flow and boost control via the internal gate. The center housing contains a water jacket and comes complete with coolant pipes installed. Optional actuators are available for this turbocharger in pressures ranging from 10 to 19 PSIG.
we will also included the uppipe to turbo and downpipe to turbo gasket
BT Dominator I Garret Turbo Charger - Bolt On WRX/STi (480 HP)- $1599.99 Shipped
The Dominator I performance turbocharger is a bolt-on upgrade for the WRX/STI utilizing a proprietary Garrett T04E compressor wheel in a Mitsubishi TD06 compressor housing capable of supporting 480 HP maximum. The turbine section consists of a Mitsubishi TD06H high flow turbine wheel and shaft assembly and a 7cm 2 nozzle area turbine housing with an internal wastegate port and wastegate actuator calibrated at 9 PSIG. The turbine housing is ported and polished in the turbine inlet throat and wastegate port areas to improve exhaust gas flow and boost control via the internal gate. The center housing contains a water jacket and comes complete with coolant pipes installed. Optional actuators are available for this turbocharger in pressures ranging from 10 to 19 PSIG.
we will also included the uppipe to turbo and downpipe to turbo gasket
Zerosport Twin Spool Turbo (A/R 25) - Similar to PE1825- $1799.99 Shipped
This is the same turbo as the PE1825. As opposed to the single-exhaust entry turbine housing on the previous GDB model, the newer JDM GDB STi has the twin-entry, designed for smoother exhaust gas entry to the turbine housing without having exhaust interference. Torque and response at low to mid range are drastically improved by utilizing the ball bearing and the compressor wheel of big 70pai easily supports monstrous 400+ps of power all the way to the high RPM range.
we will also included the uppipe to turbo and downpipe to turbo gasket
****** TURBO + Upgrade Components ******
VF-22 or VF-30 Turbo Upgrade Kit For 02~05 WRX Only - - $1199 shipped
- VF-22 Turbo or VF-30 Turbo
- Walbro GSS-342, (255 L/H) Fuel Pump
- STI Pink Injectors (545 cc) or SARD 650 cc Injectors (for 02~05 WRX Only)
VF-22 or VF-30 Turbo Upgrade Kit For 04~06 STI Only - - $1399 shipped
- VF-22 Turbo or VF-30 Turbo
- Walbro GSS-342, (255 L/H) Fuel Pump
- PE 850 cc Injectors
Zerosport Twin Spool Turbo Kit For 02+ WRX/STI - $3799 shipped
- Zerosport Twin Spool Turbo
- Walbro GSS-342, (255 L/H) Fuel Pump
- PE 800 cc Injectors For WRX or PE850 For STI
- Zerosport Twin Spool JDM Downpipe
- GT SPEC Twin Spooo Header
- All Required Gasket
- STI Oil Pan (only WRX are required)
- Walbro Fuel Pump
IHI- VF22 - $799.99 Shipped
Largest IHI VF series bolt on turbo for WRX STI. Full boost around 3300 RPM. Capable of 320 WHP. Capable of running up to 25 PSI @7000 RPM. Using P-20 housing. Comes complete with coolant pipes and turbo oil drain tube.
we will also included the uppipe to turbo and downpipe to turbo gasket .
IHI-VF30 - $799.99 Shipped
This turbo is come off the GD STi RA utilizing the exhaust housing of a VF24 with the compressor housing between a VF23 and a Vf22. This turbo will start to come on boost at 2800 rpm. Capable of 300 WHP with simple bolt on. Comes complete with coolant pipes and turbo oil drain tube.
we will also included the uppipe to turbo and downpipe to turbo gasket
we will also included the uppipe to turbo and downpipe to turbo gasket [/SIZE]
PE-1820F With Actuator (A/R 20 Housing)- $1599.99 Shipped
Comes with separative actuator. Running A/R 20 housing. Ball bearing turbo. This turbo allow you hit 350 to 360 WHP. Stock bolt on to 02+ WRX/STi. Full boost at 3800 RPM.
TD05H-16G Stock Bolt On Turbo (350 HP)- $799.99 Shipped
The TD05H-16G is a bolt-on upgrade for the WRX/STI utilizing a Mitsubishi TD05 16G compressor wheel in a TD05 compressor housing capable of supporting 350 HP maximum. The turbine section consists of a Mitsubishi TD05H high flow turbine wheel and shaft assembly and a 7cm 2 nozzle area turbine housing with an internal wastegate port and wastegate actuator calibrated at 9 PSIG. The center housing contains a water jacket and comes complete with coolant pipes installed. Optional actuators are available for this turbocharger in pressures ranging from 10 to 19 PSIG
we will also included the uppipe to turbo and downpipe to turbo gasket
TD05H-EVO III 16G Stock Bolt On Turbo (395 HP)- $999.99 Shipped
The TD05H-EVO III Big 16G is a bolt-on upgrade for the WRX/STI utilizing a Mitsubishi TD05 EVO III Big 16G compressor wheel in a TD05 compressor housing capable of supporting 395 HP maximum. The turbine section consists of a Mitsubishi TD05H high flow turbine wheel and shaft assembly and a 7cm 2 nozzle area turbine housing with an internal wastegate port and wastegate actuator calibrated at 9 PSIG. The center housing contains a water jacket and comes complete with coolant pipes installed. Optional actuators are available for this turbocharger in pressures ranging from 10 to 19 PSIG.
we will also included the uppipe to turbo and downpipe to turbo gasket
TD05H/TD06 -18G or - 20G Stock Bolt On Turbo (400~440 HP)- $1199.99 Shipped
The TD05H-18G or -20G is a bolt-on upgrade for the WRX/STI utilizing a Mitsubishi TD06 18G compressor wheel in a TD06 compressor housing capable of supporting 400 HP to 450 HP maximum. The turbine section consists of a Mitsubishi TD05H turbine wheel and shaft assembly and a 7cm 2 nozzle area turbine housing with an internal wastegate port and wastegate actuator calibrated at 9 PSIG. The turbine housing is ported and polished in the turbine inlet throat and wastegate port areas to improve exhaust gas flow and boost control via the internal gate. The center housing contains a water jacket and comes complete with coolant pipes installed. Optional actuators are available for this turbocharger in pressures ranging from 10 to 19 PSIG.
we will also included the uppipe to turbo and downpipe to turbo gasket
TD06H-20G - Bolt On WRX/STi (440 HP)- $1399.99 Shipped
The TD06H-20G is a bolt-on upgrade for the WRX/STI utilizing a Mitsubishi TD06 20G compressor wheel in a TD06 compressor housing capable of supporting 440 HP maximum. The turbine section consists of a Mitsubishi TD06H high flow turbine wheel and shaft assembly for maximum HP potential at high RPM on the 2.5L and a 7cm 2 nozzle area turbine housing with an internal wastegate port and wastegate actuator calibrated at 9 PSIG. The turbine housing is ported and polished in the turbine inlet throat and wastegate port areas to improve exhaust gas flow and boost control via the internal gate. The center housing contains a water jacket and comes complete with coolant pipes installed. Optional actuators are available for this turbocharger in pressures ranging from 10 to 19 PSIG.
we will also included the uppipe to turbo and downpipe to turbo gasket
BT Dominator I Garret Turbo Charger - Bolt On WRX/STi (480 HP)- $1599.99 Shipped
The Dominator I performance turbocharger is a bolt-on upgrade for the WRX/STI utilizing a proprietary Garrett T04E compressor wheel in a Mitsubishi TD06 compressor housing capable of supporting 480 HP maximum. The turbine section consists of a Mitsubishi TD06H high flow turbine wheel and shaft assembly and a 7cm 2 nozzle area turbine housing with an internal wastegate port and wastegate actuator calibrated at 9 PSIG. The turbine housing is ported and polished in the turbine inlet throat and wastegate port areas to improve exhaust gas flow and boost control via the internal gate. The center housing contains a water jacket and comes complete with coolant pipes installed. Optional actuators are available for this turbocharger in pressures ranging from 10 to 19 PSIG.
we will also included the uppipe to turbo and downpipe to turbo gasket
Zerosport Twin Spool Turbo (A/R 25) - Similar to PE1825- $1799.99 Shipped
This is the same turbo as the PE1825. As opposed to the single-exhaust entry turbine housing on the previous GDB model, the newer JDM GDB STi has the twin-entry, designed for smoother exhaust gas entry to the turbine housing without having exhaust interference. Torque and response at low to mid range are drastically improved by utilizing the ball bearing and the compressor wheel of big 70pai easily supports monstrous 400+ps of power all the way to the high RPM range.
we will also included the uppipe to turbo and downpipe to turbo gasket
****** TURBO + Upgrade Components ******
VF-22 or VF-30 Turbo Upgrade Kit For 02~05 WRX Only - - $1199 shipped
- VF-22 Turbo or VF-30 Turbo
- Walbro GSS-342, (255 L/H) Fuel Pump
- STI Pink Injectors (545 cc) or SARD 650 cc Injectors (for 02~05 WRX Only)
VF-22 or VF-30 Turbo Upgrade Kit For 04~06 STI Only - - $1399 shipped
- VF-22 Turbo or VF-30 Turbo
- Walbro GSS-342, (255 L/H) Fuel Pump
- PE 850 cc Injectors
Zerosport Twin Spool Turbo Kit For 02+ WRX/STI - $3799 shipped
- Zerosport Twin Spool Turbo
- Walbro GSS-342, (255 L/H) Fuel Pump
- PE 800 cc Injectors For WRX or PE850 For STI
- Zerosport Twin Spool JDM Downpipe
- GT SPEC Twin Spooo Header
- All Required Gasket
- STI Oil Pan (only WRX are required)
- Walbro Fuel Pump