Does anyone see an issue with running a set of 17 X 8 WORK Emotions wrapped with a 245/40/17 on an 04 WRX dropped with Perrin springs?

1. Offset?
2. Make/Model of tire please.

+47

and either Bridgestone S03 pole positions or Yoko AVS Sports

My vote is it might rub... possibly. Roll your fender and you might be okay?

By my calculations you should be fine with the S03, but the AVS is questionable. The good news is that +47 is only 6mm off of stock :).

The S03 is 9" wide, a whopping 26 lbs, but 24.8" overall diameter, so you should gain a little torque to the wheels to make up for some of the loss due to weight.

The AVS Sport, however, is 9.8" wide, 25 lbs, and 24.7" overall diameter, and I'm not so sure you'll be rub-free under aggressive driving.

Take-off RE070's <---my recommendation.

070's in the same 245/40/17?

No, 070's in 225/45/17, and remember, the 225 070 is as wide as a normal 235, so you're not missing much, .1" compared to the S03 :).

im throwing on 245/40/17 bfg gforce's tommorow on my new 17x8 enkei rpf1's....ill update you on how they fit, im praying for no rub! i believe the enkeis are a similar offset, i got them so that they would clear sti brembos.

im throwing on 245/40/17 bfg gforce's tommorow on my new 17x8 enkei rpf1's....ill update you on how they fit, im praying for no rub! i believe the enkeis are a similar offset, i got them so that they would clear sti brembos.

Can you take some pix so we can see the shoulder, I'd like to know if they bulge at all, thanks :).