Wondering if someone with Streettuner could take screenshots of all the closed loop tables and send them to me? Thanks!

Might wanna specify what car and year.

Also in my version i don't have any "closed loop" tables. Most everything thing is based on either load or TPS.

I mean the closed loop tables on streettuner that define when to go to open-loop (they are under the fuel maps tab). Here's a list:

Closed Loop coolant temp
Closed Loop delay A, B, C, D
Closed Loop EGT
Closed Loop RPM
Closed Loop TPS
Closed Loop Vehicle Speed
Closed Loop TPS barometric low (02-03s only)
Closed Loop TPS barometric high (02-03s only)
Closed Loop barometric pressure (02-03s only)

I don't care what year WRX. If someone could take a screenshot of these tables and sent them to me I would be greatly appreciative.

No one? :(

Just need a screenshot - you could probably put these tables all on the same screen and take one.

Wirelessly posted (Treo 650: Mozilla/4.0 (compatible; MSIE 6.0; Windows 98; PalmSource/hspr-H102; Blazer/4.0) 16;320x320)

they are not worth a screenshot, but I will be happy topost them for you. Do you know what map you wanted them off of?

Wirelessly posted (Treo 650: Mozilla/4.0 (compatible; MSIE 6.0; Windows 98; PalmSource/hspr-H102; Blazer/4.0) 16;320x320)

they are not worth a screenshot, but I will be happy topost them for you. Do you know what map you wanted them off of?
Stock map if possible, but any will do (prefer 02-03, but any year will do). I'm editing my ECU with tools from the openecu project and I'm trying to get the closed loop parameters right. So, I need to know everything that is in each table not just the values themselves. For example, if the x-axis was rpm, I would need to know that plus what the rpm values are, in addition to y-axis values, etc. Sometimes these axis values are not on the ECU so it is hard to build the XML definition for them without these supplied values. Screenshots would show everything I need. Thanks! :)

Pretty please... :cool:

Just need screenshots for the stock map closed loop stuff (02-03 WRX), so you don't have to worry about giving out any highly sensitive Cobb secrets! Feel free to PM me.

someone told me that if i want to use street tuner i have to purchase it myself instead of using someone else's to tune. Is that True???

well just in case someone has a map. i have headers, up-pipe, TBe. intake

tea cup, you have a PM.

Boxer, yes you need street tuner in order to run a ST map. However ST maps can be shared. Also, in your quest for a map, you will need to mention year and car type.

Joe

scoobdude, your the man.. I have 2004 WRX. with once again. injen intake, XX tuning headers- up pipe, Perrin Turboback, single tip, ...I am in tri state area..

Do you have street tuner? If not a ST map will do you no good.

i am running Cobb AP Stage 2 93 Oct V. 130.. screw getting a protune ill spend the extra money for the ST.

i get what your saying, that is why i will purchase and ST and still share/ make my own

If you are in tristate and getting SreetTuner and need help, let me know.
Also, if you have never tuned or just learning, may want to consider a protune. I can not help you out with ProTune but can with streetTuner.
Cheers

Cool. I have a good begginig map for you to try. Boost is on the low side, but on my car its really smooth. I have not touched timing or fuel though. From there you can data log and work your way up or down as you sit fit. :)

cool, thanks guys.. your all big help.