So OK, I did part of the 60K service last weekend. When I was setting up to replace the fuel filter, I noticed that the hose was ripped, no fuel leaks though. Then I remembred that for the 15K service, I took it to my freinds mechanic. Now I need to replace the hose before replacing the filter.

Anybody here know the part number for this hose? It's the rubber hose from the tank and it connects to the "IN" side of the filter.

Thanks...Ian

Take your new filter to auto parts and buy a piece of the correct ID and length.

Take your new filter to auto parts and buy a piece of the correct ID and length.

Just make sure you get FI hose. Standard fuel hose has a lower burst pressure than FI hose. You don't want an engine fire.

Just make sure you get FI hose. Standard fuel hose has a lower burst pressure than FI hose. You don't want an engine fire.

+1. If you don't get fuel line, you run a very good chance of bursting the hose.



Mika

try www.subaruparts.com. They have diagrams you can use to identify part and PN.