We just got this from Cosworth this afternoon. What do you guys think?

http://www.rallysportdirect.com/shop/images/Cosworth/cosworthoilpump.jpg

From Cosworth's Press Release:

Designed to improve the oiling on modified engines. Each pump is disassembled
and inspected. Oil galleys are then honed to ensure unobstructed flow. We then incorporate a modified pressure relief valve to maintain pressure stability throughout the rpm range. Note: flow rate is unchanged This is an essential item on any high performance engine.

Application: Subaru EJ20/25 Engine 2002-06
Description: Modified oil pump with high pressure relief valve and installation kit.
Part #: KK3774
Suggested Retail: $239.00

Nick
RallySport Direct
www.rallysportdirect.com

I like

Will it work on my SOHC motor? If so please pm me a quote + shipping to 97060.

I just happen to need an oil pump, considering buying one from the stealership... ><.

Nick

I was looking for some type of performance oil pump a few months ago during my buildup - wish this had been around then.

-Keith-

Sko - You have a pm :)

CTKAG - I have a feeling these high pressure pumps will become more common, you should get one if your ever taking off your timng belt for whatever reason!!

Thanks
Rick

how hard is it to install? does the engine need to be lifted?

Phil Jr. - It really depends on your mechanical level. You will have to remove the engine, you could do it in the car but I find that it is much easier to just lift the engine. You have to take off the Main crank pulley, timing covers, timing belt, and inner timing covers to access the Oil Pump. The actual instalation of the pump is very easy, its getting to it that is the hard part.
Please let me know if you have any other questions
Thanks
Rick

Very nice!! Out of curiosity, how much is an OEM oil pump??

Very cool! Do you know if this starts life as the OEM 2.2L turbo oil pump? Those are supposed to have higher output in pressure and/or flow to help support the piston squirters that came on that engine, and have been the upgrade choice until this, which I'm sure is even better... especially if it starts as the 2.2T one :p

Anyway, I'll likely be picking one up for the pending engine build.... probably better than porting a stock one... although we'll probably port this one anyway ;)

Jeremy

InfamousDX - I cant seem to find the MSRP on the OEM pump, sorry.

Crucial - They should have started their life as the 2.0/2.5 Turbo Oil pump, then modified for higher pressure and ported for flow.

Thanks
Rick

just curious, are there better alternators, and water pumps (cosworth ect..)? If there are do you guys have them?

will this pump allow a built 2.5 to rev to 8k?
i know that oiling is a major issue in raiseing the limit.

ROC pit-bull - I know that those parts are avilable out their, they wont come from cosworth and I am unsure of who makes such a product.

JNorth85 - If any OEM pump could, it would be this one. The only thing better than this would be a custom oil pump or Dry Sump.
Let me know if there are any other questions
Thanks
Rick

Hey guys... do you have the oil pump in stock? I'd like to purchase but I want to make sure it's in stock. Thanks.

ROC pit-bull - I know that those parts are avilable out their, they wont come from cosworth and I am unsure of who makes such a product.

JNorth85 - If any OEM pump could, it would be this one. The only thing better than this would be a custom oil pump or Dry Sump.
Let me know if there are any other questions
Thanks
Rick


that is very nice to hear, i plan on a built block in the future and this would be one of the first things id do to it if 8k would be possible on the ej257. do you have any idea if there will be any testing regarding this issue?
thanks for all the help rick!

InfamousDX - Still waiting for them to come in.... Should be very soon now.

jnorth85 - I dont have any evidence of someone running the Cosworth pump and reving above 8K, But I think I know where to find out. I will get back to you shortly.
Thanks
Rick

You might want to cross post this into the built motor forum. While not technically kosher, this is a new product that specifically has built motor applications. If you get yelled at for cross posting, tell them I told you too. :)

InfamousDX - Still waiting for them to come in.... Should be very soon now.

jnorth85 - I dont have any evidence of someone running the Cosworth pump and reving above 8K, But I think I know where to find out. I will get back to you shortly.
Thanks
Rick


awesome thank you very much for looking into this rick.

HTTP://www.rallysportdirect.com/shop/images/nasioc/rick/Suby_on_Dyno1.jpg


This Cosworth Engine using the modified Oil Pump, Tested to 10,000 RPM, Redline is set to 9,500. :banana:

Thanks
Rick

HTTP://www.rallysportdirect.com/shop/images/nasioc/rick/Suby_on_Dyno1.jpg


This Cosworth Engine using the modified Oil Pump, Tested to 10,000 RPM, Redline is set to 9,500. :banana:

Thanks
Rick

is that a US EJ257?
if so what other mods are done to it to get it to rev to 9500!

I dunno what is done to the Engine, that is a Cosworth secret I assume. I thought I was going to have to give them my soul for these pictures.... :)
I *think* it is a 2.5 liter, wether that is a USDM block or something else, I know not.

Let me know if there are any other questions
Thanks
Rick

Please PM me when you have the oil pump's in stock. I want one!!!

-Matt

I will let everyone know when these beauties are in stock! :)
Rick

What is the ETA for these pumps from Cosworth ? Can you contact them and find out ? I need one like yesterday.........

TR

Thomas - You have a PM!

Thank you.

TR....... :disco:

You might want to cross post this into the built motor forum. While not technically kosher, this is a new product that specifically has built motor applications. If you get yelled at for cross posting, tell them I told you too. :)

Agreed. I posted a thread in the 2.5L forums about revving a Subaru motor to 10k, and oiling was one of the major issues discussed. If you could shed some light on the situation, the thread is located here (http://forums.nasioc.com/forums/showthread.php?t=1012275)

Still waiting to hear back on the Oil pump. I want to buy one, but I guess they dont want to sell them????

-Matt

how about some more details on that engine that seems to be able to spin to 10K... Are they building them for sale? or was is some one-off concoction??

Will this pump work with an EJ22T block?
If anyone had to take a guess by what factor would you say this pump is better than a stock EJ22T pump. I know this pump is new and not too many people have used it as of yet.
I am in the process of rebuilding an EJ22T (350-400 chp goal) and I am tempted to pick one up. From what I gather a stock EJ22T oil pump from the stealership is around ~$130 so additional $100 is not bad.

ShaggyGT- We did get our shipment in, however we had a BO list and all the pumps we got in were sent out. We are waiting on our next shipment to come in, once it does we will let you know. I would recomend to get on a BO list, that way when they do come in, you are guaranteed one.

not8player - This pump should work on the EJ22T without a problem, as the 2.0 ans 2.5 guys use the 2.2 pump on their blocks as well.

Please let me know if you have any other questions
Thanks
Rick

Preatty cool... Not something I need but cool none-the-less.

We now have a couple of these High Pressure Oil Pumps back in stock!!
Please let me know if there are any questions
Thanks
Rick
801.619.1779
Rick@Rallysportdirect.com
AIM: RickatRSD

Wasnt aware that there was a list. I said I wanted one when they were availible.... PM me information.

-Matt

Got one!!! Thanks Rick!!!

-Matt

Sweet!! We are almost out but a ton more are on the way so there should be no wait for anyone!! :)

Ben

Just ordered one!!! Please leave me feedback if you get a chance ;) . I hope they're in stock.

-Mike

Just ordered one!!! Please leave me feedback if you get a chance ;) . I hope they're in stock.

-Mike

Yes sir, we have plenty in stock now, feedback left as requested, once you recive your package, we would appreciate the same. Thanks again.

Well I've just ordered one of these from Rallysport, after my stock oil pump died on the dyno. :eek:

Lucky it didnt mortally wound my brand spankin new EJ207, although we tore it down and replaced the bearings just to be sure!

Looking forward to receiving it and getting my car back on the road! :)

Well I got it today....thanks Rallysport Direct!! :)

Woot!! :)
Let me know if you need anything else
Thanks
Rick

Shipping was super super fast to Australia too....5 days!

I was suprised to see that you had received the item that quick too. :)
Thanks again
Rick