Hey guys I did a search but the previous posts didn't help me much, I was wondering if someone could help me by letting me know how to adjust the light beams on my JDM sti projector headlights on my 2002 wrx. I know it's very simple and there is an adjusting screw but I'm not sure which screw it is to adjust the height of the beam. Can someone help me out and let me know which screw needs to be turned and in which direction to have the beam point a little higher.

Appreciate all your help
--Imran

i'm not sure how to adjust jdm's but on my morettes there are 2 adjusting screws per housing (2 high and 2 low). one for up and down, and one for side adjusting. i had to experiment with mine. heres a link on how to adjust the beam pattern. hope it helps.
http://www.humanspeakers.com/audi/headlight-aiming.htm#aim

bottom one counter clockwise will lower you beam.

Thanks guys for all your help I'll give it a try tonight and I'll let you guys know how it turns out.

--Imran