Got 4 point Harnesses...how do I wire the stock seatbelts now so that the light/chime will go off and all my airbags will still deploy during an accident?
I'm not very tech. savvy so if someone could list the parts and what not, that'd be great.

This needs to be a sticky!!!

cut the head :banana: off the belt off and leave it in the reciever :devil:That will do it.

There is a wire under your seat that connects to your seat belt connector. It looks like this:
http://img.photobucket.com/albums/v495/Yesitsdrew5310/Subaru%20Stuff/Corbeau%20FX1%20Pro%20Install/_DSC5717.jpg

Just disconnect it, buy some wire, cut a small piece off, and I mean small. Grab the wire that is going to the floor of your car, stick one end of the wire in one hole, and the other end of the wire in the other hole of the same connector. Grab some electrical tape and tape that baby up.

All that the seat belt does when it connects to the seat belt buckle is complete the circut. So the wire that your putting in is doing the same thing.

There is a wire under your seat that connects to your seat belt connector. It looks like this:
http://img.photobucket.com/albums/v495/Yesitsdrew5310/Subaru%20Stuff/Corbeau%20FX1%20Pro%20Install/_DSC5717.jpg

Just disconnect it, buy some wire, cut a small piece off, and I mean small. Grab the wire that is going to the floor of your car, stick one end of the wire in one hole, and the other end of the wire in the other hole of the same connector. Grab some electrical tape and tape that baby up.

thanks alot, that really helps me :)
we should have rep on this site... +1

Has anyone had the seatbelt lock itself malfunction, ie fail to complete the circuit even when the seatbelt is fastened? My warning light flashes on and off and it's annoying.