Step 7. Remove the adapter frames from the side of the stock stereo. Then, mount them to the side of your CD player (notice they say right and left on them. Right is the Passenger side), and universal pocket you also picked up from the store. This might take a couple trys to get the correct holes to line up, but be patient, and test fit your deck before hooking it all up.
Step 8. Clip the harness into the rear of your new deck, plug in the antenna, and clip the stereo ground on the right side. Re-install the deck using the factory (6) screws, and replace the stereo pannel and the shifter bezel. Congrats!!! Your done!