Camshaft cap install for ej25/ej22 sohc
m c k e o
p f l d n
1. oil journals and lobes of cam with engine oil
2.place correct cam in head
3. apply a 3mm bead of liquid gasket along outer edge of cam cap channel.
4. temporarily hand tighten bolts g through j (above sequence)
g ac e
f db h
5. install rocker assemblies and tighten bolts a through h in alphabetical order to 19.5 ft. lbs.
k i m
n j l
6. tighten torx plus bolts i through n in alphabetical order to 14.4 ft. lbs. using st 499427000
7. tighten bolts o through v (hex head) in alphabetical sequence to 8.6 ft. lbs.
8. tighten bolts w and x to 8.6 ft. lbs.
Sorry, my bolt label spacing did not take.