View Single Post
Old 06-15-2002, 06:18 PM   #10
milkman
Scooby Specialist
 
Member#: 8066
Join Date: Jul 2001
Chapter/Region: MWSOC
Location: Indiana,
Vehicle:
Y2K RSt
Sedona Mars Red Pearl

Default Thanks

OK, My engine is good, rings and all no problems there.

Oil is backing up thru the turbo, why I don't know.

The guy at Innovative Turbo Systems told me that the oil return line should be at lest 1/2" a # 10 I think. My line is NOT 1/2" I/D. I have 1/2" O/D braided steel return line which is just over 1/4" I/D and a 1/4" O/D feed line that has an I/D about half the return size.

I bought this ASR kit used, I had the turbo rebuilt and the turbine and shaft replaced. I talked to the guy who had it be and he didn't have a problem with oil going thru the turbo (he's a good guy and wouldn't misled me) he toasted his engine, in fact I pulled one of his rod bolts out of the turbo.

As for the oil return line routing, I have the oil pan tapped with the oil tube draining right on to the upper baffle, and the return line sloped at a 45`in to the oil tube tap.

The more I think about it, I believe it must be the return line size.

It's just an oil cooled turbo no water.
Thanks
* Registered users of the site do not see these ads.
milkman is offline   Reply With Quote