View Single Post
Old 04-03-2008, 02:19 AM   #67
99 rs
Scooby Specialist
 
Member#: 100994
Join Date: Nov 2005
Chapter/Region: W. Canada
Location: Edmonton
Vehicle:
2005 Acura NSX-T
2007 Outback 2.5i

Default

Both squirters mounted in the car with the shroud completely bolted up as a test fit. There is VERY LITTLE clearance between the top of the nozzle and the painted portion of the hood scoop. This is probably the main reason why the sti hood scoop is bigger (aside from larger size of course). There is literally no more room left to work with on the OEM RS hood scoop. It already pushes on the rubber tubing slightly.






And now that I’m done scratching the living crap out of the shroud I painted it to make it look good. In comes the bumper paint previously mentioned. In the picture the shroud is still wet which is why it looks patchy. It dried to a nice even coat.








The spray pattern of the sprayers. This is a dry piece of cardboard box.


This is after exactly 5 seconds of spraying
* Registered users of the site do not see these ads.
99 rs is offline   Reply With Quote