View Single Post
Old 04-25-2009, 02:20 PM   #56
TDagen
Scooby Specialist
 
Member#: 163648
Join Date: Nov 2007
Chapter/Region: MWSOC
Location: Minnesota, mpls
Vehicle:
2002 Wrx,2.5L,HTA86
E85,2007 6mt,No traction

Default

Well I was going to try and explain how "I" did it but a picture is worth 1000 words...

I disconected stock feed and return lines...


Since I Ripped my A/C out and it was very easy to get to, I used these for my passenger rail feed and my drivers side rail return... anyone could probably easily use them if you took the manifold off...


Then I just set up my lines...


I used the stock fuel rail feed as the feed for the driver side rail and I used the stock return line as the passenger side rail return...


Here is what I use for fuel pressure regulator also...


Just thought I would post up some pictures good idea gabedude....
* Registered users of the site do not see these ads.
TDagen is offline   Reply With Quote