View Single Post
Old 06-21-2009, 12:34 PM   #11
TheShadow
Scooby Newbie
 
Member#: 62558
Join Date: May 2004
Chapter/Region: SCIC
Location: GT909
Vehicle:
09 WRX
OBP

Default

Deactive/Disarm Factory Alarm
1. Sit in the driver's seat and shut all doors and rear gate.
2. Turn the ignition switch to the ON position.
3. Hold down the UNLOCK side of the driver's power door locking switch on the door and Open the driver's door within the following 1 second!
5. Wait 10 seconds without releasing the switch (holding the lock button).

The setting will then be changed as follows, as indicated in the odometer/trip meter display:
If the system was previously activated: The odometer/trip meter screen displays 'AL oF' and the horn sounds twice, indicating that the system is now deactivated.
If the system was previously deactivated The odometer/trip meter screen displays 'AL on' and the horn sounds once, indicating that the system is now activated.
* Registered users of the site do not see these ads.
TheShadow is offline   Reply With Quote