View Single Post
Old 07-25-2009, 12:40 PM   #15
Scooby Guru
Member#: 36333
Join Date: May 2003
Chapter/Region: NESIC
Location: East Kingston NH
DIY project: life
I need more TIME!


Originally Posted by morrocco88 View Post
This is how I put the assembly together: I put the upper snap ring on the shaft, slid the washer under that and slid the shaft into the tranny, so the washer comes in contact with the tranny case and the snap ring rides on the washer, then I put the gear on the bottom and put the lower snap ring on to hold the gear on, then slid the oil seal over the top of the shaft from the outside of the tranny....

Shaft = 32713AA002
washer = 803012060
upper snap ring = 8050121020
lower snap ring = 031512000
Gear = 32714AA230
Seal = 806712100

Let me know what you think

so this is how your ultimately put it back together so it worked ? just double checking cuz I'm assembling the speedo shaft as we speak.
* Registered users of the site do not see these ads.
IllNastyImpreza is offline   Reply With Quote