View Single Post
Old 08-18-2009, 08:20 AM   #12
mav1c
Hoodbridge!
Moderator
 
Member#: 560
Join Date: Nov 1999
Chapter/Region: MAIC
Location: Woodbridge, VA
Vehicle:
2006 STi, '11 A4
Crystal Gray, Silver

Default

Quote:
Originally Posted by iluvdrt View Post
What are the differances with the Brembo caliper, and the Subaru 2 pot caliper? Just the Caliper its self? I don't think there are any differance at all other than the Subaru/Brembo sticker.

If there are no differances between the calipers and they are the same (other than brand), the WRX rotor would fine since he would be using the WRX hub, and backing plate. I think the STi backing plate is taller than the WRX plate, that is why it can use larger rotors. It makes the caliper sit up higher. If he uses the smaller 06 WRX backing plate, it will place the Brembo caliper in the same position as the Subaru 2 pot which will allow for the smaller rotor.

I have the 06 rear hub, backing plate, 2 pot caliper and 06 rotor on my 98 Legacy. It fit fine with no problems at all.
Ugh. Stop spouting wrong information. The STI rear Brembo caliper is NOT the same as the Subaru rear 2-pot. The STI rear Brembos will NOT work with the WRX rear rotor.
* Registered users of the site do not see these ads.
mav1c is offline   Reply With Quote