View Single Post
Old 08-26-2009, 08:00 AM   #52
KillerBMotorsport
NASIOC Vendor
 
Member#: 198281
Join Date: Dec 2008
Chapter/Region: MAIC
Location: Virginia
Vehicle:
2005 WRX/STi
WRB of course

Default

Quote:
Originally Posted by AWDbawl View Post
I have been wanting to run EL headers but every oil pan thread i find has conflicting views on what needs to be purchased when going from the 2.0L to the 2.5L pan. It's either you just need a pan, or the pan and pick up or some other crazy combination. Can I get a little help on what all i should be getting pre-swap?
Thanks
Have you decided on a header manufacturer yet? Once that is decided we can move forward regarding the selection of a pan/pickup if need be.

I can tell you this... If you go from a WRX 2.0 pan to an STi (or 06+ WRX, Legacy GT, Forester XT) oil pan you WILL need to change the pickup too. The baffling is different, the angle of the pickup is different and the depth the pickup goes into the pan is different.

So let us know what header you decide on and we'll go the next step
* Registered users of the site do not see these ads.
KillerBMotorsport is offline   Reply With Quote