View Single Post
Old 02-13-2010, 11:25 AM   #6
ritky
Scooby Specialist
 
Member#: 72285
Join Date: Oct 2004
Chapter/Region: South East
Location: Stalking Scoobydoll
Vehicle:
2003 WRX PSM w/FXHID
FLA Turnpike > I-95

Default

Quote:
Originally Posted by Scooby921 View Post
Assuming you get the car to 3-wheel you still don't need to worry. The gas pressure in Konis is very low. Once the spring gets to full extension only gravity is pulling the spring further off the upper perch. 80% of the time its not going to be a problem. I bought helpers when I initially put a GC/Koni on my car. In the end I didn't bother using them. I ran the car competitively in STX for several seasons and never had the lack of helpers cause a problem.

Besides, when you consider the stack height of the helpers + the adapters is about 0.5", that's an additional 0.5" of compression stroke you're losing when you drop the lower perch down to maintain your current ride height.
If you read the "other" thread about droop then you'll see why this guy is concerned.....people on the other thread are claiming loose spring = death
* Registered users of the site do not see these ads.
ritky is offline   Reply With Quote