View Single Post
Old 04-03-2010, 01:51 PM   #7
xxscaxx
Scooby Guru
 
Member#: 86459
Join Date: May 2005
Chapter/Region: Tri-State
Location: Campbell Hall, NY
Vehicle:
2013 BRZ
SWP

Default

Swapping charges

NOTE: I am not responsible for your actions, again do this at your own risk! I trust swapping the charge than wiring into the airbag system. I only swapped bc my charge only had one plug in the back, and is single stage and the 08 is dual stage.
This is very simple. Unbolt the 4 10mm bolts, carefully lift out the charge, and place it into the 08 airbag.


swapped over


now if everything is good, you can reconnect the airbag. REMEMBER TO DISCONNECT THE BATTERY AGAIN AND WAIT, DON’T BLOW YOURSELF UP

reconnect everything…. Your done! Again once you get everything back together check to make sure it all works.


* Registered users of the site do not see these ads.

Last edited by xxscaxx; 04-03-2010 at 02:01 PM.
xxscaxx is offline   Reply With Quote