View Single Post
Old 02-07-2011, 10:57 PM   #4
Big-E
NASIOC Supporter
 
Member#: 123843
Join Date: Aug 2006
Chapter/Region: NESIC
Location: Connecticut
Vehicle:
2006 WRX Sedan SGM
Let LED's light your way!

Default

My manual is the Subaru Impreza 2006 Model Year Wiring book, which was issued April 2005, and printed in the U.S.A.

So, I know for a fact that this manual has some pre-2006 items in it, but none-the-less, I'll give you what I have.


NON HID HEADLAMPS

Left (F125)
1 Red = high-beam ground [that flows to the high-beam relay]
2 Yellow / Red Stripe = low-beam ground [that flows to the low-beam/DRL relay]
3 Black = ground to chassis for front clearance lamp (City Light) & North American side-marker
4 Black = ground to chassis for turn-signal
5 Red / Blue Stripe = main power feed for both low and high-beams
6 X
7 Red / Yellow Stripe = power feed for front clearance lamp (City Light) & North American side-marker
8 Black / Green Stripe = turn-signal power

Right (F126)
1 Red = high-beam ground [that flows to the high-beam relay]
2 Yellow / Red Stripe = low-beam ground [that flows to the low-beam/DRL relay]
3 Black = ground to chassis for front clearance lamp (City Light) & North American side-marker
4 Black = ground to chassis for turn-signal
5 Blue / White Stripe = main power feed for both low and high-beams
6 X
7 Red / Yellow Stripe = power feed for front clearance lamp (City Light) & North American side-marker
8 Light Green / Black Stripe = turn-signal power


HID HEADLAMP SYSTEM

Left (F125)
1 White / Black Stripe = high-beam ground [that flows to the high-beam relay and HID relay]
2 Black = ground to chassis for HID low-beam
3 Black = ground to chassis for front clearance lamp (City Light) & North American side-marker
4 Black = ground to chassis for turn-signal
5 Red / Blue Stripe = power high-beam
6 Red / Blue Stripe = power HID low-beam
7 Red / Yellow Stripe = power feed for front clearance lamp (City Light) & North American side-marker
8 Black / Green Stripe = turn-signal power

Right (F126)
1 Red = high-beam ground [that flows to the high-beam relay and HID relay]
2 Black = ground to chassis for HID low-beam
3 Black = ground to chassis for front clearance lamp (City Light) & North American side-marker
4 Black = ground to chassis for turn-signal
5 Blue / White Stripe = power high-beam
6 Blue / White Stripe = power HID low-beam
7 Red / Yellow Stripe = power feed for front clearance lamp (City Light) & North American side-marker
8 Light Green / Black Stripe = turn-signal power


Connector (both sides / non-HID & HID)
Top w/release tab
1 2 3 4
5 6 7 8
* Registered users of the site do not see these ads.
Big-E is offline   Reply With Quote