View Single Post
Old 04-29-2011, 02:51 PM   #53
68Cadillac
Scooby Specialist
 
Member#: 95901
Join Date: Sep 2005
Chapter/Region: SWIC
Location: Las Vegas, USA
Vehicle:
2004 WRX Wagon
White

Default

Quote:
Originally Posted by 68Cadillac View Post
To completely rebuild this guy you'll need the following*.
1 - AS568A Dash Number 037 O-Ring
1 - AS568A Dash Number 136 Square Cross Section O-Ring(or maybe 033 square or, 033 round or, 136 round)
1 - AS568A Dash Number 021 O-Ring
1 - AS568A Dash Number 015 O-Ring
3 - AS568A Dash Number 014 O-Rings
1 - AS568A Dash Number 013 O-Ring
? - Mystery size O-Ring*.
1 - Bearing (see above posts)
Quote:
Originally Posted by cracky View Post
its a shaft with a spring and ball bearing in it. no seals on it. just press fit in.

the hex bolt ID for the oring is 17mm.
thickness looks somewhat the same as the other small ones.(about 2mm)

1 - 2x64x68 (or 2x65x69)
1 - AS568A Dash Number 136 Square Cross Section O-Ring(or maybe 033 square or, 033 round or, 136 round)- unsure (though I think a 2.5x50x55 would work..square or round I cant confirm I one that fits but is 3mm and it just seems a tad big)
1 - 2x24x28
1 - 2x14x18(or 2x13x17)
3 - 2x12x16
1- 2x11x15
1- 2x17x21
1 - Bearing 12x17x40
1- oil seal full dimensions/specs unknown (though measured roughly ID 20mm and OD is about 32mm.)

9 orings total.
So the updated list of o-rings is:


1 - AS568A Dash Number 136 O-ring (not Square Cross Section just normal round)
1 - AS568A Dash Number 037 O-Ring
1 - AS568A Dash Number 021 O-Ring
1 - AS568A Dash Number 017 O-Ring (behind the 'hex bolt')
1 - AS568A Dash Number 015 O-Ring
3 - AS568A Dash Number 014 O-Rings (that's three total for full replacement)
1 - AS568A Dash Number 013 O-Ring
1 - Bearing 12mm depth x 17mm id x 40mm od (range in prices from $6 to $106 from McMaster)
1 - Bearing seal full dimensions/specs unknown (though measured roughly ID 20mm and OD is about 32mm.)
* Registered users of the site do not see these ads.
68Cadillac is offline   Reply With Quote