View Single Post
Old 01-18-2012, 09:16 AM   #20
Cobb Tuning
NASIOC Vendor
 
Member#: 4803
Join Date: Mar 2001
Location: Austin, DFW, Portland, SOCAL
Default

Quote:
Originally Posted by NA STI View Post
Can you use the stock map sensor for pure SD tuning? as long as your running under 23psi of course?
Yes, you can use the stock MAP sensor, but you have to make sure that you are not going to exceed the limits of your factory sensor under any conditions. For example, you may find yourself hitting a higher MAP under colder conditions. Also keep in mind that 23 psig is just a guideline as to the limit of the factory sensor - some factory sensors may not necessarily read that high (or become inaccurate near their limit). Just as if you maxed out the factory MAF sensor, maxing out the MAP sensor will cause you to go lean in SD mode as actual MAP is greater than reported MAP.

Bill
* Registered users of the site do not see these ads.
Cobb Tuning is offline   Reply With Quote