View Single Post
Old 03-26-2012, 10:35 AM   #68
pkL
Scooby Specialist
 
Member#: 313093
Join Date: Mar 2012
Chapter/Region: VIC
Location: Vancouver Area
Vehicle:
2012 Impreza 2.0i
5-door Sport. Dark Grey

Default

Quote:
Originally Posted by italia490

Installation was pretty easy. There are two tabs behind the reflector that you need to squeeze and the reflector pops right out. The directions are pretty straight forward and the reflectors can be wired to run as brake lights, running lights or turn signals. I cannot comment on wiring them up as turn signals since I wired mine up as brake lights. The wire coloring is the same as previous models however the configuration is different. The instructions indicated to tap into the pink wire for brake lights but as it turned out, this was for the running lights. The brake light wire is the green one.

The kit comes with everything you need. You'll just need a pair of wire strippers and a crimper plus a 10mm socket to remove the tail lights.
Thanks that sounds easy enough. I'll order a set then, as running lights the leds will just stay lit and doesn't really serve any other purpose?
* Registered users of the site do not see these ads.
pkL is offline   Reply With Quote