View Single Post
Old 06-07-2012, 06:22 PM   #290
wrxsomeday
Scooby Specialist
 
Member#: 141991
Join Date: Feb 2007
Chapter/Region: MWSOC
Location: Minneapolis, MN
Vehicle:
08 STi AW
12 Legacy 3.6R

Default

Current setup on my 05 saabaru wagon (same as a WRX):

Tokico D-Specs
RCE Yellow Springs with 1/4" spacer in rear (spring rates: 295 lb/in front and 275 in/lb rear)
DMS front Camber Plates and Group N rear top hats
-3.0 deg camber in front
-1.3 deg camber in rear
+4.4 deg caster in front

Current settings:
3 tffs in front
3.5 tffs in rear

Seems pretty comfortable now, however I want the best setup for autox. I messed with a few settings at the last test n tune:
3 tffs front and 3.5 tffs rear (only one run)
2 front and 2.5 rear (only one run)
1 front and 1.5 rear (only one run)
Went full stiff for the remaining ~5 runs

I'm thinking that the 0 tffs was probably a bit too stiff ...anyone run theirs 0 tffs for autox? I'm curious to see how stiff people run them for autox. I think there is def a point that the springs are over dampened!
* Registered users of the site do not see these ads.

Last edited by wrxsomeday; 06-07-2012 at 06:29 PM.
wrxsomeday is offline   Reply With Quote