View Single Post
Old 06-13-2012, 06:14 PM   #295
wrxsomeday
Scooby Specialist
 
Member#: 141991
Join Date: Feb 2007
Chapter/Region: MWSOC
Location: Minneapolis, MN
Vehicle:
08 STi AW
12 Legacy 3.6R

Default

Quote:
Originally Posted by hella_sti View Post
I've searched this thread and cannot find an answer if dspecs will work on my 2003 Wexford wagon with a set of aftermarket camber bolts? I'm assuming the fronts will be fine? I'll be running rce wagon specific springs if that matters at all
I'm assuming you mean WRX wagon...haha darn auto correct.

But YES the Tokico D-specs will work on your wagon (I have them installed on my wagon). The only thing to keep in mind is that you will lose about 0.7 degrees of negative camber in the front. The D-Specs are designed for WRX sedans, and since sedans have a slightly wider track in the front, you lose some negative camber when using a strut designed for a sedan (d-spec) on a wagon.

You can regain some of this camber this by installing sedan control arms, using camber plates in the front (Whiteline also makes top hats called the Com C, which offers more camber and caster. They are not adjustable, yet they offer some comfort and are fairly reasonably priced), or even aftermarket camber bolts in the front (to be used in the bottom hole only! - and retain the stock camber bolts in the upper hole).

Since you already have camber bolts, here is an excellent thread to answer any questions that you may have about camber bolts:

http://forums.nasioc.com/forums/show....php?t=1590221

hope this info helps...and remember...search is your friend.
* Registered users of the site do not see these ads.
wrxsomeday is offline   Reply With Quote