View Single Post
Old 08-16-2012, 11:25 AM   #5
wrxadam05
Scooby Specialist
 
Member#: 84070
Join Date: Mar 2005
Location: Philadelphia, PA
Vehicle:
2013 Honda Fit Sport
500whp GRB STI

Default

BELOW IS ALL PRE-BUILD, THIS WAS ON THE STOCK MOTOR

Got the car back up and running after being down for 2 months with a bunch of complications.

Shipped a tig welder down from our Minnesota location to me here in Texas. So I could fabricate some new parts we are going to be releasing for the Scooby market. (Catch cans, chassis specific oil coolers, drop in surge tank systems, etc etc etc) So I welded in my wideband bung, made a bracket for my FPR and a bracket for our turbo because I'm running an external wastegate.

Just fired it up two nights ago and went out last night for a little bit of tuning. At 22psi and still running around 11:1 A/F it feels great. Keeping it a little rich during WOT to burn up this tank of gas so I can fill it up with E85. I'm only going to use pump gas for long trips and such, so I have to get the drivability down with this tank and some mediocre power. I'm not going to dyno on pump gas with our turbo, only e85.

Here is some final pictures of the bay and the surge tank installed. Waiting on some steel stock to come in so I can weld up my catch can and get that PCV hose re-routed properly.













After I get tune it on e85 I'll post up some numbers and video. Then going to put on all my brake stuff that has been sitting around.

Cheers,
Adam
* Registered users of the site do not see these ads.
wrxadam05 is offline   Reply With Quote