Originally Posted by JF007
Funny I was just going thru the samething today, I pulled up the base that is attached to the shift boot and you should be able to seperate the knob from the shifter. It's the way the knob is pressed into the shiftboot, it seems like it just keeps spinning. Once you've loosen it enough you can just pull the knob from the boot.
Yeah, I used to just hold the shift boot from spinning and turn the shift knob, if you don't hold the boot it just spins the knob back. You can just pull the boot off the knob before you remove the knob though. It's easier that way.