View Single Post
Old 10-25-2012, 11:25 PM   #33
banshee04
Scooby Specialist
 
Member#: 179014
Join Date: May 2008
Location: Oklahoma City, OK
Vehicle:
'06 WRX/STi
Built Motor/6766/E85

Default

Quote:
Originally Posted by spoolinsti05 View Post
Well I'm going to try my third option and do a voltage drop test to see how it is. If it drop's anymore then .6v I'll ditch the FPC and run the pump 100% IGN on. I'll try to make a thread for this since the one's I've found are misleading mostly as far as maintaining the FPC. I see you picked 10ga the pump's are only like 16ga so your larger wire should help keep the drop to a minimum. Have you done a voltage drop test?
I have not done one. I already put my pumps back in the tank and I really dont wanna take them back out. I guess I could atleast measure the current at the relay to get a estimate of what it is. Yeah, I figured the 10ga wire would handle both of the power and ground 16ga wires coming from the pigtails of the pumps.
* Registered users of the site do not see these ads.

Last edited by banshee04; 10-25-2012 at 11:55 PM.
banshee04 is offline   Reply With Quote